
What is a hosel on a golf club?
The "hosel" is the place on a golf club where the shaft is connected to the clubhead. Typically, the hosel is part of the clubhead, and the shaft slides into the hosel and is secured with epoxy. Clubs are comprised of three basic parts: the clubhead, the shaft and the grip.
What is a putter Hosel design?
This design helps to create more torque on the clubhead and is typically favored by golfers who have a firm putting stroke. There are three main types of putter hosel designs: heel-toe, center-hosel, and offset. The main difference between the three is how they change the putter’s toe hang (the angle of the clubface in relation to the shaft).
What are the different types of hosels in TaylorMade golf clubs?
We'll highlight the four most common hosel types in the TaylorMade arsenal, along with various head types starting with the all-new Spider GT. Many golfers believe single bend hosels are only for players with a straight-back-straight-through putting motion, but that doesn't tell the whole story. It starts with the way you set up at address.
What happens when you heat the hosel of your golf clubs?
Speaking of heating the hosel: Exposing your golf clubs to certain high-heat environments can weaken the epoxy inside the hosel, causing the shaft to loosen over time. More Facts About the Humble Hosel The weight of the hosel is part of the overall weight of the clubhead, and weighting properties of golf clubs impact performance.
What is the hosel on a golf club?
What is an adjustable hosel?
What is a bore through hosel?
What is a plumber neck hosel?
Why does my golf club shaft loosen?
Does a lighter hosel affect the draw bias?
Can you replace golf clubs yourself?
See more
About this website

Hosel size chart - WRX Club Techs - GolfWRX
Someone at one time posted a chart here that listed the size shaft that most irons took. Would anyone still have that they could post? PS. Need sizes for Cleveland CG7's and Maxfli Revolutions. Thanks
How do I fix this gap between ferrule and hosel? - GolfWRX
I don't post often and hope this is the right forum. I just noticed this gap between ferrule and hosel on my 7 iron of AP1 710 (see attachment). This is the only gap in the set. Is this a problem? If so, how can I fix it? Thank you for helping out!
What is the hosel on a putter?
The sheer variety of putter specs — everything from head size, shape and weight to shaft length and grip size and style — can be daunting. But the first thing you may want to consider when shopping for a new flatstick is the hosel. Why? This humble hunk of metal is the only connection between the shaft and the clubhead, which means that it largely dictates the balance and release pattern of a given model.
What is a no bend shaft putter?
Putters with a no-bend shaft in the middle of the putterhead are typically (but not always) face-balanced and thus more useful for straight-back, straight-through strokes.
When you balance the shaft of a face-balanced putter on your finger, should the clubface point?
TIP: When you balance the shaft of a face-balanced putter on your finger, the clubface should point to the sky.
Where is the hosel on a golf club?
Located at the top of the clubhead, the hosel is the hollow section onto which the club shaft is inserted. It serves as the bonding point between the club shaft and the clubhead and is sometimes referred to as the neck, or the socket.
Why does my golf ball shank?
Although there are competing theories, it is believed that shanks are caused by balls hitting the hosel of the club, sending it way off target. As a result, a golfer will be smart to try and avoid placing his golf ball too close to the hosel, keeping the ball away and centered on the sweet spot instead.
What happens when the club heads separate?
When this occurs, it usually happens during a golf swing after the club strikes the ball and the ground. If this type of damage were to occur to several clubs in a set it may point to a manufacturing defect or a worse to a sign ...
Why is the hosel round?
The hosel, therefore, is round (to accommodate the round shaft). When a golfer hits a "hosel rocket," the impact of golf club and golf ball happens in the wrong place.
What is a hosel rocket?
Updated September 03, 2019. "Hosel rocket" is one of the more fun slang terms in golf. Alas, it is one of the least fun golf shots. That's because a hosel rocket is a shank . So that's what "hosel rocket" is: a slang term for a shank.
What happens if you hit a hosel rocket?
Basically, when you hit a hosel rocket, you've come close to missing the golf ball. The causes and possible cures of shanks are covered in our Mishits Tip Sheets and also in our more extensive definition of shank.
What is a shank in golf?
A shank is one of the worst mishits in golf. When a shank occurs, the golf ball flies off (most commonly) way to the right for a right-handed golfer. Sometimes even at extremely sharp angles to the right — 70-degrees or more.
Can a golf ball go anywhere?
But, really, the ball might go anywhere when a shot is shanked.
