How Do I Remove the Shaft of a Golf Club?
- Step 1. Place the shaft, or what remains of it if it is broken, in a vise parallel to the floor. Secure the shaft in the...
- Step 2. Apply heat evenly to the hosel for about a minute, using a heat gun or heat torch. This will break down the...
- Step 3. Remove heat from the hosel and twist the club head counterclockwise. It should...
How do you replace the shaft on a golf club?
Steps to Replace a Golf Club Shaft at Home
- Choosing the Right Golf Club Shaft. To begin with, you will need to get your hands on a golf club shaft. ...
- Cleaning the Club. Now, take out your utility knife. ...
- Taking the Shaft Out. It is now time to release the head from the shaft. ...
- Scrapping off Any Residuals. ...
- Installing a New Shaft. ...
- Finishing Touches. ...
How do you remove a golf shaft?
Removing a Rear Drive Shaft – This is how you do it
- Mark the Drive Shaft and Remove the Bolts. To know how to remove drive shaft, getting the exact estimation of drive shaft is necessary before beginning the process.
- Eliminate the Drive Shaft Flange. Drive shaft flange can be easily removed by gently shocking with a plastic hammer. ...
- Take out the Drive Shaft. ...
- Reinstall the Drive Shaft and Other Parts. ...
How to remove a golf shaft without a puller?
How to Remove a Golf Shaft From the Head
- Remove the ferrule. The ferrule is the small plastic band that sits just above the hosel. ...
- Place the club in a vise to position it for shaft removal. The club should lie horizontally. ...
- Heat the glue inside the hosel. The hosel is the area where the shaft fits into the clubhead. ...
- Clean excess glue out of the hosel to make a comfortable fit for the new shaft. ...
How much does a golf club shaft replacement cost?
With a vast array of shafts to choose from, there are options to fit every budget. For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories.
How do you remove a golf shaft at home?
0:172:32How To Remove A Steel Golf Shaft From A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can also use a heat gun but it's going to take three times as long. The other things that you'reMoreYou can also use a heat gun but it's going to take three times as long. The other things that you're going to need or a club making vice vice clamp some heavy-duty gloves and probably a knife.
How do you remove a golf driver head shaft?
0:384:28How To Remove A Graphite Shaft From A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you needed a special tool called a graphite shaft puller you're several on the market. That areMoreSo you needed a special tool called a graphite shaft puller you're several on the market. That are commercially available but they do essentially the same thing they securely clamp the shaft.
Can you remove a golf shaft with a hair dryer?
Another alternative heat source I've had success with (literally twice) was a hair dryer. I read about golfers packing prized putters in their carry-on luggage, re-shafting at their hotel, and then removing the head with the hotel hair dryer prior to traveling home. Following that, I tried it and it worked.
How do you remove graphite shaft without a puller?
0:193:50How To - Pull a graphite golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain using a butane torch you can actually really focus the heat which is a lot better than sayMoreAgain using a butane torch you can actually really focus the heat which is a lot better than say trying to use a heat gun which could end up damaging. The fibers of the golf shaft.
How do you pull a graphite shaft?
3:345:40How to Remove a Golf Shaft | DIY project Graphite Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a club head. And try out different shafts. So this would allow me to do that i could obviouslyMoreUse a club head. And try out different shafts. So this would allow me to do that i could obviously get fitted.
How do you remove graphite shaft from hosel?
0:515:54How to Remove a Graphite Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo using a heat gun on high. I'm gonna heat the just the Ferro part and then cut it off with a knifeMoreSo using a heat gun on high. I'm gonna heat the just the Ferro part and then cut it off with a knife. It's ready to cut off because you'll kind of see it start to melt.
What temperature does golf epoxy melt?
You must apply enough heat to break the epoxy bond. Shaft epoxy breaks down at about 250 degrees Farenheit.
Do you have to remove old golf grip tape?
Remove old grip tape before you throw on a new grip. Unless by some miracle the tape under your grip is still sticky and uniform after removing your old grip, you're going to want to get rid of all the old tape completely.
How do you remove epoxy from golf clubs?
Apply heat evenly to the hosel for about a minute, using a heat gun or heat torch. This will break down the epoxy that bonds the shaft to the hosel and make removal easier. If you are working with graphite shafts, use a heat gun, not a torch. Wear goggles and protective gloves.
How do you replace a graphite shaft on a golf club?
0:157:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is recommended the house will be cleaned using cotton swabs and acetone. Simply dip one or two ofMoreIt is recommended the house will be cleaned using cotton swabs and acetone. Simply dip one or two of the cotton swabs into acetone and swab out the inside of the club head hosel.
How do you cut a graphite golf shaft at home?
1:2914:05Golf Club Repair - How To cut a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big toolMoreIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big tool nut don't skimp even if it's a hand tool.
How do you pull a shaft adapter?
6:4617:13How To remove / Install a Golf shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fair or the adapter. Piece and the adapters are made out of aluminum. And aluminum transfers aMoreThe fair or the adapter. Piece and the adapters are made out of aluminum. And aluminum transfers a truckload of heat okay a bunch of heat and. So it doesn't take like you're heating up a hassel.
How are golf club heads attached to the shaft?
