Mix one-part shaving cream, one-part water, and two-parts dye in a small container and transfer the mixture to a squirt bottle. Fix it to the consistency of the mixture of your liking by adding more shaving cream if required. Step 3: Dye Your Disc
How to Dye golf discs?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
How much dye do I use to dye a disc?
I use about half a packet of the dye with enough water for the disc to float and not touch the bottom of the pan. Also I think if the water is at nearly boiling temp when you mix it, it helps produce more vibrant colors. Just my 2 cents. Good advice for dip dying.
What is the best worm dye for disc golf?
A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.
What discs won’t dye?
Discs that won’t dye are the low-cost plastics, like DX plastics. For the best discs to dye, it’s a draw between MVP Discs’ Neutron plastic, and Latitude 64’s Gold Line plastic. Colors appear very bright on both of them, and it takes a very long time before the dye starts to fade.
How do you mix iDye Poly for disc dyeing?
The best mixture I found contained 1/4 cup of liquid and 3/4 tablespoon of iDye Poly powder. I'll post more about colors and different amounts of dye powder in another article.
How much acetone do I mix with iDye Poly?
It's crucially important to stir, mix, and shake it all up until the dye is evenly distributed throughout the lotion. What is your Glue/Dye Mix? In the glue mix I use it is typically about 1 oz of Floetrol, 3 oz of white glue, about ¼ tsp of ProChem or iDye, and a splash of acetone.
How do you mix acetone dye?
If your really in a hurry you can use a high acetone mix. This method I fill half a shot glass of acetone and sprinkle RIT or Poly in and mix well and again let sit for ten before brushing.
How do you use lotion to dye discs?
2:3219:28Dye Academy 2021 - Lotion Beds Lesson with Bull-Winkel DyesYouTubeStart of suggested clipEnd of suggested clipSo look at look at the air bubbles in mine okay. Yeah well you're just going to kind of pop them upMoreSo look at look at the air bubbles in mine okay. Yeah well you're just going to kind of pop them up some people use a torch to kind of pop some of the bubbles.
How much water do you mix with IDYE Poly?
I just use 32 oz water and toss the idy packet into boilig water, simmer for like 15 minutes and call it done. I put the packet in a 32 oz jar then add hot tap water. Shake to mix.
How do you mix disc dye?
Just take the powdered dye and cut the side slowly using a scissor. The next step is to fill the 2 plastic cups with shaving cream. The two cups represent 2 colors and if you want more color, then you can add additional cups. Pour a small amount of dye into the small cups and mix it thoroughly.
How long should disc sit in dye?
Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
Do you need acetone to dye discs?
6:2638:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipIf you put acetone. Directly into a plastic container. From what i understand it is very likely thatMoreIf you put acetone. Directly into a plastic container. From what i understand it is very likely that it could melt through that. So definitely want to be careful with acetone as well it's flammable.
How do you use jacquard IDYE?
0:002:54iDye for Natural Fabrics - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse just enough water for the fabric to move freely agitate for 30 seconds or until the packet isMoreUse just enough water for the fabric to move freely agitate for 30 seconds or until the packet is completely dissolved once the packet has dissolved.
How long do you leave a disc in a lotion bed?
Let the die set for 2 1/2 to 3 hours or more for darker dyes, less time if you wish for a lighter look. Rinse the disc off in the sink and enjoy your new disc!
Does Rit dye work on disc golf discs?
"For those of you who have missed our old formula that dyed golf balls, golf discs and lacrosse heads, Rit DyeMore once again allows you to dye these items bright, beautiful colors. And it can dye your 3D printed creations too." Hopefully peacock green works better than their last green.
How do you spin dye a disc?
To apply the dye to the disc, use brushes or Q-tips. Dip your applicator into the dye solution and then gently place it on the disc as it spins. Don't use too much dye, and be gentle when touching the brush to the disc, as not to splash any dye onto parts of the disc you don't want to dye.
What is the best plastic for disc golf?
Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye. Also remember that the more curved your disc’s flight plate, the more dye drips you’ll experience and the more difficult it will be to place a template or design cut-out.
What is spin dye?
