Golf-FAQ.com

club car golf cart clicks and stops when you press peral

by Amira Effertz Published 3 years ago Updated 2 years ago

If the battery is burnt out then it may cause the car to create the clicking noise. You can use a voltmeter to check the voltage of the battery. If the voltage is too high or too low, it means that the battery needs to be recharged fully. Try recharging the battery to its full capacity.

Why is my golf cart clicking but not moving?

A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.

Why is my club car precedent solenoid clicking but not moving?

Club Car Precedent Solenoid Clicking but won’t Move If a Club Car Precedent golf cart solenoid clicks but the golf cart is not moving, you need to check that the MCOR connection is not loose or damaged. If you have a club car precedent that doesn’t move, then it could be due to some simple internal issues that can be resolved quite easily.

What are the symptoms of an electric golf cart not starting?

On a gas golf cart, the most common symptom is the starter failing to engage – so the engine doesn’t turn over – while all you hear a series of very futile clicking sounds. On an electric golf cart, the most common symptom is the solenoid is not delivering electricity to the controller when the vehicle’s ignition is turned on.

Why is my electric golf cart rippling?

An electric golf carts' controller is known as the heart of the operation and closely resembles and operates much like the motherboard in a computer. So a problem with the controller will have rippling effects throughout the cart. A common function of the speed controller is to control the speed of the golf cart.

Why is my golf cart making a clicking noise?

Golf Cart Making Clicking Noise Typically, a clicking noise on a golf cart suggests that wheels drums may be touching the sides of the vehicle. You may also hear a click sound if your car has lost any bolts that are wiggling in place as you ride your cart.

Why does my golf cart go then stop?

In some cases, this happens because the coil of the battery is worn out or is too old. It can also be a sign of a faulty battery or even loose connections within the solenoid. Additionally, you could be dealing with overheated contacts. This is an issue you need to take seriously.

What would cause an electric golf cart not to move?

Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.

Where is the reset button on a Club Car golf cart?

Expose the motor (you'll probably need a screwdriver to remove the cover), and look for a red button. It is usually near the main power source, where most of the wires are connected. Once you've pressed the button to reset the motor, reassemble the cart, charge up the batteries, and give it a test run.

Why does my golf cart click but not move?

A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.

How do I know if my Club Car controller is bad?

X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.

How do I know if my golf cart solenoid is bad?

If your golf cart fails to turn on when you turn the key on, this is the most obvious sign of solenoid failure. The solenoid clicks a little with the ignition system in regular operation; in most cases, a failing solenoid will not snap.

How do you fix a golf cart that won't move?

When the cart won't move, you have to be sure that the batteries are sending sufficient power to the circuit. You must check the fuse. Use the voltmeter to check the voltage at the key switch. In a cart with batteries rated at 48V, it must show 48V at the key switch.

Why won't my golf cart go forward or backwards?

The problem could be with either the Run/Tow switch or Forward/Reverse switch or both. Check the switches to ensure that they aren't stuck midway. If they are, getting them released should help. However, if they show signs of wear and tear, you must get them replaced.

Do all golf cart motors have a reset button?

Electric golf cart motors have a reset button on their chassis which is designed to put your motor back into its original factory state. While it doesn't repair damage that may have occurred to the motor over the years, obviously, it does help to overturn any changes to the operation which may have occurred.

How do you test a controller on a Club Car?

How to Test Club Car Precedent Controller?Connect a voltmeter to the negative terminal on the battery.Connect the voltmeter to the M terminal on the controller.Push down on the golf cart pedal.A clicking sound should be heard.The batteries show a full charge.

How do you test a potentiometer on a Club Car?

4:2837:53Club Car 48 Volt Powerdrive Testing 1995-2013 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTest procedure two key switch if the vehicle being tested is equipped with a multi-step wiper switchMoreTest procedure two key switch if the vehicle being tested is equipped with a multi-step wiper switch potentiometer place the red positive probe of your vom.

Why does my golf cart keep powering off?

If the cart starts powering off after a new installation, then you will know that the issue is caused due to errors with the installation.

Why does my golf cart cut out?

Another reason why golf carts can cut out is due to problems with the battery voltage or water levels.

How to check battery water level in golf cart?