Is a hosel rocket a shank?
"Hosel rocket" is one of the more fun slang terms in golf. Alas, it is one of the least fun golf shots. That's because a hosel rocket is a shank .
What is the mantle of a golf ball made of?
Golf ball mantle is made from different materials within their respective layers. A strong, rigid thermoplastic is found on the outer layer of the mantle. Whereas a thermoplastic polymer would be found in the middle section and a rubber is used in the mantle’s inside layer which is much softer. Before plastics and other synthetic rubbers were used, ...
What are the different materials used in golf balls?
What Are The Different Golf Ball Materials? Golf balls are made from different materials from synthetic rubbers for the core to thermoplastic polymer for the mantle to Surlyn for the cover are used to construct a golf ball. All of these different components play a key role of the make up of a golf ball.
What Are The Different Golf Ball Materials?
Golf balls are made from different materials from synthetic rubbers for the core to thermoplastic polymer for the mantle to Surlyn for the cover are used to construct a golf ball. All of these different components play a key role of the make up of a golf ball.
What Is The Golf Ball Manufacturing Process?
The process for golf ball manufacturing include: washing, imprinting, coating, pressing and packaging the golf balls. Every step must be done in a specific order and there are many different machines involved in order to produce a golf ball from concept to completion.
How to wash golf balls?
Step 1: Washing. The first step, washing involves the use of a machine that washes the golf balls in order to prepare them for the imprinting process . The washing machine is a washer and dryer hybrid that uses high pressure to remove unwanted material, such as oil, from the ball surface.
What are the main components of a golf ball?
A golf ball comprises of three main elements. The cover, the mantle and the solid rubber core. These three areas combine to allow golf balls to offer spin rate, compression and initial velocity.
Why are golf balls elasticity?
By having elasticity the golf ball is able to quickly reverse to its natural state after the club has had impact with the golf ball.
What is a long hosel putter?
Long Hosel. These designs are usually elongated plumber-necks and are used to create face-balancing. Although they look very similar to the standard plumber-neck design, the extra length definitely creates a different feel, which you should take into consideration before selecting a putter with this type of hosel structure.
What is a plumber neck putter?
These hosels often are plumber-necks that bend back from the shaft line. Usually, this type of putter is used to create a more substantial amount of offset, which promotes more of an upward strike into the golf ball.
What is face balanced putter?
Face-balanced putters often have no hosel, but instead an S-bend shaft that goes directly into the putterhead. These putters are designed specifically for golfers who want to take the club straight back and straight through in a piston-like motion.
What is a flare tip putter?
Flare-Tip. The flare-tip is typically a “shaft-over” hosel, meaning the shaft covers the top of the hosel where the two connect. Putters with flare-tip hosels generally have less offset and are more blade-like in their design.
What is the hosel on a golf club?
The hosel is the part of the clubhead into which the shaft is fit and secured. Cleveland Golf
What is an adjustable hosel?
Adjustable hosels include a sleeve that the golfer can turn and click into different settings. Doing so allows the golfer to change certain features of the golf club, such as (most commonly) face angle, loft and/or lie angle . If you buy a golf club or clubs with adjustable hosels, obviously you need to know what the hosel is and read ...
What is a bore through hosel?
A "bore-through hosel" (or bore-thru) is a hosel in the clubhead that allows the shaft to go all the way through the head. With a bore-through hosel, the end of the shaft can usually be seen on the sole of the club. Bore-through hosels are uncommon, but Callaway Golf has used them.
What is a plumber neck hosel?
A "plumber's neck hosel" is specific to certain putters and is a hosel with a horizontal bend in it that creates offset. The point is to help the golfer keep her hands in front of the clubface through impact.
Why does my golf club shaft loosen?
Speaking of heating the hosel: Exposing your golf clubs to certain high-heat environments can weaken the epoxy inside the hosel, causing the shaft to loosen over time.
Does a lighter hosel affect the draw bias?
Making the hosel heavier or lighter can have small effects on the center of gravity position of the clubhead, and small effects on a club's draw bias or fade bias . Manufacturers consider these issues when designing the overall weighting properties of clubheads.
Can you replace golf clubs yourself?
Also, if you are a do-it-yourselfer and want to try replacing the shafts in your clubs yourself, you'll be dealing with the hosel in doing so. This involves heating the hosel to loosen the epoxy, which allows removal of the old shaft, as a first step.
