golf what is a fork

What are the parts of a fork called?

Blade – The horizontal portion of the fork upon which the load is supported. Heel – The radiused portion of the fork connecting the blade to the shank. Shank – The upright (vertical) portion of the fork to which the supporting hooks are fixed. Hooks (or clips, hangers) – Lugs attached to the shank to support and retain the fork on the carriage.

How do you know when a fork is worn?

Forks are considered worn beyond their carrying capacity once they are at 90% of their original thickness. In order to check this, you apply the outer jaws of the wear caliper to the shank portion of the fork because it is rarely worn.

What does'fore'mean in golf?

"Fore!", originally a Scots interjection, is used to warn anyone standing or moving in the flight of a golf ball.

What is a two-tined fork used for?

This two-tined fork has especially long tines and is used for carving large chunks of meat, such as hams. The tongs hold the meat down while the carving knife is passed between them, allowing for more precise (and safer) carving. 2. Cocktail Fork These small two-tined forks are meant for adding garnishments to drinks.

What is a green fork?

The Green Fork is one of the three main rivers of the Trident in the riverlands, the other two being the Blue Fork and the Red Fork. The river is named after its murky green color, which comes from moss near its swampy source.

What's a divot in golf?

Divots are the marks made in the grass on the golf course that are cause by golfers as they play. They often brush the turf with their clubs, or leave marks on the putting greens.

What is a divot used for?

Divot tools are used for repairing pitch marks, also called ball marks, in the surface of the putting green. Pitch marks are often left when a golf ball plops down onto a green, leaving a little depression in the ground.

What is a Pitchfix used for?

1:032:33Video Review: Pitch Fix Divot Repair Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey also have this the standard. Tool which you can use to mark your golf ball fits right on theMoreThey also have this the standard. Tool which you can use to mark your golf ball fits right on the bill of the cap or maybe on your pant leg something like that a lot of gals like that.

What does Bunker mean in golf?

A bunker is a depression near the green or fairway that is usually filled with sand. It is difficult to hit the ball out of the bunker and to enter it is therefore considered punitive to a golfer who misses the target with the previous shot.

Should you take a divot with every iron?

You should take a divot when striking a golf shot, but not with every club. Wedges and short irons when hit correctly will create a clear divot, imparting backspin on the ball, yet longer clubs like 5-irons and hybrids should 'brush' the turf, rather than take a deep chunk out of the ground.

How do you use a fork in golf?

0:071:06Golf Rules: Repairing your pitch marks correctly - YouTubeYouTubeStart of suggested clipEnd of suggested clipTowards the center of the pitch mark. And go round each Center if you do this movement which isMoreTowards the center of the pitch mark. And go round each Center if you do this movement which is pulling up you're likely to break the roots of the grass.

How many golf clubs does a player can carry?

14 clubsAs a golfer reading this, you are likely aware that the rules of golf permit each player to carry no-more than 14 clubs in their bag for any given round. Having a limit on the number of clubs allows golfers to use strategic planning to determine which combination of clubs they will carry in their bag.

How many holes does a standard golf course have?

18 holesThose are the broad strokes of how a typical golf course came to have 18 holes.

Do you need a golf divot tool?

0:112:07Golf Tips With Conan Elliot : How to Use a Golf Divot Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell actually there's no such thing as that. They're they're pitch mark. Or or ball mark replaceMoreWell actually there's no such thing as that. They're they're pitch mark. Or or ball mark replace tools a divot is actually the piece of grass you take out of the ground out in the fairway.

What is a divot tool and ball marker?

A divot tool is a fork-like implement that allows you to repair divots caused by your ball on the green. When the green is soft and your ball lands on it at a steep angle, it creates a dent. Stick the forks of the divot tool into the green around the indentation and lift it slightly.

What is a pitch tool?

noun A kind of stone-chisel or knapping-tool, made of antler or other hard substance, and anciently used with a hammer for flaking off stone in making arrow-heads, etc.

What is the fore in golf?

Fore (golf) The tough rubber core of a golf ball makes it a hazard to others following a wayward shot, despite its weight not exceeding 1.620 oz (45.93g). "Fore!", originally a Scots interjection, is used to warn anyone standing or moving in the flight of a golf ball.

Where did the term "fore caddie" come from?

A possible origin of the word is the term "fore-caddie", a caddie waiting down range from the golfer to find where the ball lands. These caddies were often warned about oncoming golf balls by a shout ...

What does "fore" mean in golf?

