best vintage golf clubs

What are the most collectible golf clubs?

The Most Expensive Golf Clubs Ever Sold at AuctionAndrew Dickson Putter -$181,000.Simon-Cossar Fruitwood Metal Headed Blade Putter -$165,000. ... Square Toe Lined Iron Golf Club – $151,000. ... Golden Putter First Lady Special Edition – $150,000. ... Long Nosed Scarped Golf Club – $91,000. ... More items...

Are vintage golf clubs any good?

There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.

What golf clubs are collectible?

Here's a look at 11 classic golf clubs or sets of clubs from the past and what they're worth today.Cleveland VAS 792 Irons.TaylorMade Burner Bubble driver. ... Titleist 975D driver. ... Callaway Steelhead fairway woods. ... Callaway Big Bertha War Bird driver. ... Ben Hogan Apex PC Forged Blade irons. ... Tommy Armour Silver Scot 845 irons. ... More items...•Nov 25, 2019

Does the age of golf clubs matter?

In short, the lifespan of modern golf clubs can be anywhere from three years, to a lifetime if repairs are made. However, the longevity of your golf clubs is entirely dependent on how frequently you play and how well you care for your clubs.Feb 20, 2019

Are 60 year old golf clubs worth anything?

Golf equipment is no different from furniture, rare wine and Chinese porcelain: old is often better then new—and a lot more valuable. Many clubs produced as recently as the 1950s and '60s are considered "classics." Some are worth $1,000 a set, and the right kind of sand wedge can bring $500 or more all by itself.Oct 6, 1980

Should I replace 20 year old irons?

Unless you play a ton and shut down the range nightly, there's no reason a set of irons shouldn't last five to ten years. In terms of tech, it depends what you want in your irons. If you play traditional forged irons, nothing substantial has changed in decades.Feb 5, 2020

What are old golf clubs called?

There were clubs called mashies and niblicks (and mashie-niblicks); cleeks and jiggers; baffies and spoons, among others. Today, we call such clubs "antique golf clubs" or "historical golf clubs," or obsolete or archaic clubs. Perhaps the better name, though, would be "pre-modern clubs."Dec 6, 2019

What are the most popular clubs on the PGA Tour?

What clubs tour players use. 26 percent of tour players use a driver, two fairway woods, an iron set starting at a 4-iron, and four wedges, which makes it the most common setup on tour.Nov 23, 2021

Do golf clubs hold their value?

Golf clubs on average depreciate by over 50% within 2 years and around 75% by the time they are 4 years old. So if you do decide to splash out on that new club you should just be aware that it is unlikely it will be worth anything close to what you paid for it in a relatively short space of time.

Do golf drivers go dead?

A golf driver can go dead and lose its pop when there is a crack, or defect, in the club face. This can be caused by faulty manufacturing or weakness in the driver head, and affects distance and performance.Apr 27, 2021

Do golf irons wear out?

Golf irons will go dead and wear out over time as their grooves and clubface deteriorate from repeated use. Golf technology is always rapidly changing, meaning irons that are older than five years of age are likely outdated and won't perform as well as the latest models.Dec 24, 2021

Do graphite shafts wear out?

Question: Do graphite shafts wear out, or does the flex change? Schnider: No, there is no fatigue factor. If you get something (a crack or fracture) inside the shaft (because of, say, airline travel), you will know it very quickly.Feb 4, 2013

Who designed the Bullseye putter?

Titleist Bullseye putter. PLAYER: Mark McNulty WIN: Liberty Mutual Legends STORY: John Reuter designed the venerable Bullseye blade in 1948 and Lew Worsham had the first tour win with it at the 1951 Phoenix Open.

What irons does Bernhard Langer use?

Bernhard Langer is one of those still using and winning with them, utilizing Ben Hogan Apex irons for his 3-iron through 5-iron. The version of the Apex Langer uses was introduced in 1999, a full five years before the Golf Digest Hot List began. CURRENT VALUE: $67.05 (set of eight, steel)

Who won the 2008 Sony Open?

PLAYER: Mark Wilson WINS: Sony Open in Hawaii; Waste Management Phoenix Open STORY: A Silver medalist on the 2008 Golf Digest Hot List, Cleveland's HiBore XLS 3-wood was in Mark Wilson 's bag during his wins in Hawaii and Phoenix (as well as Harrison Frazar's at the FedEx St. Jude Classic.)

What is a vintage putter?

OK. So, vintage putters are where you can start to see some serious value. This putter is a remake of the model Bobby Jones used in the 1930s and features a head made from nickel plating over copper plating over forged carbon steel.

What is the most copied putterhead?

