To keep it simple at first, use your own driver as a benchmark and try to identify how your shaft flexes. If you typically hit it high with minimal roll, then try a stiffer shaft. If you are having trouble getting a higher launch angle on your ball and only hit line drives, then more flexibility may be the right shaft for you.
Full Answer
Why can’t I hit my driver well?
That’s a big mistake because the driver is one of the most used clubs on most courses aside from the sand wedge and putter. Practice frequently with your driver and you should be hitting your driver more consistently in no time. You have bad tempo. If you haven’t mastered your tempo, then you’re probably not hitting your drivers well very often.
How to tee up a driver in golf?
You typically want about half the ball to sit above the face of the driver when you tee it up. This makes is easier for you to hit up on the ball and elevate the ball off the tee. 2. Stance You also want to tee the ball up in the forward portion of your stance, just inside the lead heel.
How to hit a driver consistently?
Before you even think about your swing, you need to tee the ball up. This might seem simple, but it is a key for hitting the driver consistently as you want to have the ball teed up at a uniform height every time. You typically want about half the ball to sit above the face of the driver when you tee it up.
How important is hitting a driver off the tee?
The driver is one of the most important clubs in the bag, and you will hit the club on a majority of holes in any given round. Because of this, it is extremely important to nail down the fundamentals of a driver so you can wield the big stick with confidence. Read below or check out the video above for five keys for hitting a driver off the tee.
Why do I struggle to hit my driver?
The main reason why you can't hit your golf drive anymore is because your gripping the shaft too tight, not having enough swing speed, or your using the wrong golf club. There are many possible reasons why you can't hit your driver as well as you did before. You may be: Holding your driver with a grip that's too tight.
What do you do when you can't hit a golf ball?
3:4513:43HIT THE GOLF BALL FIRST - THE EASY SWING DRILL - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're on turf roughly where you're hitting it if you're going kind of range Matt then you canMoreIf you're on turf roughly where you're hitting it if you're going kind of range Matt then you can obviously kind of put ball down and see where you hear any but you can do is you can use a foot spray.
Does getting fitted for a driver Help?
Length: A custom fitting is important when determining the correct length of your driver shaft. Having the proper shaft length can help you achieve consistent contact and lead to more distance off your drives.
Should high handicappers get fitted for a driver?
Whether you're a high handicapper looking to hit more consistent shots, or whether you're a tour player looking to refine and build confidence, fitting is measurably beneficial.
Why can't I drive a golf ball?
Golfers who are tense or anxious when they address the ball have trouble generating maximum clubhead speed. Tight muscles cause the swing to be shorter and slower. Your goal is a long, loose swing not a short, tight one. Consciously think about relaxing your shoulders before you begin your swing.
Why can't I hit a golf ball all of a sudden?
For golfers who, all of a sudden, can't hit a golf ball, chances are the balance is being lost on the backswing. As you take the club back, weight needs to transfer to your right leg and then to the left foot as you swing the club through.
How do I prepare for a driver fitting?
Things to Look for During a Driver FittingConversation/Interview.Bring current driver for comparison.Pay attention to what is added to the club during the fitting.Put a priority on ball speed instead of smash factor.Pay attention to which fitting elements are addressed.
How much does a driver fitting cost?
Driver only fittings typically cost from $50 to $175 as do 'irons' fittings. Wood/Hybrid and wedge custom fittings can be cheaper at $40 to $150 but golf club fitters will often 'refund' fitting costs if you buy clubs afterwards.
What do they do at a driver fitting?
A Driver Fitting is a detailed process. It involves the customization of all the major aspects of a driver that can affect the playability, feel and overall performance of the club. Our trusted advisors use industry-leading TrackMan* technology to elevate your game.
Is a club fitting worth it for high handicappers?
Custom fitted golf clubs can benefit every standard of golfer and particularly high handicappers. High handicappers are very inconsistent ball strikers and fitted clubs both increase the chances of hitting the ball out of the centre of the clubface and maximizing how far and straight mishits go.Should High Handicappers Get Fitted Clubs? The Benefits Apply to Allhttps://golfingfocus.com › should-high-handicappers-get-...https://golfingfocus.com › should-high-handicappers-get-...Search for: Is a club fitting worth it for high handicappers?
Does golf club fitting really make a difference?
Is it worth getting custom fit golf clubs? The simple answer is yes, it's definitely worth getting custom fit golf clubs. If you were to look at the back of a typical set of off the shelf clubs, they would usually have various markings on them as well as loft and lie angles.Why You Need Custom Golf Clubs - The Golf Guide - TGW.comhttps://www.tgw.com › golf-guide › why-you-need-custo...https://www.tgw.com › golf-guide › why-you-need-custo...Search for: Does golf club fitting really make a difference?
How long should a club fitting take?
