To measure the tip flex, the tip end is clamped, and the load is applied to the butt end of the shaft. The more a shaft bends in this configuration, the softer the tip. A softer tip increases the launch angle and spin rate produced by the driver.
Full Answer
What is golf shaft launch and spin?
Understanding golf shaft launch and spin is the key to choosing the correct shaft for your swing dynamics. Shafts are typically identified by launch or trajectory characteristics in five categories: Low, Low-Mid, Mid, Mid-High and High. The same categories apply to the spin characteristics.
How do I choose the right shaft for my swing?
With the proper shaft weight, flex, length, swing weight and trajectory and spin characteristics, you will maximize distance AND accuracy for your swing. Understanding golf shaft launch and spin is the key to choosing the correct shaft for your swing dynamics.
What should I look for when buying a golf shaft?
A simple rule of thumb to remember when buying a shaft is a high kick point rating means low ball trajectory. Low kick point means higher ball flight trajectory. It also may feel like the club is “whipping” during the swing while a high kick point will feel more solid and stiff. Should I Buy Steel, Graphite, or Which Type of Shaft Material?
Does shaft weight affect spin on a golf ball?
Weight The weight of a shaft has a similar correlation to performance as flex. The heavier a shaft is, the more likely it is that your golf ball will fly low and with less spin. If it’s lighter, the ball will tend to fly higher and spin more.
Do I need a low launch shaft?
12:0615:00High Launch Shaft VS Low Launch Shaft - How Much Difference Is ...YouTubeStart of suggested clipEnd of suggested clipAnd maybe more than what possibly the shaft would do so it really depends on your strike pan if you'MoreAnd maybe more than what possibly the shaft would do so it really depends on your strike pan if you've got a very consistent strike pattern if that's in the middle.
How do I know what shaft flex is right for me?
Some General Guidelines About Shaft FlexTake a look at the distance you hit your driver. ... If you have a very smooth swing, you might benefit from a softer flex even if you swing fast. ... If your drives go left, you might benefit from a stiffer flex; if your drives go right, you might benefit from a softer flex.
Will a stiffer shaft reduce spin?
So the stiffer the shaft and/or more tip stiff the shaft in relation to your clubhead speed and point of release, the less the shaft bends forward at impact and the more that shaft becomes a lower launch and lower spin shaft.
Do I need a high launch driver?
Unless you're a better player with impressive speed, there's a good chance you could benefit from a driver with high launch characteristics. The slower you swing, the higher you need to launch it to squeeze out every carry yard from your driver.
What happens if your golf shaft is too flexible?
Having a shaft that is too flexible can also cause the ball to hook uncontrollably, because the shaft bends incorrectly, it will come through with a closed clubface causing the ball to go left, this is because the shaft can't handle your swing speed, and the head is rotating too much.
What happens if shaft is too stiff?
There are a few tell tale signs that your shafts are too stiff, firstly you will lose the ball to the right, because the shaft is to stiff it will be hard to square up at impact, causing the face to be open when you hit the ball, this is going to produce a fade or slice shot, generally ending up on the right side of ...
How do I know if my golf shaft is too light?
A shaft that's too heavy will cause a “labored golf swing.” A shaft that's too light will hurt your ability to make solid contact. When you find the right shaft weight, you'll experience a “high energy swing” with uniform contact.
Do low spin drivers go further?
“The majority of players that create more spin tend to hit the ball more accurately. So, if your goal is to hit straighter shots, then a higher spin driver is usually the way to go. On the other hand, if you want more distance, choosing a low-spin driver with an optimized launch angle will help you hit it further.
Does shaft flex affect launch angle?
The Flex is basically the static flex of the shaft. In general, every 10-point increase in Trajectory Effect will increase the launch angle by 1/3 of a degree and the spin rate by 100 rpm with a driver.
What is the best launch angle and spin rate for a driver?
When hitting a driver, what is the optimal launch angle? Well, manufacturers and tour technicians around the world will give us a guide and say around 15 degrees of launch with around 2,500-3,000 rpm of spin will generate the most efficient launch conditions.
What is the best launch angle for driver?
The ideal launch angle for a driver is between 15° and 17°. This is NOT the same as loft. Launch is defined as the angle between the ground and the ball flight just after impact, and is the result of the clubs loft and attack angle.
What spin rate do you want on a driver?
Understanding Spin Rate Numbers When the average PGA Tour player hits a driver, their spin rate is typically in the area of 2,700 RPMs. For a player who is a scratch handicap, their average is right around 2,900 RPMs. If you are a 10-handicap, you are probably around 3,200 RPMs.
What flex shaft should I use on my irons?
Determine the Proper Shaft Flex for Your SwingIf You Can Hit 150 Yards with a...Then Your Optimal Shaft Flex Is...6- or 7-IronRegular Flex (R)5-Iron/Hybrid or 4-Iron/Hybrid(Male or Female)Senior Flex (A/M)Any Iron/Hybrid lower than 4 or any Fairway Wood (Females or Juniors)Ladies Flex (L)1 more row•Apr 6, 2022
How do I know if I need stiff or regular flex irons?