How to Check Battery Water Levels in a Golf Cart. Check if the voltages in both the batteries are at the designated levels. Also, if the water in the batteries has dried up, it could cause this issue. Check for the electrolyte and water levels in the batteries. Make sure that you are not overcharging or undercharging your batteries as these could ...

Why does my cart have a loose solenoid?

If the connections from the solenoid have become loose or if there is some other loose contact, the cart might behave in this manner. It can also be caused by a faulty motor or a faulty key switch.

What happens if you charge your golf cart?

You would have charged up your cart fully but after driving it around for an hour or two, the power would have got drained off completely. If this is a frequent occurrence with your cart, then you will need to take a look at the batteries.

Can you fix a golf cart on your own?

Under NO circumstances should you attempt to fix your golf cart on your own. Doing so is dangerous and could result in serious bodily harm. The information on this website has not been verified for accuracy and should only be used for general information purposes only. Use this information at your own risk.

Can you clean out a V glide?

You can also verify whether the wires and connections within the V-Glide assembly are not loose. Any dust or dirt that has managed to get into the assembly could also make the throttle to cut out. Cleaning out the assembly might also be a good idea.

Why does my golf cart make a grinding noise?

If your golf cart is making a grinding noise while running, the issue could be due to the bearings. The grinding noise is very irritating, and the problem is generally with one of the physical or mechanical parts.

Why does my golf cart beep?

Golf carts are designed to carry a specific load for a distance. Replacing the tires may put them under a great deal of pressure for their torque. If all of these efforts fail, you can inspect the batteries or the motor. If any of these have malfunctioned, then you may hear the beeping sound.

Why does my washing cart make a buzzing noise?

If the buzzing noise is coming right after you washed your cart, it could be because of the water getting under the floorboards. The best solution is to let the water dry well before using the cart.

Can you leave water in a F&R switch?

However, you may also have some water left in your F&R switch, or it could be because of water on the battery wires. This water-related danger is one you need to take very seriously.

Is it dangerous to drive a golf cart?

Golf carts sometimes make some weird noises, and most golf cart owners have experienced it. While these noises may not be dangerous, they can be irritating and a sign of damage.

Club Car Precedent 48v Intermittent Problem Question

I have a 2012 Club Car Precedent 48v electric cart that will suddenly stop working. It has brand new batteries, and seems fine, but randomly will not move when pushing the pedal. It will lurch forward then stop again, or it may work normal after changing the f/r switch, key switch, or even the run/tow switch.

Answer

It sounds like you are dealing with what we classify an intermittent problem. So, first things first, we need to reproduce the problem. Most likely, you are dealing with a connectivity issue. Essentially, what you are describing is a power outage to the system. The clicking noise you are hearing is the solenoid disengaging due to lack of power.

How to troubleshoot a golf cart?

GOLF CART CONTROLLER TROUBLESHOOTING 1 Make sure it isn’t your batteries! If your batteries are old and dead, then your golf cart will not operate. Charge them fully first and attempt to drive the unit. 2 If your batteries are fully charged and your vehicle won’t run, when you press on the accelerator pedal, then you should hear a clicking sound which will indicate the solenoid is engaging and allowing power to flow to your controller. If there is no distinct clicking sound, then check your solenoid. Also, it could have to do with something in the accelerator device as well. But, we can eliminate the controller as being defective. 3 If your batteries are fully charged and you get a clicking sound ensuring the solenoid is allowing power to flow to the controller, then you can begin inspecting the controller 4 Check all the wiring and signs of disconnection or damage. Also, most controllers will have an operation light that will begin to flash a morse code that will unveil the secrets of the problem. If that is the case and all of the above have been eliminated, then you are getting closer to determining it is the controller.

Why won't my club car run?

Due to their expense, you want to be sure your controller is the major reason and problem with your Club Car. First off, if your controller is bad, your vehicle won’t run. However, there are other reasons that could lead to your vehicle not running. Here are a few quick troubleshooting tips.

What does it mean when there is no controller?

When there is no controller, it means batteries drainage is at its peak, as motors can operate independently at their high speed, which would gradually increase stress on the mechanical and electrical components and let motors and batteries degrade quicker.

Does a golf cart controller degrade?

As a controller in the Club Car or golf cart is made up of electrical and electronics components, it degrades gradually over time with the frequency of usage. But usage is not the only factor, controllers and the Club Car parts may also degrade in case of non-usage. For example, if a golf cart is left for no use for a longer period, ...