Perhaps the most common usage of fore is when golfers hit the ball farther than they expected, or when they play a stroke without realizing that there is a golfer up ahead who might be in danger.

Where did the word "fore" come from?

There are several different theories. Two of the most commonly cited are that "fore" evolved from another golf word, forecaddie; and that "fore" has its origins in military usage.

How to hear a yell of fore?

When you hear a yell of fore, duck and cover. If you can dart behind a tree, crouch behind a golf cart or golf bag, do so. Put your hands and arms over your head and turn away from the direction of the yell.

What is the equipment used in golf?

Types of equipment include the golf ball, golf clubs, and devices that aid in the sport.

What is a wedge in golf?

Wedges are played from difficult ground such as sand or the rough and for approach shots to the green. Putters are mostly played on the green, but can also be useful when playing some approach shots. Putters have minimal loft, meaning the ball stays close to the ground when struck.

Why do golf courses not use tees?

This is rarely done in modern times, as a tee is easier to place, hit from, and recover, but some courses prohibit the use of tees either for traditional reasons, or because a swing that hits the tee will drive it into or rip it out of the ground, resulting in damage to the turf of the tee-box.

What are the different types of golf clubs?

There are three major types of clubs, known as woods, irons, and putters. Woods are played for long shots from the tee or fairway, and occasionally rough, while irons are for precision shots from fairways as well as from the rough. A new type of club called a hybrid combines the straight-hitting characteristics of irons with the easy-to-hit characteristics of higher-lofted woods. A hybrid is often used for long shots from difficult rough. Hybrids are also used by players who have a difficult time getting the ball airborne with long irons. Wedges are irons used to play shorter shots. Wedges are played from difficult ground such as sand or the rough and for approach shots to the green. Putters are mostly played on the green, but can also be useful when playing some approach shots. Putters have minimal loft, meaning the ball stays close to the ground when struck. The most common clubs to make up a set used to be a driver, 3 and 5-woods, irons numbered from 3 to 9, pitching wedge, sand wedge, and putter. Modern sets commonly include hybrids, often replacing the longer irons and 5-wood, and/or additional wedges such as a gap or lob wedge. Players may choose to play with any combination of clubs, limited by the rules to a maximum of 14.

What is a golf cart?

Golf carts are vehicles used to transport golf bags and golfers along the golf course during a round of golf. Hand carts are designed to hold only the bag, and are used by players while walking along the course to relieve them of the weight of the bag.

Why do golfers use carts?

Chief among them is the sheer length of the modern course, and the required "pace of play" instituted by many courses to prevent delays for other golfers and maintain a schedule of tee times.

What are golf bags made of?

Modern golf bags are made of nylon, canvas and/or leather, with plastic or metal reinforcement and framing, but historically bags have been made from other materials. Golf bags have several pockets designed for carrying various equipment and supplies required over the course of a round of golf.

What is a table fork?

The truth of the matter is that a table fork is halfway between a salad fork and dinner fork in size and is never used at a formal setting.

How many different types of forks are there?

11 Different Types of Forks. Last Updated on December 17, 2020. The US tend to take forks for granted. In the Orient, chopsticks are traditional, with forks only recently becoming widespread. In Europe, the fork didn’t begin to catch on until the 1500s. During the Medieval period, a predecessor to the modern day roast and carving forks was in use, ...

What is a spaghetti fork?

Spaghetti Fork. This unusual variant of a fork might seem a little odd at first. It has three to four tines with ridges added to the tines, making it easier to twirl pasta. As dinner forks already perform this task efficiently, the spaghetti fork is more of a novelty than a necessity and isn’t part of a formal setting.

How many tines does a fruit fork have?

More popular in European fine dining than in the US, fruit forks are shorter than a table fork and usually have four tines (but can have two or three as well). They’re designed specifically for making it easier to spear round fruits such as grapes or small berries while also being perfect for melons and other larger fruits.

What are the two tined forks used for?

2. Cocktail Fork. These small two-tined forks are meant for adding garnishments to drinks. The tines are a perfect size and distance apart for handling olives and other garnishments.

What was the purpose of the carving forks in the medieval period?

During the Medieval period, a predecessor to the modern day roast and carving forks was in use, but only in major feasts for the purpose of spearing slabs of meat to put onto your trencher (a plate made of bread that was then donated to the poor after a feast ended).

What are the tines on a cocktail fork?

The tines are a perfect size and distance apart for handling olives and other garnishments. Sets of cocktail forks may come in a range of sizes. While most commonly found in bars, these forks can also be used to eat seafood may be employed in both formal and informal settings. 3. Dessert Fork.

