The Universal Shaft extensions will work with almost any steel or graphite
Graphite
Graphite, archaically referred to as plumbago, is a crystalline form of the element carbon with its atoms arranged in a hexagonal structure. It occurs naturally in this form and is the most stable form of carbon under standard conditions. Under high pressures and temperatures it converts to diamo…
Full Answer
How do you shorten a golf club shaft?
To do that, the DIY golfer will have to:
- Remove the existing grip.
- With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
- Re-install a grip on the newly shortened shaft.
- And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...
How do you replace a golf club shaft?
How To Re-Shaft Your Steel Golf Clubs
- Carefully clamp the shaft into a vise using a Shaft Vise Clamp. ...
- When removing steel shafts from clubheads, use a torch to heat the hosel. ...
- After 30 seconds of heating, with your gloved hands grasp the head and twist/pull the head. ...
- Using a wire brush remove excess epoxy from the inside of the hosel.
How to install a shaft in a golf club?
How to Install a Shaft in a Golf Club
- Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club.
- Cut the shaft to the proper length, depending on what club you are modifying. There are websites that can help you determine the length.
- Roughen the tip of your new shaft before inserting it into the hosel of the club head. ...
How to reshaft a golf club?
Update Your Golf Club With a New Shaft
- Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. ...
- Measure the shaft tip. ...
- After the tip has been trimmed, abrade or roughen the shaft tip. ...
- Align the shaft graphics the way you want them by rotating the shaft. ...
- Position the club in the normal playing position. ...
Can you extend a golf club that has been extended?
Can you extend a 0.600 shaft?
Is 11 a better shaft extension than 2?
How do I extend my golf shaft length?
7:4111:02How to ADD Extensions To Golf Clubs - Start to Finish! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm gonna take my ruler. And a pen. And I'm gonna measure out one inch. We're gonna grab our pipeMoreSo I'm gonna take my ruler. And a pen. And I'm gonna measure out one inch. We're gonna grab our pipe cutter put it right there on the mark. Tighten. It down.
How do you use a golf shaft extension?
0:349:12Club Repair Training - Shaft Extensions - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is a double extension. So there's an extension that either end. This could be cut in half andMoreIt is a double extension. So there's an extension that either end. This could be cut in half and used to extend the golf club. We find the size to make sure it properly fits inside the golf shaft.
Can you add length to a golf club shaft?
Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts. You may add extenders to your existing shafts or you may replace your existing shafts with longer ones.
Can you put an extension on a graphite golf shaft?
0:562:35How To Install Graphite Shaft Extenders - YouTubeYouTubeStart of suggested clipEnd of suggested clipAvailable once we have the appropriate size extender the next portion is to sand the stem. That'sMoreAvailable once we have the appropriate size extender the next portion is to sand the stem. That's going to go inside the butt end this will allow for a better epoxy bond we could either do this by
Can you put an extension on a driver shaft?
We recommend using a steel extender to extend a steel shaft. Using other materials may lead to premature breakage. Wooden dowels can also be used to extend steel shafts, but these require much more work (in our opinion) than using steel extenders.
What if my golf clubs are too short?
What Happens When Golf Clubs Are Too Short? For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.
How much does it cost to extend your golf clubs?
Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft. *Save grip Fee may apply.
How do you add 1/2 on a golf club?
5:529:01Extending Golf Shafts 1/2 Inch | How to at home! | Simple - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then simply take your golf club and the extension. And insert one into the other. And twist itMoreAnd then simply take your golf club and the extension. And insert one into the other. And twist it down until you have no gift between the shaft and the extension itself and that will then rest.
Do pro golfers use longer shafts?
Pagel explained that the model local rule, MLR G-10, not only wouldn't affect recreational golfers, as it applies to only the game's highest levels, but it would have minimal impact on the pros; Pagel cited data that determined that just 3% of professional golfers use or have used driver shafts longer than 46 inches ( ...