Can you trust aftermarket controllers?

price difference. Generally, Club Cars are made with highly precise and quality ensured engineering practices, so you can easily trust the aftermarket controllers if you don’t want to spend much.

Do golf carts have solenoids?

In the old days of golf carts, a series of solenoids were used which was not an efficient means for battery management. As today’s technology does not use full-on DC Motors, instead there exist Brushless DC Motors and AC Motors by way of which operators have the option to drive the Club Car at varying speeds.

Can you fry a controller?

Power may be disconnect ed, however it is not worth the additional risk to fry a controller. Lastly, when tightening the wires back onto the controller, do not use power tools. Use hand tools so that you don’t over tighten and potentially strip the connection.

What is the controller on a golf cart?

An electric golf carts' controller is known as the heart of the operation and closely resembles and operates much like the motherboard in a computer. So a problem with the controller will have rippling effects throughout the cart. A common function of the speed controller is to control the speed of the golf cart.

Why do electric golf carts fail?

These carts can start to show signs of wear and may fail just like any other vehicle over time.

What are the problems with electric golf carts?

These carts can start to show signs of wear and may fail just like any other vehicle over time. Learn about some of the more common issues associated with electric golf carts. 1. Solenoid Wear. The solenoid is the primary electrical switch in your golf cart and is designed to ensure the current from the battery flows into the motor. ...

Why does my gas cart not work?

When you press down on the gas pedal and hear a tapping-like sound, this is the sound of the solenoid activating. When there is a disruption in the flow of the electrical current , your cart will not operate. A common reason for current disruption is solenoid wear.

What happens if your cart doesn't move?

If the cart doesn't move in either direction, both switches have failed. Diagnosing a problem with the direction switches isn't a complicated matter, but repairing the switch is more complex, especially if the switches are built into the speed controller.

Why won't my sped controller accelerate?

Problems with the sped controller occur for a variety of reasons, but most often the cause is degradation due to age or lack of use.

Why is my golf cart not accelerating?

When your electric golf cart does not accelerate, the first thing you need to keep in mind is that it is not a regular vehicle like your car . That's why the methods and solutions you use to get your car to start are not the same as the solutions you can apply to your cart.

What happens if your golf cart doesn't accelerate?

Bad Solenoid. If your golf cart does not accelerate, there is a possibility of the damaged solenoid. The solenoid is basically an electrical switch that enables the battery's flow from the battery into the motor. Check out the signs of the bad solenoid.

Why is my golf cart speed controller not working?

There are many reasons behind a speed controller malfunction. The most common problem that happens in the controller has aged due to infrequent use. These are just some of the issues that could be affecting your vehicle's acceleration. If you have trouble finding the issue of your golf cart accelerator, don't be afraid to take it to the mechanic.

How does a golf cart solenoid work?

The golf cart speed controller and solenoid are both controlled by the accelerator. The pedal is connected to the potentiometer. That means when you are pressing the pedal for acceleration, you are actually going through the potentiometer by pushing a rod. The potentiometer works as a communicator and tells the speed controller how much voltage it ...

Why is my golf cart not clicking?

On an electric golf cart, the most common symptom is the solenoid is not delivering electricity to the controller when the vehicle’s ignition is turned on. In normal operating conditions, the solenoid clicks on and off with the ignition switch. A failing solenoid will generally not click. Two things could be going on here.

How to check if a golf cart solenoid is silent?

On an electric golf cart, if the solenoid is silent – no clicking – use the setting voltmeter to DC volts using the 200 range. First, turn on the ignition while looking for a reading on the smaller terminals. If nothing is appearing, then press on the accelerator. If the needle doesn’t move, then the problem is not with the solenoid.

What does it mean when a golf cart solenoid goes bad?

Technically, in fact, a solenoid is a shape – a shape in which the length of something coiled is longer than the diameter of the coils. In engine starters, this refers to the smaller motor ...

Why do golf carts have solenoid?

The solenoid is simply there to allow electricity to flow freely to the controller and motor which will result in a running golf cart. RELATED: 4 Signs you need to Replace your Golf Cart Batteries.

Why won't my solenoid click?

The solenoid might not be getting enough electricity to do its work – which could be caused by loose connections, a weak battery or the coil wearing out.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9