The main cause of a Yamaha golf cart clicking but not moving, is a faulty controller or solenoid. The battery has to be checked first to see if it’s delivering the right voltage while in the idle state as well as when the pedal is pressed. There can be other reasons for the Yamaha golf cart not moving though you hear the click.
Full Answer
Why is my golf cart clicking but not moving?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
How to fix a golf cart that won’t run fast?
Lift the cart on jacks. Switch the ignition ON. Move the F/R switch to Forward. Now, press on the gas. Check if the green lights come on and what stage. Do the wheels turn and run fast? This way, you will be able to identify if it is a pedal box trouble and can take care of it. The Forward/Reverse switch is the issue on many occasions.
How to fix Yamaha golf cart solenoid not clicking?
G16 Yamaha Golf Cart Solenoid Not Clicking 1 Take a jumper wire. 2 The ignition key must be in the switch and it should be in the Start position. 3 Connect the battery posts to the two posts on the solenoid, either to the positive or negative post. 4 If the cart spins over, then your solenoid is not the issue. More items...
Why won’t my EZGO golf cart move?
There are several reasons why your EZGO golf cart won’t move though you can hear the click from the solenoid. Some of the common reasons are as follows: The battery pack is not able to crank up sufficient power when the pedal is pressed. The high current circuit could be faulty.
Why does my golf cart click but not move?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
Why is my golf cart making a clicking noise?
Golf Cart Making Clicking Noise Typically, a clicking noise on a golf cart suggests that wheels drums may be touching the sides of the vehicle. You may also hear a click sound if your car has lost any bolts that are wiggling in place as you ride your cart.
Why does my gas golf cart not move?
The main reason why a EZGO gas golf cart will not go forward is because of a locked up brake, or a faulty solenoid and accelerator. A defective Run/Tow or Forward/Reverse switch can also cause a EZGO to not move forward.
Why does my golf cart not accelerate?
Bad Solenoid If your golf cart does not accelerate, there is a possibility of the damaged solenoid. The solenoid is basically an electrical switch that enables the battery's flow from the battery into the motor. Check out the signs of the bad solenoid.
How do I know if my golf cart controller is bad?
X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.
How do I know if my electric golf cart solenoid is bad?
Press on the accelerator while the key is turned on and the cart is in forward.The solenoid needs to be replaced IF the voltmeter shows a full battery voltage without a click.If your voltmeter stays at 0, the problem stems from somewhere else in your cart.
Why won't my gas golf cart go forward or reverse?
Electrical Issues For example, if your run/tow switch has malfunctioned, your cart won't go forward or backward. This switch is designed to change your cart's operating mode from normal operation to increased power for towing. Check the switch to make sure that it isn't “stuck” between the two modes.
What would cause an electric golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
Where is the reset button on a ezgo golf cart motor?
Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.
Where is the speed sensor located on a Club Car golf cart?
The speed sensor in a Club Car Precedent golf cart is located on the back of the motor. To remove the sensor, unplug the cables behind the motor. You can use a 5/16-inch socket to remove the pigtail connector and pop off the plastic housing that encases the speed sensor.
How do you troubleshoot a gas golf cart?
InstructionsCheck the gas tank to make sure there is enough fuel for operation. ... Remove the oil dipstick and check that the oil level is at or just above the add or fill maker. ... Inspect the battery of the golf cart. ... Examine the wiring and switches. ... Remove the air filter from the engine to access the carburetor.
How do you test a potentiometer on a golf cart?
Use an ohmmeter to test across those two wires, either at the controller or at the potentiometer. If you have a 0-5K ohms golf cart potentiometer, you would expect for the reading to be at zero and slowly progress to 5,000 ohms at pedal down position.
SOLVED: Push Pedal nothing happens - Golf Cart - iFixit
My electric golf cart will not go uphill and losses power quickly.
Why is my Yamaha golf cart not moving?
The main cause of a Yamaha golf cart clicking but not moving, is a faulty controller or solenoid. The battery has to be checked first to see if it’s delivering the right voltage while in the idle state as well as when the pedal is pressed. There can be other reasons for the Yamaha golf cart not moving though you hear the click.
What to do if your G9 golf cart is not clicking?
If you find your G9 Yamaha golf cart not starting nor clicking, check the key components for damage. If you find the parts to in good condition, check the brushes in the starter/generator.
Why is my solenoid not clicking?
The reason why the solenoid is not clicking could be that it is faulty or has no grounding. Experts recommend checking all wiring and cable connections to rule out this possibility. Batteries on your G16 Yamaha golf carts should raise sufficient power to reach the solenoid and the starter/generator.
What is a faulty controller?
The controller is one major component that may have to be replaced. A faulty controller can stall the cart and the click you hear must be from the solenoid. Test the solenoid to see if it is functioning properly. You will require a multimeter, preferably a digital one, or a DVM for this.
Why is my club car not moving?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
Why won't my club car DS move?
If your club car makes a clicking sound but doesn’t move, the issue could be due to a faulty battery or damage to the internal controller. Check whether the batteries are working fine. Use a voltmeter to check the static voltage of the batteries.
Why does my motor make a clicking sound?
The clicking sound that you hear is made by the solenoid. There are many reasons why this could be happening. If the battery is down you might hear the solenoid click. If the wires between the solenoid and the motor are not connected properly, the solenoid might make this sound. If the motor or the controller is damaged then again, ...
What are the components of a motor that are burnt out?
The most common components to be burnt out are the brushes. You can easily get the brushes from one of the cart dealers and replace them. Check the solenoid to see if it is working correctly.
What does it mean when your club car battery is too low?
If the voltage is too high or too low, it means that the battery needs to be recharged fully. Try recharging the battery to its full capacity. If the voltage still keeps fluctuating, you may have to replace the battery. Check for a similar brand and model suitable for your club car.
Can a car controller be defunct?
In most cases, the controller could have become defunct after many years of use. You can take out the controller and test it to see if it is working correctly. The resistance coil can also prevent the car from moving forward. It is often found that the resistance values are out of the normal range.
Why is my cart left in the off position?
Some cart owners may fix a hidden switch that is left in the OFF position to prevent thefts. Check if your cart has one. Check all the connections to confirm that there are no loose wires or if some cable is hot and not functioning as it should be. Sometimes these actions are enough to solve the issue.
How to check if a 1996 Ezgo golf cart has batteries?
Here’s a recap of how to check if the batteries in your 1996 EZGO RXV golf cart are in proper shape or not. Use a good quality DVM. Tape the meter to the pack mains. Check the voltage when the cart is idle.
What to do if your RXV cart starts moving?
Try to move the cart; if it starts moving, then you should change the emergency/parking brake. The reason for this is that the RXV model is designed with this feature that if the brake fails, the cart will not run. You may be misled into thinking that the motor is faulty, but it could be wrong.
How many volts does a 6V cart battery have?
Equally critical is to check that the individual batteries of 6V show at least 6.37 volts, when fully charged. If you are satisfied that your cart batteries show these voltages, then you can move on to the other possible reasons for the cart not moving.
Can you handle a golf cart?
Many users of the latest model golf carts don’t realize that these are more computer-controlled and highly sensitive. You cannot handle them as you would the older models of carts. There are occasions when users have ended up burning out the whole system without knowing what they have done.