What size shaft extender do I need?
First you'll need to measure the INSIDE diameter (ID) of the butt end of the shaft (not the outside). This will determine the size extension you need. Due to slight variations in shaft diameters, you will likely need to apply light sanding to the shaft extension to achieve a suitable fit.
Can you extend a golf club that has been extended?
The same goes for any commercially available steel shaft extensions. Never extend a golf club that already has been extended previously.
Can you extend a 0.600 shaft?
Extending a steel shaft is pretty straight forward. That is if you have a 0. 600” shaft then you order a 0.600” steel golf shaft extender and install it. However, extending graphite golf shafts it is not so cut and dry.
Is 11 a better shaft extension than 2?
Eleven is far better than two In the past, graphite shaft extensions have come in two different sizes; standard and oversize. These two were to fit all the different models in the industry by either sanding until it fit the inside of the butt or wrapping masking tape around the stem or insertion end to act as a shim.
Step 1
Place the hooked blade under the lip of the grip and cut vertically through the grip, being careful not to scratch the shaft. Grasp the grip at the bottom and pull it off.
Step 2
Peel the grip tape off the shaft by hand. Loosen any remaining tape by heating it with a blow-dryer or a heat gun and then peeling it off.
Step 5
Slide the extender into the hole and rotate it as you push the extender into the shaft to spread the epoxy.
Step 7
Place the shaft in a rubber shaft clamp and secure the clamp in a vise.
How does lengthening a shaft affect swing?
Timing and Feel. In many ways, the biggest effect of lengthening a club shaft is how it affects your ability to swing the club. The combined changes in length and swing weight make the club feel different. In turn, these changes will affect your timing and even your mechanics, perhaps without you even realizing it.
Do golf clubs have longer shafts?
Effects of Lengthening a Golf Club Shaft. Tall players like Bubba Watson have to use longer shafts in all of their clubs. Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts.
Can you add extenders to your golf shaft?
You may add extenders to your existing shafts or you may replace your existing shafts with longer ones. The effects can be very different. Tom Wishon has written extensively about the effects of changing shafts in "The Golfsmith Practical Clubfitting Program" guide.
Does lengthening the shaft make the club head heavier?
Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.
Does lengthening a golf club shaft affect accuracy?
Accuracy. As a general rule, lengthening any club's shaft will reduce your accuracy with that club. The longer the club, the more difficult it becomes to hit the ball solidly. This is especially true when the ball is on the ground rather than on a tee, since hitting the ball fat is more likely.
Is shaft length a factor?
Shaft length is certainly a factor in how far you hit a given club. However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.
Can you use extenders to lengthen a golf club?
However, using extenders to lengthen a club will change the flex of the club, sometimes by an unpredictable amount. Not only does the shaft become more flexible than before, thus further affecting accuracy, but it lowers the kick (or bend) ...
Mike C said
If done properly, you won't even know there is an extension, but it will decrease the swing weight of the club (i.e., the head will "feel' lighter). This isn't huge as the weight of the plug will be offset a little by the increased length of the shaft.
James T said
If done properly, you won't even know there is an extension, but it will decrease the swing weight of the club (i.e., the head will "feel' lighter). This isn't huge as the weight of the plug will be offset a little by the increased length of the shaft.
Can you extend a golf club that has been extended?
The same goes for any commercially available steel shaft extensions. Never extend a golf club that already has been extended previously.
Can you extend a 0.600 shaft?
Extending a steel shaft is pretty straight forward. That is if you have a 0. 600” shaft then you order a 0.600” steel golf shaft extender and install it. However, extending graphite golf shafts it is not so cut and dry.
Is 11 a better shaft extension than 2?
Eleven is far better than two In the past, graphite shaft extensions have come in two different sizes; standard and oversize. These two were to fit all the different models in the industry by either sanding until it fit the inside of the butt or wrapping masking tape around the stem or insertion end to act as a shim.
