Golf-FAQ.com

golf how to calculate correct lie angle

by Dr. Vicente Schamberger Published 2 years ago Updated 1 year ago
image

The old-school way of measuring lie angle uses a couple of commonly used golf tools: an impact board and some tape. Tape up the sole of your golf club and hit a few shots off the impact board. By looking at both the tape and the impact board, you can tell what general type of lie angle you need.

Part of a video titled HOW TO CHECK LIE ANGLES ANYWHERE - YouTube
7:02
11:13
Especially if you have say a darker finished head uh and this may be the case with any darker finishMoreEspecially if you have say a darker finished head uh and this may be the case with any darker finish head even if you're using real golf balls. It may be difficult to see the line.

Full Answer

How do you measure lie angle on a golf club?

Picture the club properly soled on flat ground, with a straight line extending back from the heel of the club along the ground. Now imagine measuring the angle from that line up to the shaft. That's the lie angle.

Are your golf clubs' lie angle too flat?

If so, your golf clubs’ lie angles may indeed be too flat. On the other hand, if you are playing with golf clubs with too much of an upright lie angle, the toe of your club will not even touch the ground at impact. The club toe will often be pointed slightly up at impact, and the heel may hit off the ground.

How do you know if your lie angle and swing are right?

If the line is straight up and down in the middle of the club face, then your lie angle and swing are right on target. If the line is near the middle of the face but the line is slanted toward the heel, then your lie angle is too flat and the toe is down at impact.

What is the difference between lie angle and loft in golf?

Loft, on the other hand, is a trajectory control. The loft will also determine how far your golf ball will travel. The lie angle is measured between the center of the shaft and the ground when the sole of the clubhead is touching the ground or is flat on the ground.

image

How do you determine the lie angle of a golf club?

Draw a straight line on the back of the golf ball, and have it facing the clubhead. After you make impact the line will appear on the face. If it's pointing towards the toe, then your club is too upright. If it's pointing towards the heel, then it's too flat.

How much should I adjust my lie angle?

Standard lie angles on most irons will be approximate. To determine if lie angle adjustments are necessary for your irons, refer to the chart below to determine your wrist to floor measurement....Determining and Selecting Your Lie Angle.IronsStandard Lie Angle156.0 deg257.0 deg358.0 deg459.0 deg7 more rows

Does 1 degree lie angle make difference?

Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.

How do you measure the lie angle of an iron?

1:3520:37Unexpected Golf Lie Angle Test For Irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo my favorite way is to use a golf ball that's got a line right through the middle of it we maybeMoreSo my favorite way is to use a golf ball that's got a line right through the middle of it we maybe can draw a sharpie line on the middle of it.

What happens if my lie angle is too upright?

If your lie angle is too upright, typically meaning that it's closer to 90 degrees than 0 degrees, then that means you will typically hit the ground with your club with the heel side of the sole.

What lie angle do pros use?

If you're looking at the lie angle on each club in a set, Sieckmann noted that an elite player might be 1-degree upright in his irons but get gradually flatter when transitioning to the wedges, going to potentially a standard lie angle in the sand wedge and maybe even 1-degree flat in the lob wedge.

Does upright lie promote a draw?

The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.

Do shorter golfers need flatter clubs?

Generally, shorter golfers will need a flatter lie angle, whereas taller players will need a more upright lie angle. If you hit a lot of shots toward the toe of your club and your ball tends to fade to the right, you probably have a lie angle that is too flat for you.

What happens if your irons are too upright?

But if your clubs are too upright, the toe would be off the ground, and you'd have a tendency to pull the ball (inset, top). Too flat, and the heel would be up, and you'd tend to hit pushes (inset, bottom). Starting with the face slightly off can produce exponential misses, so make sure your clubs fit.

Does 2 degrees upright make a difference?

What Does 2 Degrees Upright Mean On A Golf Club? If a club is 2 degrees upright that can mean a couple of different things depending on the context. Most likely, it means that a club is 2 degrees more upright than the standard lie angle for that brand and model.

What is the standard lie angle for golf irons?

The standard lie angle of drivers and woods is in the range between 56 and 60 degrees, hybrid / rescue clubs between 58 and 62 degrees, irons between 61 and 64 degrees. For wedges it is nearly always 63 or 64 degrees.

Do tall golfers need upright lie angle?

Tall golfers need a more upright lie angle and a bit of extra length on the shafts. If you play with clubs that are too flat then you can expect to be hitting a lot of shots left during your round.

How do you know if a lie angle is correct?

4:4511:13HOW TO CHECK LIE ANGLES ANYWHERE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd see where that line is pointing if it starts to lean a little bit like this what that basicallyMoreAnd see where that line is pointing if it starts to lean a little bit like this what that basically means is the club came into the ball to upright and we need to flatten it. Out.

Does 2 degrees upright make a difference?

What Does 2 Degrees Upright Mean On A Golf Club? If a club is 2 degrees upright that can mean a couple of different things depending on the context. Most likely, it means that a club is 2 degrees more upright than the standard lie angle for that brand and model.

Should I adjust my lie angle?

Simply put, having the correct lie angle can make you a more accurate golfer. For every degree your clubs are off in lie angle, it can cause your shots to travel four yards off your intended target line.

Does upright lie promote a draw?

The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.