PING Anser Putter. This is, hands down, the most copied putterhead design in the game's history. Karsten Solheim, founder of PING, developed this wildly popular design in 1959. Today, all the big manufacturers carry a putter with the same head design as the Anser. Estimated resale value today: $10.

When did the Foregiveness irons come out?

Foregiveness? These irons were designed for elite players. This particular set came out in 1984.

When were Tommy Armour Silver Scot 845 irons released?

Tommy Armour Silver Scot 845 irons. These beauties were released to the public in 1988. According to a piece from our friends at Hacker's Paradise from 2010 in a Q&A with clubmaker John Hoeflich, "The original forecast was 7,500 sets and I think we shipped over 30,000 in 1988. ". Imagine that.

When was the Big Bertha driver introduced?

Callaway Big Bertha War Bird driver. Introduced in 1998, this was a "must-have" for players craving more distance. Check out the size— or lack thereof—of the driver head. That, along with the club's low center of gravity, made the club playable off the fairway since it was able to get airborne quickly.

What was the first metal driver used in golf?

In 1978, a young clubmaker named Gary Adams came up what very well may be the most influential and monumental piece of golf club technology in the history of the game: the steel-headed driver. Nicknamed the “Pittsburgh Persimmon,” Adams’ steel driver featured 12-degrees of loft and was the first metal driver used by professional golfers on the PGA Tour.

What is Cleveland Golf known for?

Cleveland Launcher. Cleveland Golf is best known for their wedges and putters, but the Cleveland Launcher driver was a beast off the tee for amateur and pro golfers alike.

How many cc is a Big Bertha driver?

At a staggering 190 cc, the Big Bertha clubhead was by far the largest driver head on the market. While it would pale in comparison against today’s modern drivers, the original Big Bertha gave golfers of all abilities unprecedented distance never seen previously.

What is the titliest 983K driver?

There are some drivers that live to be legends and the Titliest 983K driver is one . With a 365cc full pear profile, it has a slightly larger head than it’s brother the 983E. It had what Titliest called “slightly heel-biased internal weighting and a deeper CG”, to create a moderate spin rate driver. People found themselves able to square up this driver much easier than other driver’s during it’s time and is one of the reasons it was any many golfer’s bags.

When was the Titleist 975D released?

Released in 1996 , the Titleist 975D driver might be one of the best-selling drivers of all time in addition to being one of the most influential. Featuring a massive 270 cc clubhead, the 975D continued on the marketing trend of “bigger is better,” promising incredible distance gains to golfers everywhere.

When was the first Persimmon Powerbilt made?

In fact, historians suggest that the first persimmon PowerBilt Citation rolled of the Louisville-based Hillerich & Bradsby Company assembly line as early as 1910. PowerBilt golf clubs continue strong to this day, but they may never produce a more popular and historic golf club than their original Citation.

What driver did Bubba Watson use to win the Masters?

Bubba Watson used a PING G30 driver to win The Masters in 2014, making this driver from the Scottsdale-based golf club powerhouse an instant icon. The G30 was also the first driver to feature “turbulators”; small, fish-fin-like bumps on the crown of the club to increase clubhead speed.

What are rare vintage golf clubs?

Rare vintage golf clubs have uncommon patents or features and were made in limited quantities that set them apart from the mass produced common clubs. Many feature wooden shafts. Many rare or hard-to-find golf clubs will have the following features:

What were the common golf clubs in the 1900s?

During the early to mid 1900s, common, inexpensive golf clubs were mass produced by companies such as Wilson, Spalding, Burke, MacGregor, Kroydon and many more. Common golf clubs can be identified by these traits: Phrases on the back such as accurate, superior, aim-rite, and other common sounding names.

How much does an antique golf club cost?

According to GolfWeek, the most valuable antique golf clubs can sell for as much as $80,000 at auction. However, it's not at all common to see this type of value. Most individual clubs sell for between $15 and $100 at auction or in resale shops. The key to knowing whether you have a valuable antique is researching and carefully assessing your club.

What were golf clubs made of before the turn of the 20th century?

Before that time, shafts were made of hickory, all iron heads were forged steel and woods were hand-carved from a single piece of persimmon. Clubs from before the turn of the 20th century can be worth quite a bit, presuming they were made by a prominent club maker and are in good condition.

How long has golf been around?

Some historians say the game of golf has been around for more than 500 years. Clubs and other equipment can be dated back to different eras throughout that time. To find clubs with significant value, you need to look back, definitely before World War II and probably before 1930, the year steel shafts and matched sets became common in golf club manufacturing. Before that time, shafts were made of hickory, all iron heads were forged steel and woods were hand-carved from a single piece of persimmon.

How much is a 1860s driver worth?