In terms of what to expect, Grabowy said that fitting a player for a full set of clubs will take about two and a half hours and include "educating" a player about his or her needs. The fitting process also remains pretty much the same for woods, irons and wedges.Jan 12, 2015Club Fitting 101: Why you should get fit and what you need to knowhttps://www.golfpass.com › travel-advisor › articles › club...https://www.golfpass.com › travel-advisor › articles › club...Search for: How long should a club fitting take?
Why is it so hard to hit a golf drive?
Your nervousness is badly affecting how you’re swinging your driver. It typically makes your backswing short and fast which makes it hard to hit a good drive. If this is the case, you should try your best to turn your left shoulder behind your golf ball.
Why is my driver hitting so high?
If you have a clubhead speed of 100MPH or higher, you’re probably experiencing “ballooning” drives using shafts with regular amounts of flex and low compression golf balls. Your driver might be too lofted as well.
What happens if your golf swing is too flat?
If your swing is too flat, the clubhead will get to the golf ball from inside the target line which reduces its loft. To fix this, stand closer to the ball so that you swing more upright and create a steeper clubhead path by using your club’s full loft. Clubface that’s closed at the top.
What happens if you swing your driver at 90mph?
If you’re swinging your driver at 90MPH or lower, your golf ball won’t compress as much on the clubface and will launch at low trajectory with an insufficient amount of backspin to send it higher.
Why should your driver be above the top line of the clubface?
With your driver, about half your golf ball should be above the top line of the clubface to set up a level swing path as well as better launching conditions. Swing is too upright. Standing too close to your golf ball will force your backswing on a steep or upright plane. This means you’ll hit your driver too high.
How to get a good shot on the fairway?
Develop a reliable, “go-to” shot by teeing your golf ball lower. By teeing your golf ball down, the flight of your golf ball is lowered and it doesn’t spend as much time in the air which means it’s less likely to curve off the line. Your lower shot will wind up on the fairway without much fuss.
How to improve your golf ball?
Stop focusing on the hazards. You should be focusing on a target area that you choose on the fairway . Stop worrying so much about the hazards and pick an area on the fairway within your range. Just focusing on a target area that you choose will improve your chances of hitting your golf ball there.
What happens if your golf shaft is too light?
A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver since it is the longest club in your bag.
What does playing the right length driver shaft do?
Playing the right length Driver Shaft will increase your accuracy!
What is a tip stiff shaft?
Some shafts are ‘tip-stiff’, meaning the tip section near the clubhead is stiffer in relation to the rest of the shaft. Or ‘grip-stiff’ which keeps the upper end of the shaft firm to help reduce spin.
Why do you need torquing shafts for a high speed swing?
It is very helpful for your miss-hits and for when you make a bad swing. If you’re swinging badly at a high velocity then you need all the help you can get to keep the face as square to the ball as possible.
What is torque in golf?
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
How much does a driver shaft cost?
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
Why does my ball go high?
But it can also cause a hook or a slice. This is because the extra flex creates more spin on the ball.
What happens if a golf club is too short?
If a club is too short, too long, too light, too heavy, the lie angle is completely wrong, the club itself is the wrong design, or any of a number of factors are off , you could be setting yourself up for failure. The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
How to set yourself up to play golf?
In conclusion, here are the recommended steps to take in order to set yourself up to to play great golf and enjoy the game for years to come: 1. Get a basic club consultation from an expert. 2. Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs) 3.
What to look for in a beginner golf club?
For beginners, it’s likely the expert recommends more loft on your driver, lighter shafts with less flex, and more forgiving irons. For example, if you’re a beginning golfer who has blade irons with long, extra-stiff steel shafts, it’s likely they aren’t right for your game. So even if your swing greatly improves with the help of a top instructor, you’ll be fighting an uphill battle.
Why is it important to get fit for beginners?
“It’s very important that beginners get fit because we develop our swings around the gear we use without even realizing it ,” Briand says.
Which is better for beginners: blade irons or left irons?
The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
Do you need new equipment for Daniel Berger?
You don't need new equipment for it to be right for your game. Daniel Berger uses cavity-back irons from 2011!
Do you have to buy the latest golf clubs?
Now, it’s important to remember that you do not have to buy the latest and greatest equipment for it to be a good fit. You don’t have to spend $3,000 on shiny new clubs, and you actually don’t even have to buy a full set.
carn9698
Just get yourself an R9 10.5 with reg shaft. Problem solved. Sounds like you`ve got a smooth swing like me. 90 to 95mph max. Stiff is for 100mph only. end of story. why would any1 ever want to muscle the ball. its all tempo. building that tempo evry shot of evry round til ur a machine. you`ve got to know where its coming down.
p0gim0n
I had the same problem the whole summer. Before I was able to nail my driver a really good distance straight down the fairway. Then all of a sudden...a mental block. I can hit everything else BUT my driver. It forced to tee up just using my 3 wood. My misses was exactly like yours. It was sporatic. It went all over the place.
happyroman
I think part of your answer lies in the way you expressed your question. To paraphrase, you said you were trying to swing the driver with the same swing as your 4-iron and were getting poor results. As I am sure you are probably aware, the driver is meant to be swung differently than the other clubs.