If you have a slower swing speed, you are probably going to want to choose regular shafted clubs because the additional flex will provide a little more power and accuracy. When you swing harder, the stiff flex will be more controlled and give you the punch you need to hit better shots.
What swing speed requires a stiff shaft?
Stiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex.
What does a 5.5 shaft flex mean?
StiffStiff – 5.5. Stiff Plus – 6.0. Extra Stiff Flex – 6.5. Extra Stiff Plus – 7.0.
How to choose a shaft for a golf club?
Understanding golf shaft launch and spin is the key to choosing the correct shaft for your swing dynamics. Shafts are typically identified by launch or trajectory characteristics in five categories: Low, Low-Mid, Mid, Mid-High and High. The same categories apply to the spin characteristics. If you look at the chart above of shafts available for Titleist drivers in 2015, you can see a pretty linear slope from Low Launch and Spin to High Launch and Spin. There will be a few variations but the simple physics of designing a golf shaft makes it almost impossible to create a shaft that is Low Launch-High Spin or High Launch-Low Spin. Titleist has done a good job of showing the relative Trajectory (Launch) and Spin of shafts they offer for their clubs. Our Fitting Wizard gives recommendations for over 600 shafts. And, you can filter by brand, weight, price, trajectory and spin to see what is available. See Titleist Shaft Performance Guide Here…
How many degrees does a low trajectory shaft launch?
In a typical driver fitting, for example, a Low trajectory shaft may produce a 9 degree launch while a Mid-High trajectory shaft may only increase the launch to 11 degrees, and spin may only increase from 2,500 to 2,900.
What is a BGF shaft?
The BGF Fitting System has a one-to-one relationship between Trajectory and Spin. This means that a shaft that has a Low Trajectory designation will also have a Low Spin designation. And a shaft that is Mid-High Trajectory will also have Mid-High Spin. So when selecting shafts in a fitting, our fitters choose a shaft category based upon the BGF Fitting Recommendations in the appropriate category.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
How much does a graphite shaft weigh?
Graphite shafts are also much lighter weight (50-85 grams) while steel shafts can start at 120 grams in most cases.
How big is a golf shaft?
Most current shafts are approx,58 inches/14,7 mm in diameter near the grip, and taper down to 0,355 or 0,370 in diameter at the tip.
Why is shaft length important in golf?
An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.
How many layers of fiber are in a graphite shaft?
Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance.
What weight shafts are available for clubfitters?
Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.
What is the most important aspect of selecting a shaft?
The most important aspect of selecting a shaft is to know what your swing speed is.
When did steel shafts become legal?
Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.
What wood is used in a shaft?
The original shafts date back to the 18th century and were made from any hardwood available. Ironheart, bloomahoo, bullet wood, and ash and lancewood were some of the choices.
How Can You Measure Your Swing Speed To See What Shaft You Should Use?
These are called launch monitors , they track your swing speed, loads of other parameters.
How to determine shaft flex?
Your shaft flex will be determined mainly by your swing speed, and then by your ability, age and personal preference. Within each shaft flex there are different weights and kick points (bend points).
What Happens If Your Shaft Flex Is Too Flexible?
If the shaft is too flexible, you will have a ‘whippy’ feeling in your hands, and you won’t be able to feel the clubhead on the downswing.
What Happens If Your Shaft Isn’t Stiff Enough?
When the shaft is too stiff, it’s going to feel hard to swing, it’s going to feel heavy, and make you tired after a few swings.
When To Move To A Stiffer Shaft?
You should move to a stiff shaft once your swing speed moves into the next bracket, if you can’t track your swing speed here are some signs you need to go stiffer
What is shaft flex?
Shaft flex is how much the shaft bends throughout the swing, someone that swings it slow will need a more flexible shaft, while someone that swings it fast will need a stiffer shaft. You get Ladies, Senior, Regular, Stiff and X-Stiff shafts in Woods and Irons, generally your Woods and Irons will be the same flex.
Why is my golf club slice?
Try a more flexible shaft, when a shaft is too stiff the clubface struggles to turn back to square, which will present the clubface open at impact, causing the ball to slice. The more flexible the shaft is the easier it is to turn the clubhead over at impact.
Why do golfers buy shafts?
The problem is that buying a shaft because someone else uses it is like buying a size 44-long jacket because that’s what Tiger wears. It can be counterproductive to your game to purchase a shaft that isn’t right for you.
What shafts do you need for a slow swing?
Slow swing speeds will generally require softer-flex shafts, while high swing speeds need stiffer shafts; due to variations in swing patterns, however, swing speed is only one portion of finding the right shaft. Briand’s recommendation is to use your current driver shaft as a baseline.
What does low torque mean on a shaft?
5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.