A driver from the 1860s hand-carved by Old Tom Morris or Laurie Auchterlonie in St. Andrews, for instance, could be worth a few hundred dollars or up to $20,000 depending on the model, condition and authenticity.

How much did a rake iron sell for in 1989?

One such iron, a rake iron designed to hit balls out of mud and water, was estimated to go for less than $300 at auction. It sold in 1989 for almost $80,000. Prices like these, while unusual, do happen now and again. Values in the vintage club market fluctuate wildly based on many factors.

Is collecting golf clubs a hobby?

Collecting antique clubs can be a fun and educational hobby. Having a collection of classic or antique golf clubs is not an unusual hobby. Developing a valuable collection, on the other hand, is a very different commitment. Like wine or antiques, classic and vintage golf clubs can appreciate in value over time.

When was the Hogan 1 iron first used?

A famous story first rose to the surface in the mid 1980s. A man in Texas purchased an old Hogan 1-iron out of a bargain bin. When he noticed the dime-sized wear mark on the sweet spot, he started to wonder if this could be the famous 1-iron used by Ben Hogan himself to force a playoff in the 1950 U.S. Open at Merion.

Is it a hobby to collect golf clubs?

Having a collection of classic or antique golf clubs is not an unusual hobby. Developing a valuable collection, on the other hand, is a very different commitment. Like wine or antiques, classic and vintage golf clubs can appreciate in value over time. Not every club appreciates or appreciates in the same way, however.

I BUY GOLF CLUBS - Vintage Golf Memorabilia, golf ..

PINECRAFT GOLF SHOP is always looking for collectible vintage golf memorabilia. Whether you have a vintage club like an old Scotty Cameron putter, a Ping Scottsdale putter or Masters badges/memorabilia we'd like to strike a deal with you. We want to buy your golf clubs, collectibles and memorabilia! Get an appraisal here for only $9.99! More ›

What are old, antique golf clubs worth?

If you've ever watched the show Pawn Stars you know that just because something is old doesn't mean it holds significant value, and that definitely applies to the golf clubs you see in barrels at... More ›

2nd Swing Value Guide

2nd Swing Value Guide is the industry's newest & easiest way to find golf club values online, providing golfers with the unique ability to trade in their old clubs and receive credit on 2ndSwing.com or to sell them outright. Follow the simple steps below to see what your clubs are worth & choose which payment option best suits your needs. More ›

Best Place to Sell Used Golf Clubs - SidelineSwap Blog

A site boasting over 50,000 clubs for sale with a 30-day Play Guarantee, 2nd Swing is a reliable website to sell or trade-in your old golf clubs. Unlike other sites, you don't list your clubs on 2nd Swing. You ship the clubs to the company, they evaluate the clubs and then make two offers. More ›

PINECRAFT GOLF SHOP - Sarasota, Florida - Buy Sell Rent ..

We buy, sell and rent golf clubs, golf accessories and golf memorabilia. We also have a great golf consignment program! PINECRAFT GOLF SHOP is located at 3419 Bahia Vista St. Sarasota, Florida. Please stop in or give us a call today @ (941) 706-4396. We have a large selection of quality pre-owned golf clubs, accessories and collectibles for sale.

Cash 4 Your Clubs! - Rock Bottom Golf

Looking for quality golf equipment at discount prices? Shop our discount golf store for your favorite golf brands at the best prices around. Cash 4 Your Clubs - Click For Details

TimV

What Make and Model do you believe were the Best Golf Irons offered in the 1980's and why?

augustgolf

I got my first set of Titleist Tour Model woods and irons in 1980 - outstanding set, as we have many a reference to here in other threads.

RSinSG

I traded a set of McGregor Golden Bears that I got in 1971 or so for a set of Eye 2's in 1982 or so. I played that set until 2006. I still have them and play them occasionally. They are the only "vintage" clubs that are somewhat comparable to today's modern GI irons.

Steele47

Remember both being solid sticks but if had to pick would go with the Wilson's on account of the more rounded lines. Then in around 86 gave in to a used set of Ping Eye's because they were just so easy to hit. Got rid of them and got Eye2's. Should have kept the original Eye's.

Chris122

I liked my Titleist Tour Models (first editions) at the time well enough, but having now compared them with other irons from the time, I can't say they are the best feeling. I do like the way they look at address, though, and that has influenced what I look for in irons even now.

Wriggles

I played Wilson Staffs from 1974 until 1989. Bought a set of Pal Joeys, good clubs. Traded them in for a set of Tommy Armour Ti-100s, at full price, yikes.

cardoustie

I had Titleist tour model blades but at some point moved to Taylormade TD preferred irons ('88 or '89 I think)