Spin Dye – one of the most elegant design types, requires a steady hand and spinning equipment. Splatter/Drip Design – Literally squirting or dripping dye on a disc to get a cool pattern. Cloth design – soaking a cloth or other material then letting it sit on the disc and leave a pattern. Shaving Cream Dye – (dry powdered dye is usually best ...
How to get rid of a vinyl disc?
This phase is simple, just make sure you’ve let the dye sit for long enough. Rinse in cold water for a few minutes. then remove all vinyl, fabric, or hot glue and rinse again. Scrub the disc lightly under running water.
Can you mix acetone with water?
It’s helpful to use a mixture of water and some chemical for the dye to set in , I recommend using acetone . Acetone is flammable so be careful with it. I devised an experiment to determine exactly how much acetone to mix with water and tested different rations.
Can you use squirt bottles for disc golf?
Shaving cream can also help prevent run-off, but again you need to make sure it’s evenly mixed and it can be a little more messy to work with. Basic (and not very exciting) disc golf drip dye. Squirt bottles are best used when you’re interested in an abstract splash or drip design and can be messy if you’re careless.
Can you tie dye a disc?
Soaked fabric can prevent the dye from running off or bleeding through and it can create some neat textures and designs. This method is also great for tie-dying a disc. Of course here you’ll need to make sure the fabric is touching all areas of the disc that need to be dyed and that the fabric is fairly evenly soaked.
Can you dye disc golf plastic?
Very difficult to get a deep color and fade and bleed within weeks. Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye.
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.
How to get a golf stamp off?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
Can you dye disc golf?
There are several methods to dyeing a disc golf disc, and the art of dyeing has been around for years. If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, ...
What plastics won't dye?
Discs that won’t dye are the low-cost plastics, like DX plastics. For the best discs to dye, it’s a draw between MVP Discs’ Neutron plastic, and Latitude 64’s Gold Line plastic. Colors appear very bright on both of them, and it takes a very long time before the dye starts to fade.
How to get goo gone off a disc?
Spray some Goo-Gone onto the disc (about ten drops worth is enough), and rub it onto all of the spots with residue. Give the Goo-Gone a few seconds to penetrate, and the residue will rub right off with your thumb or a piece of toilet paper. With this done, wash the Goo-Gone off the disc and you’re ready for Part II.
Do DX plastics dye?
For both methods, you’ll need a disc, obviously: Cheap, DX style plastics don’t dye. In general, the opaque plastics like Star and Gold Line, and transparent plastics like Champion and Opto Line take dye.
Do you need to rub shaving cream dye on a disc?
If you’re just doing a shaving cream dye, this part isn’t necessary, but make sure to rub down the disc well with toilet paper beforehand. The reason for this is that oil from people’s hands will be all over the surface of the disc, keeping the water-based dye from making contact.
Why are disc golf discs made of different plastics?
Some plastics are made to be harder and less vulnerable to damage (from tough throws like roller shots), while other discs are made to be softer and more flexible.
How to make a disc with hot glue?
For the Hot Glue Method, you’ll take a hot glue gun and place glue along the top of the disc where you want the disc to be patterned. Once the glue has dried, you’ll place the disc face-down in dye.
Why are disc golfers frustrated?
One of the major frustrations for disc golfers everywhere is the lack of choice involved in the appearance of your disc. Discs are manufactured with specific weights, measurements, and widths in order to suit a specific purpose, depending on the type of disc it is. One method many disc golfers use to personalize and customize their discs is ...
What color discs are easy to lose?
Sometimes, the perfect disc performance-wise is either a dark, dull white, or transparent color that is easy to lose. In order to decrease the risks of losing your disc, consider dying it a bright and easy-to-see color.
What color wheel looks good together?
The general rule of thumb with color wheels is that the colors on either side of your main color on the color wheel look good together, as well as the one opposite your main color. The color calculator will provide a more in-depth and visual explanation though to help you make the right choice!
What is DiscGolfWarrior.com?
DiscGolfWarrior.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. As an affiliate, this website earns from qualifying purchases.
Does dye affect disc golf?
Although, there are some disc golfers who take issue with the concept that dye will not affect a disc.
About The Tutorial
Setting Up The Dye
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
Stencil Dyeing
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
Shaving Cream Dyeing
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
Final Words
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.