Is the Bushnell tour V3 the best rangefinder for 2013?
Compared to the other lasers offered by Bushnell, and the other lasers in the market with similar features, this price point is excellent. It’s not inexpensive, but it is definitely competitive. Shave off another $25-$50 and the Tour V3 could likely be the dominant rangefinder in the 2013 market.
How do I Reset my Bushnell Golf GPS device?
A: To reset a Bushnell Golf GPS Watch, press and hold all four corner buttons for approximately 7 seconds, or until the screen powers off. Release the buttons, and the watch will reboot. To reset a Bushnell Golf hand-held GPS device, such as the Phantom or Hybrid, press and hold the down button and then press the power button once.
What is the warranty on a Bushnell golf device?
A: All Bushnell Golf devices come with a free limited warranty (2 years for GPS units and 1 year for laser rangefinders) that guarantees our products to be free of defects in materials and workmanship.
How do I connect my wingman to the Bushnell golf app?
For Android, it would be under settings, Bushnell App, App Permissions, Location = On. Once you check both of these settings, also make sure your Wingman shows "Connected 2 of 2" when it is selected in the Golf App. If it does not, re-pair your Wingman remote using the Pair Device button inside the App.
How do I change my Bushnell from meters?
To select between yards and meters, look through the monocular, depress the "mode" button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.
How do you reset a Bushnell from meters to yards?
While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.
How do I change my golf rangefinder from meters to yards?
To select between yards and meters, press and hold the POWER/FIRE button. The display will begin to cycle through the setup options: Yards w/JOLT, Yards, Meters w/JOLT, Meters (for details on the JOLT feature, see “About JOLT”).
How do you get the Bushnell Tour V3 off meters?
To save you the frustration, here is how you do it.Turn off your Tour V3.When you turn it on again, but this time hold the button down for at least 5 seconds.The readings should start interchanging between yards and meters. when it shows meter readings, hit the button again to confirm the switch.
How do I change my Bushnell from meters to feet?
SELECTING UNIT OR MEASURE (YARDS/METERS/FEET) To select a different unit of measure, start with the rangefinder powered off. Press and continue to hold the Fire button. “Y”, “M” or “FEEt” will begin flashing, with the display slowly cycling through these 3 unit options (5,7b).
How do I change my tour V4 from meters to yards?
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters. When the units you want to use are displayed, release the POWER/FIRE button to select it.
How do you change from meters to yards?
Multiply the number of meters by 1.0936 to get the number of yards. There are 1.0936 yards in every meter. So if 1 meter is 1.0963 yards, then 2 meters is 2.1872 yards, and so on.
How do I reset my Bushnell rangefinder?
- Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen. - The device is relatively sensitive to being "properly ejected" after being plugged into a computer.
How do I adjust my Bushnell Tour V4?
ADJUSTING THE EYEPIECE Your TOUR V4 is constructed with an adjustable eyepiece (+/- 3 Diopter Adjustment) that allows one to focus the LCD display relative to the image. Simply rotate the eyepiece until the reticle and object distanced to are both in focus to your eye.
How do I change my Bushnell Tour v2 from meters to yards?
To select between yards and meters, quickly press and release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and hold it down for approximately 5 seconds.
How do I change my Bushnell Tour V3 rangefinder from meters to yards?
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters. When the units you want to use are displayed, release the POWER/FIRE button to select it.
How do you use a Bushnell Tour V3 rangefinder?
0:082:23Bushnell Tour V3 golf laser range finder review - YouTubeYouTubeStart of suggested clipEnd of suggested clipA vibration mechanism which means that you can scan the horizon. Looking for your target. And asMoreA vibration mechanism which means that you can scan the horizon. Looking for your target. And as soon as it hits that target as soon as it locks on it gives it a little buzz.
How long is Bushnell Golf warranty?
A: All Bushnell Golf devices come with a free limited warranty (2 years for GPS units and 1 year for laser rangefinders) that guarantees our products to be free of defects in materials and workmanship.
Where is the LRF on a Pro XE?
The unit measure indicators are located in the lower right portion of the LCD. To select between yards and meters on your... Pro XE: To select between yards and meters, press and hold the Mode button which is next to the Power button.
Can you play music on a Bushnell golf club without Bluetooth?
A: For music play only, the Wingman can remember up to 8 different bluetooth devices (at different times) without using the Bushnell Golf App. The easiest way to pair the Wingman with your bluetooth device to play music only is to have all nearby phones' Bluetooth turned off and not physically near the Wingman when connecting.
Is Bushnell Golf compatible with Apple?
A: Android and Apple iOS compatible versions of our new Bushnell Golf Mobile app can be downloaded at the Google Play and Apple App stores. This app is compatible with our latest Laser Rangefinders (except Hybrid) as well as the Phantom 2 and Wingman GPS devices.
A Screen Door on a Submarine?
There is nothing better than a classic burn, “You are about as useful as a screen door on a submarine.” Burn! To help those of you out there who don’t get it, a screen door would not be a useful addition to a submarine. You see, submarines go under water, and a screen door would let that water inside of the boat.
Ease of Use
Quick and accurate. Press a button to turn it on, press it again to measure. I realize that all lasers work the same way these days, and that seemingly all of them could be classified as easy to use . Some company will break this paradigm eventually though.
On the Course
OK, let’s take a look at the Tour V3‘s performance. Is it really one better than the Tour V2? Here are some of the specific details:
JOLT Technology
The Bushnell Tour V3’s JOLT Technology was something that really caught my eye when I first read about it. The Tour V3 vibrates just a bit when you lock onto target. Just a bit of bzzzzt. To me, this was the potential screen door.
Concerns with the Tour V3
The JOLT Technology is also the source my only bit of trepidation with the Tour V3 . It is totally possible to get a quick, accurate reading without the JOLT Technology triggering and buzzing your mitt. My concern is that people could end up taking longer to read targets as they wait for the JOLT to fire.
Value
The non-slope Bushnell Tour V3 comes in at just under $300, with the slope version adding about another hundred. You can also add a bit of value and social consciousness to your purchase by going with the Patriot Pack .
Summary
The Bushnell Tour V3 laser rangefinder is the unit to beat in 2013. The redesigned case is excellent, and the JOLT Technology adds a new layer to Bushnell’s already excellent PinSeeker technology.