What happens if you have a longer shaft?
As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel. A shorter shaft, on the other hand, will cause a more consistent strike pattern, but impact location will tend to be on the toe. A golfer’s physical size, arm length, swing speed, consistency, ...
What happens if your driver shaft is too stiff?
Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights. A shaft that’s too weak, on the other hand, may cause shots to spin too much, fly too high, and widen dispersion patterns.
How many inches is Rickie Fowler's shaft?
A look at Rickie Fowler's fairway wood shaft, which measures 42 inches with 0.5 inches of tipping.
Does tipping a shaft change the bend point?
Remember, though, that tipping a shaft will change the bend point, and it’s also irreversible, so make sure you know the purpose behind tipping your shaft. 2. Weight. The weight of a shaft has a similar correlation to performance as flex.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
What are the different types of golf shafts?
There are two basic types of golf shafts: steel and graphite. Often, your club will have been originally assembled with either of these types of shafts, however if you decide that you would like to change your type of shaft, you should know the difference between each shaft type. There are some newer options that combine the two materials, ...
How to know if you have picked the wrong shaft?
If you have picked the wrong shaft, you will immediately know. When you go to swing the club, you will find that the ball won’t go as far as it should, and you may hit the ball off-centre. You may also find that the club may feel “dead” if the shaft is too heavy or stiff, or alternatively it can feel too soft and weak – both can significantly impact your game. Therefore, if you don’t know what to do, don’t guess, because you may end up with the wrong shaft for you and it can be costly to rectify if you have to buy more shafts or new golf equipment.
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
What does the shaft do in golf?
Having the right shaft in your golf clubs makes a world of difference to your game. The shaft affects club performance on everything from spin, launch, and speed. The wrong shaft could cause the ball to launch too high or too low as well as spin too much and cause you to lose distance.
How can the right golf shaft and Flex improve my game?
Golfers often want to know just how the right shaft and flex can help their game. In these videos, you’ll learn how flex works with your swing and the improvements the right shaft and flex can make for you out on the golf course.
What Materials are Shafts Made of?
In our first video, you’ll learn about the different type of shaft materials and how each can affect your game. Find out the three types of golf shafts, the benefits of each one, and see which type best fits your game in this video.
What about weight, kick point, and torque?
Golfers often want to know about the three main characteristics of a golf shaft: weight, kick point, and torque. In this video, you will learn how these three specs are actually connected and how they affect each other.
Can you get custom golf clubs from TGW?
Now that you have learned a few things about picking the right golf shaft, it’s time to get your clubs customized to help you play your best! At TGW, we have an incredible selection of custom golf clubs. All of our custom golf clubs are built by the manufacturers so you can trust you are getting the best possible club for your game. Start shooting lower scores and see the difference the right golf shaft can make in your game today.
What is the X stiff range?
X-stiff – This is the range where most high-level players fall. If you’re swinging the driver above 105 mph, it might be time to get some X stiff shafts in your set.
Can you extrapolate your swing speed to driver?
You should consider that your swing speed for your irons might not extrapolate perfectly to driver (and vice versa), so while a certain flex might be right in some clubs, that might not be the case in others.
Is True Spec Golf affiliated with 8AM?
Our friends over at True Spec Golf shared some data with us that illustrates the shaft that’s right for you based on your swing speed throughout the bag. ( True Spec and GOLF.com are affiliates of 8AM Golf ).
Why is my golf ball inconsistent in all directions?
Improperly fit shafts can cause inconsistency in flight direction, due to the mismatched flex characteristics of the shaft to the player, and the players perception and compensation for the mismatched flex. Generally, too flexible a shaft can cause inconsistent directional ball flight in all directions. Too stiff a shaft can lead ...
Can club fitters analyze data?
Yes, we as club fitters can analyze data we acquire on many of the wonderful launch monitors that are available, and narrow down choices based on the data. This does take some of the guess work out of the decision and gives us performance data to base a decision on.
Do shafts always equal performance?
A broad range of prices exist in the shaft category. Price does not always equal performance. From a performance standpoint, shafts should be chosen based on their specifications and how those specifications fit the players swing characteristics, providing the desired trajectory, feel and consistency.
Matching Trajectory and Spin
Spin and Trajectory Differential
- The reality of shaft fitting is that the differential in spin and trajectory from lowest to highest is actually quite modest. In a typical driver fitting, for example, a Low trajectory shaft may produce a 9 degree launch while a Mid-High trajectory shaft may only increase the launch to 11 degrees, and spin may only increase from 2,500 to 2,900. Of course this can be significant in optimizing dista…
Building Clubs and Shafts to Your Recommendations
- When we build your clubs or shaft with tip adapter, we build to the EXACT specifications recommended. Learn More. We DO NOT just install an A, R, S or X Flex and hope the results are correct. We know that each shaft has its own characteristics (weight, CPM(cycle per minute), loading curve profile). This means that we may have to use a different flex than what is labeled …