What is the biggest mistake a golfer makes when purchasing new drivers?
One of the biggest mistakes golfers make when purchasing new drivers is assuming they all have similar performance. Based on our experience, we can tell you that there are significant differences in each club. Here are some of the main things we are looking to customize in a driver head for your swing:
What happens to the trajectory of a golf ball if you have two different drives with the same loft?
Center of Gravity: Even if you have two different drives with the same loft, the trajectory of the ball flight could change quite a bit based on where the center of gravity of the club is . You can read this article to find out more about that concept.
What is MOI in golf?
Moment of Inertia (MOI): This is a measurement of “forgiveness factor” in a driver head design. The higher the MOI, the more the clubhead will resist twisting on off-center strikes. However, this could alter the spin rate dramatically, so we are always trying to match the proper MOI of a driver head to the player’s swing tendencies.
What is the stock length of a golf driver?
Shaft Length: Today, a lot of drivers have a stock length of 45 1/2″ to 46″. At Pete’s Golf, we usually operate with a 45″ standard because we typically find the best combination of distance and consistency. That doesn’t mean we won’t go shorter or longer; it all depends on the player and their swing.
Can you fit a golfer into an adjustable head?
We won’t fit a golfer into an adjustable head if it’s not necessary. But if we do, we highly recommend not changing the settings on your own. Additionally, if you feel you’re having a problem with your settings, it’s always best to bring it to Pete’s Golf for us to double-check that everything is set correctly.
Is there a standard for shafts?
There are no standards: There are no standards in the golf industry for shaft specs. One company’s “stiff” might be another company’s “regular” flex. By working with reputable shaft manufacturers, and doing our own quality control, we make sure you are getting the right shaft specs based on the fitting.
How to swing a golf club with a trail hand?
Next, put your trail hand on the club. When you do this, your spine will naturally tilt back away from the target and put you in the correct position to make a solid swing.
Why is it important to nail down the fundamentals of a driver?
Because of this, it is extremely important to nail down the fundamentals of a driver so you can wield the big stick with confidence.
How to tee the ball in a stance?
You also want to tee the ball up in the forward portion of your stance, just inside the lead heel. This will allow you to catch the ball at the end of your swing arc when you are hitting up on the ball. To get this position, set up with your feet together even with the ball and then taker a wide step back with your trail foot. This will put you in a nice, wide base to make an athletic and powerful swing.
How to make a solid swing?
Spine tilt. Once you get in this position, grip the club in your lead hand. Your shoulders should be level and square at this point. Next, put your trail hand on the club . When you do this, your spine will naturally tilt back away from the target and put you in the correct position to make a solid swing. 4.
Where should the ball sit when teeing up?
You typically want about half the ball to sit above the face of the driver when you tee it up. This makes is easier for you to hit up on the ball and elevate the ball off the tee. 2. Stance. You also want to tee the ball up in the forward portion of your stance, just inside the lead heel.
Do you need to tee the ball up?
Before you even think about your swing, you need to tee the ball up. This might seem simple, but it is a key for hitting the driver consistently as you want to have the ball teed up at a uniform height every time.
Flex/Frequency
Length
- The length of your driver shaft will help you control the directionof the ball more. A shorter shaft will give you better accuracy. A longer shaft will give you more distancebut will cost you some fairways in regulation. You will sense a theme in this article that the name of the game is to find balance, and that includes length. There is a perfect length for you. A shorter driver will also affe…
Weight
- The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball. But it’s not as easy as just going out and getting a lighter shaft. A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver sinc…
Kickpoint
- Now we are getting into some in-depth driver talk. This is a word you may not hear too often amongst your weekend foursome pals. This refers to a spot or small range on the shaft where it experiences the most bend under duress or that of a golf swing. I’m sure you noticed that the grip end is thicker than the clubhead end. This tapering is different with each shaft and will affect ho…
Torque
- Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting. Not to sound like a broken record but generally, you want your torque to be not too high and not too low. Based on your swing speed, your club fitter can determine how mu…
Cost
- It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300. Yes, one shaft without a head or grip on it can cost $300+. Not many people want to drop that much cash on half of a driver. But that should be proof of how much science and technology goes into these so that we can all hit it a little furthe…
Conclusion
- Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water. It’s just easier to hire a trained professional and get it done right from the beginning. Getting fit for a driver shaft is a great learning experience and you will feel like a professional when you get to see all your numb…