Golf Club Epoxy. Adhesives are used in many different sports equipment bonding applications. One such application is that of bonding heads onto shafts for golf clubs. It sounds like an easy application and in principle it is – put some adhesive on the tip of the shaft and then insert it into the club head.
How do you replace a golf driver head?
1:465:54Golf Equipment : How to Change a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp as that shaft heats the epoxy starts to break down. And then the shaft the head of the club willMoreUp as that shaft heats the epoxy starts to break down. And then the shaft the head of the club will come will pull off of that shaft. Once that epoxy gives way then you can turn your heat gun.
How do you remove a broken graphite shaft from club head?
1:357:16Removing a Broken Graphite Shaft 2019 -Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this kind of shaft extraction is no different alright so the easiest way that I have found isMoreAnd this kind of shaft extraction is no different alright so the easiest way that I have found is you have to heat up this area and then you step drill.
Can you put a new driver head on an old shaft?
The only way to know if we can put your old fitted shaft into a new head it to pull the shaft, weight the head and test the new head with the old shaft. The head may be heavier or lighter, the hosel dimensions may be off which could cause a length issue.
How to get ferrule off of a car?
Take the utility knife and cut off the small plastic piece at the base of the shaft , also called the "ferrule." If the ferrule doesn't come off easily, use the butane torch to heat it a bit, and then it should come right off.
How to get epoxy off of a clubhead?
Apply pressure to the clubhead, while applying heat to the hosel at the same time. Continue doing this until the epoxy bond has softened and the clubhead comes off easily.
How to make a golf club with masking tape?
Step 1. Completely cover the head of the club with masking tape to prevent the head from being scratched during the process. Now, place the club in the vise, so that the middle of the shaft is the part being held in the vise. Make sure the club is held securely.
Can you replace a golf club shaft instead of replacing the entire club?
By Tami Fisher. Replacing a golf shaft instead of replacing the entire club can save money. Once in a while, something happens to cause a golf club shaft to splinter or even break. When this happens, the old shaft must be removed and a new one installed in its place.
How to get glue out of a golf club?
Heat the glue inside the hosel. The hosel is the area where the shaft fits into the clubhead. Light your propane torch and apply heat to the underside of the hosel. This will melt the glue. As you apply heat, grab the clubhead and gently turn it to begin working it out. Avoid cranking with too much force.
How to remove a ferrule from a hosel?
The ferrule is the small plastic band that sits just above the hosel. With a utility knife or box cutter, cut a vertical slit in the ferrule. Using a flathead screwdriver or pliers, pry the ferrule from the shaft and discard it.
How to get rid of loose glue?
Twist it to remove loose glue. A small amount of mineral spirits will help clean out the area.
Do you need to reshaft a golf club?
The need to reshaft golf clubs is common. It is sometimes necessary to have a professional tackle a complete reshaft job; however, it can make his job easier if you eliminate a step in the process. Removing a golf shaft from the head is fairly simple; however, it must be done carefully and properly.
What to do if your golf club shaft is bent?
If the shaft of your golf club is bent or broken, do not discard the entire club. Instead, remove the clubhead from the damaged shaft and install it on a new one. Disconnecting the golf club shaft from the head also allows you to try the latest shaft technology on the market without purchasing a whole new club.
How to remove ferrule from golf club?
Step 1. Use a utility knife to scrape off the ferrule at the connection point between the shaft and the clubhead. Scrape down toward the head and away from your body.
How to catch a club head off a golf club?
Press down on the hosel with a pry bar. Do not twist the head off, as this can damage the shaft. As you press on the hosel, have your other hand ready to catch the clubhead when it drops off the shaft.
Can you remove graphite shafts?
It is important to know the proper technique for removing a graphite shaft. A graphite shaft could be ruined forever if removed by the conventional twist and pull method that we use for steel shafts. The fibers in the shaft tear apart when you do this.
Can you load a spring in a vise?
If you buy a spring that is larger on the inside than a shaft, you can load it in the vise to make the hosel protector apply continuous pressure to the club head.
Introduction – DIY Golf Shaft Pulling Tricks
We previously wrote about “ How to Pull a Golf Shaft ” where we cover the basic technique for properly and safely pulling both steel and graphite golf shafts. While that technique is a great best practice, and the only foolproof (-ish) safe way to pull graphite shafts, there are a few hacks you can use for pulling steel shafts at your home.
The Stove
This is the same technique as “by hand” but you use the stove for your heat source. I’ve been in a couple of random situations where I didn’t have a propane torch or heat gun at my disposal and had to pull a steel shaft from a head. All I did was fire up a burner on the stove and use it to heat the epoxy.
In a Vise
The vise technique is one of the great at-home DIY golf shaft pulling tricks. It’s not dissimilar to the “by hand” technique, but gives you a little more leverage and keeps your hands away from the heat. For this technique, you can approach in two different ways.
Boiling Water
This is my absolute favorite DIY golf shaft pulling trick based on ingenuity alone. What’s nice about this technique is that it works well and makes saving your sweet custom ferrules feasible as long as they weren’t super epoxied on. In order to do this, fill a pot with enough water to submerge your club head in.
Conclusion
Like I said in the intro, I’m going to recommend using traditional shaft removal techniques 100% of the time. You can find that approach here . That said, there are situations that may require an alternative approach and hopefully these DIY golf shaft pulling tricks will help you out there.