What is a shank on a fork?

Shank – The upright (vertical) portion of the fork to which the supporting hooks are fixed. Hooks (or clips, hangers) – Lugs attached to the shank to support and retain the fork on the carriage. They may be made as non-integral hooks (attached to the shank) or as integral hooks (formed integrally with the shank).

Why do you need wide forks?

Of course, some people will need narrower forks or wider forks depending on the application. Often wide forks are desired to spread a load more evenly. Fork Thickness – Typically, the fork thickness is selected mainly to maintain capacity. Thicker keeps flexing down.

Why are bolt on forks so rare?

Bolt-on Forks – These forks are fairly rare because they bolt directly to the carriage and diminish any ability to move them laterally. Coil Handling – These forks are chamfered on the edges to enable them to move coils of steel, reels, concrete pipes etc. when straddling the load is desired.

Why do forks come in different tapers?

Forks can come in different tapers to enable a load to be picked up in different ways. Typically the main difference is how thin they need to be at the tip in order to pick up a given load.

What is the most common tip on a fork?

Style 1 – This is the most common tip. The front of the fork is flat with a gently rounded edge. Style 2 – These are a fairly sharp fork without the flat front section (popular for block forks). Style 3 – These are almost completely flat across the entire width of the tip and are standard on forks over 7” wide.

What is the standard fork length for a Class II truck?

Fork Length – The most common fork length is 42-inchs for both Class II and Class III carriages.

What is a block handling fork?

Block Handling Forks (brick forks) – These forks are predominantly for lifting concrete blocks in large numbers. These forks are really thin and are usually used in quantities of more than 8 at a time in order to spread the load more evenly and reduce the risk of the skid losing structural integrity.

Tee Box and Teeing Area

For starters, let’s square away exactly what the tee box and teeing area are because they are two different things and the terms should not be used interchangeably.

Golf Tee Box Rules You Must know

Think of the teeing area as its own country with laws its citizens must abide by. These are some of the most important laws to know.

Which Tees Should You Play?

There are no rules on which tee box to play, and despite what you’re likely to hear in the grille room or 19th hole, tees are indiscriminate of age and gender. Golfers are free to play from whichever set they want to, unless they’re in a competition, in which case the Committee will dictate the tees.

Bottom Line

Many golfers take the tee box and teeing area for granted. However, knowing the rules in this oh-so-important area of the golf course just may come in handy. The next time you step inside the borders of the teeing area, you’ll arrive with hope and some extra knowledge.

About The Author

Nick Heidelberger is the editor of GolfLink. He has a degree in journalism from the University of Idaho and has been navigating his way around the golf course for more than 10 years. He previously worked for the New England Section of the PGA of America.

How to set up a putting fork?

Setting up the Putting Fork is pretty simple: lay it down on the putting green, anchor it with tees, and then set a pair of tees to your chosen level of difficulty. There is some fine tuning required to get the height of the “gate” tees correct: if the tees are too high or too low, it will make the gate wider than it should be. There will also be a little extra set up time required if you want to get the Putting Fork aimed precisely at a hole, but, aside from gaining the positive feedback of hearing the ball fall in the cup, this is unnecessary (more on this later).

What is a T shape putter fork?

Through the “T” shaped cut out, the Putting Fork allows the golfer to set the putter face perfectly square to the line before they make their stroke. Based on watching dozens of golfers putt every day, I can confidently say that this alone can change the game for at least half the golfers out there.

What does the putter say after hitting one putt squarely into one of the tees?

The Putting Fork produced what might be this year’s funniest Peanut Gallery reaction: after hitting one putt squarely into one of the tees, the putter loudly announced, “This thing tells me that I suck.”

Has anyone out there permanently mastered putting?

Has anyone out there permanently mastered putting? If not, you’re going to be practicing putting for the rest of your golfing career. And if you’re going to practice , you may as well get solid feedback so you get the most out of your time.

How Did 'Fore' Enter The Golf Lexicon?

When You Should Yell Fore on The Golf Course

'Fore Right' and 'Fore Left'

What to Do When You Hear 'Fore!'

• The instinct for many golfers, when we hear a "fore!" ring out across the golf course, is to turn in the direction of the yell and look for any golf ball that might be heading our way. Bad idea. You don't want to get hit in the face (or any other sensitive areas). When you hear a yell of fore, duck and cover. If you can dart behind a tree, crouch b...

See more on liveabout.com