How to measure the lie angle of a golf driver?

The easiest way to measure the lie angle is by using an industrial golf club specification gauge. These are available from manufacturers. You can also use the triangle method to calculate the lie angle of the driver by making it lean against a wall and thus forming a triangle.

What is the standard lie angle of a golf club?

The standard lie angle of a driver can range anywhere between 50 to 60 degrees. If you are wondering what the terminologies in regards to lie angle are, I’ll explain them to you now.. If you find a golf club with a standard lie angle, it means that you have picked up an off-the-shelf golf club.

How does driver lie angle affect ball flight?

This is because it affects the direction of the ball during a shot. If the lie angle is too flat, the ball will move towards your right side. This is in the case of a right-handed player.

What is the driver lie angle?

Driver lie angle is the measurement between the shaft and the center of sole on a driver. The driver lie angle will either be in the standard, flat or upright position; with each position affecting how the driver interacts with the ball. The driver lie angle can make a whole lot of difference in a game.

What does it mean when a golf club has a flat lie angle?

The lie angle is not adjusted to suit your playing style. A club with a flat lie angle means that its angle is lower than that of the standard club. A club with an upright lie angle has a higher angle than that of the standard club.

Why is my golf club lying?

The simple reason is that the lie angle in your club is incorrect for you. You will slice the ball more often if your lie angle is too flat. On the other hand, if the lie angle is too upright then you will tend to hook the ball more.

What is loft in golf?

Loft, on the other hand, is a trajectory control. The loft will also determine how far your golf ball will travel. The lie angle is measured between the center of the shaft and the ground when the sole of the clubhead is touching the ground or is flat on the ground.

What is a standard lie angle?

Standard Lie Angle. A standard lie angle is when the sole rests flat on the ground. If you have ever bought a set of golf clubs straight off the rack (without being fitted), you probably purchased standard lie angle clubs because these are the most commonly sold in golf stores.

How to tell what angle you need for a golf ball?

Another decent way to tell what type of lie angle you need is simply using a magic marker. Take the marker and draw a straight line on the back of the golf ball. Make sure that line faces the center of your club and hits the ball. Look down at your clubface and study where the ink is on it.

What happens if the ink is angled toward the heel of the clubface?

If the ink is angled toward the toe of your clubface, the club you are using has too much of an upright lie angle. Conversely, if the ink points toward the heel of the clubface, the lie angle is too flat for your swing.

What is an upright lie angle?

An upright lie angle is when the toe of the club is up off the ground. Though it depends more on the golfer’s individual swing, their overall height plays a role. As a general rule of thumb, taller golfers usually need a tad bit more of an upright lie in their irons.

Why does my club toe not touch the ground?

On the other hand, if you are playing with golf clubs with too much of an upright lie angle , the toe of your club will not even touch the ground at impact. The club toe will often be pointed slightly up at impact, and the heel may hit off the ground. This will lead to lots of mishits like hooks and pulls (and lots of time looking for your ball in the woods) because the clubface becomes too shut at impact.

How to tell if your golf club is too flat?

You may also notice that the heel of your golf club will never touch the ground if the lie angle is too flat .

Why is it important to have clubs with the right lie angle?

However, if your equipment is always working against you, you will constantly be fighting your golf swing on the course. This is no fun and leads to lots of frustration during your rounds.

What is the lie angle of a golf club?

The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...

What is lie angle?

Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session.

What does it mean when your divots are deeper on the toe side than the heel side?

If your divots are deeper on the toe side than the heel side (toe down, heel up at impact) or deeper on the heel side than the toe side (toe up, heel down at impact), that's a sign your lie angles might be too flat or too upright.

What is the lie angle on a 9 iron?

Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".

Why is a proper lie angle important?

Proper Lie Angle Is More Important in Irons Than in Woods. Don't misunderstand: Lie angle is an important factor in all golf clubs, even the putter. But having improperly fit lie angles causes more problems in irons than in the woods.

What happens if the lie angle of your golf clubs is ill-suited to you?

When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.

What is the range of lie angles?

Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)

What is lie angle?

WHAT IS IT? Lie angle is the angle created between the center of the shaft and ground when you put your iron down in the address position. If you have the proper lie angle, the center of the sole will rest squarely on the ground when you put the club down behind the ball.

How does lie angle work?

HOW IT WORKS. Simply put, having the correct lie angle can make you a more accurate golfer. For every degree your clubs are off in lie angle, it can cause your shots to travel four yards off your intended target line. If you are not making square contact with the ground, it can throw off your clubface in relation to the target, ...

What does it mean when your line is slanted toward the toe?

If the line is near the middle of the face but slanted toward the toe, then your lie angle is too upright and the toe is up at impact. This is an easy way to check your lie angle at home. Most clubs can be adjusted by a pro shop to match what you need.

What does it mean when your golf line is straight up and down?

If the line is straight up and down in the middle of the club face, then your lie angle and swing are right on target. If the line is near the middle of the face but the line is slanted toward the heel, then your lie angle is too flat and the toe is down at impact.

Can you use the PING color code on golf clubs?

You can also use the PING Color Code chart to match your height and wrist-to-floor measurement, but because there is no standard lie angle across all club makers, it may not always translate to every iron. There is one easy test you can do at home and all you need is a marker, some golf balls, and your irons.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9