how are golf shafts made

How is a golf shaft manufactured?

Graphite shafts are manufactured by wrapping sheets of graphite composite material around a steel mandrel. The composite sheets are cut into various sizes and shapes depending upon the design of the shaft. These cut portions are called flags.

How are steel shafts made?

1:103:47How is a Nippon golf shaft made? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy Mission steel in Japan. Now that plate is forced. Through some guys to make it into a tube whichMoreBy Mission steel in Japan. Now that plate is forced. Through some guys to make it into a tube which is making about inch and a quarter diameter. This that's outside diameter. It's welded at the scene.

What are most golf club shafts made of?

Club shafts may be made from chrome-plated steel, stainless steel, aluminum, carbon or graphite fiber-reinforced epoxy, boron fiber-reinforced epoxy, or titanium. Grips are usually made from molded synthetic rubber or wrapped leather.

What material are golf shafts?

Generally, the shaft is made using a steel shaft that has a graphite tip. The steel shaft allows the player to control the ball flight more, whilst the graphite tip ensures the golf ball can go the distance without any unwanted vibrations.

Are graphite golf shafts Hollow?

Graphite shafts are made out of carbon fiber and epoxy. Carbon fiber is wrapped around a rod using epoxy resin. The entire thing is then heated and the rod is removed. The result is a hollow graphite shaft.

What metal are golf irons made of?

All cast iron clubs are made from stainless steel. Stainless steel combines iron with nickel and chromium and other trace materials. Most good quality irons are made from either 17-4 or 431 grade stainless steel.

Do any pros use graphite shafts?

In total 100% of the top 100 PGA Tour pros use graphite shafts in their drivers, fairway woods and hybrid clubs. 14 out of the top 100 use graphite shafts in their utility irons while 21 pros use steel.

Are graphite shafts better than steel?

Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.

What kind of steel are golf shafts made of?

Stainless steel is the most used material in golf. The material is generally inexpensive and easy to cast into all the shapes that you see golf clubs made plus durable enough for everyday play. There are two main types of stainless steel used in golf club heads.

How thick is a golf shaft?

Design. The shaft is roughly . 58 inch/14.7 millimeters in diameter near the grip and between 35-48 inches/89–115 cm in length. Shafts weigh between 45 and 150 grams depending on the material and length.

Are driver shafts steel?

For the last six years, every PGA Tour player has used a graphite shaft in his driver during competition. Compared to steel shafts, which were the driver shaft of choice for most pros until around the early 2000s, graphite shafts are made with lightweight materials to help golfers pick up swing speed.

Do all woods have graphite shafts?

In almost all cases, your driver and fairway woods will have graphite shafts. The real question comes down to the irons. The status quo has always been that professionals and low-handicap golfers use steel shafts, while amateurs and beginners benefit more from graphite shafts.

How are graphite shafts made?

Graphite shafts are manufactured by wrapping sheets of graphite composite material around a steel mandrel. The composite sheets are cut into various sizes and shapes depending upon the design of the shaft. These cut portions are called flags.

What is Aerotech Steefiber?

Aerotech Steefiber shafts have a unique design that combines the strength and stability of steel with the feel and performance of carbon fiber. Their unique design is getting some traction on the PGA Tour with Matt Kuchar. and Cameron Beckman playing the Steelfiber shafts. For more on the manufacture and benefits of these shafts, let’s take a tour…

What is a golf shaft made of?

Steel shafts are either pulled or rolled and welded. Graphite shafts are made with multiple layers of material wrapped around a mandrel.

Do You Want the McDonalds Burger, or The Peter Luger’s?

We often like to compare shafts to hamburgers. You could go to McDonald’s and get a burger that will satisfy you. While the meat isn’t fresh, or the highest quality, it can satiate your appetite.

What does it mean to choose the wrong shaft for a golf club?

Choosing the wrong shaft will make it much harder to access the center of the face more consistently on the course , and the last thing we want you to do is to make golf harder on yourself!

How much weight should a golf shaft be?

Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...

Why didn't Nick Price find a stiff shaft?

Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.

What is fitting in golf?

When we put a customer through a fitting, we determine the right profile, weight, and flex that is required. Essentially we are writing a prescription for the golfer’s swing, and order the shaft to match what we believe will help them the most.

Why is shaft profile important?

Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...

What is the most misunderstood product category in the golf industry?

One of the most misunderstood product categories in the golf industry is shafts . There are plenty of myths and mistruths out there that we wanted to clear up for you in this article and share what we have learned at Pete’s Golf over the past several decades.

What is a flex shaft?

The most common is the shaft flex. Simply, the shaft flex is the amount that the shaft will bend when placed under a load. A stiffer shaft will not flex as much, which requires more power to bend and "whip" through the ball properly (which results in higher club speed at impact for more distance), while a more flexible shaft will whip with less power required for better distance on slower swings, but may torque and over-flex if swung with too much power causing the head not to be square, resulting in lower accuracy. Most shaft makers offer a variety of flexes. The most common are: L (Lady), A (Soft Regular, Intermediate or Senior), R (Regular), S (Stiff), and X (Tour Stiff, Extra Stiff or Strong). A regular flex shaft is generally appropriate for those with an average head speed (80-94 mph), while an A-Flex (or senior shaft) is for players with a slower swing speed (70-79 mph), and the stiffer shafts, such as S-Flex and X-Flex (Stiff and Extra-Stiff shafts) are reserved only for those players with an above average swinging speed, usually above 100 mph (160 km/h). Some companies also offer a "stiff-regular" or "firm" flex for players whose club speed falls in the upper range of a Regular shaft (90-100 mph), allowing golfers and clubmakers to fine-tune the flex for a stronger amateur-level player.

Why is the kickpoint important?

Because kickpoint also has an effect on how much of the shaft flexes, it can be used to fine-tune the shaft's flex to the player's individual swing tempo. Widely overlooked as a part of the club, the shaft is considered by many to be the transmission of the modern clubhead.

What is stiff tip shaft?

These shafts offer the same flex throughout most of the shaft, in order to attain the "whip" required to propel the ball properly, but also include a stiffer tip, which cuts back drastically on the lateral torque acting on the head.

What is the difference between a low kick and a high kick?

Low-kick shafts flex the most at a point closer to the clubhead, which causes less of the shaft to flex and produces a higher launch angle. The higher the kickpoint, the lower the launch angle.

What is a kick point on a golf club?

Kick Point - The point over the length of the shaft where it is designed to bend. Individual shaft models are designed to flex at different points. Generally, kick points nearer to the grip end of the club tend to produce lower launching, lower spinning shots. Kick points nearer to the club head tend to produce higher launching, higher spinning shots.

How much does a spherical shaft weigh?

Shafts weigh between 45 and 150 grams depending on the material and length.

What are the variables used to tailor a golf club to a particular player?

Length and Weight - These variables are used to tailor a golf club to a particular player. Shaft lengths can be altered to suit golfers of different heights. Golf shafts are manufactured in various weights to suit players of any skill or strength level.

What to know about golf shafts?

In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!

What shafts do golfers use?

For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.

What is the best shaft for golf?

Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.

Why does my golf shaft have a slice?

When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.

Why do golf clubs have shafts?

During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.

What is the most common shaft material used in golf clubs?

Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.

How much does a graphite shaft weigh?

Graphite shafts are also much lighter weight (50-85 grams) while steel shafts can start at 120 grams in most cases.

How many shafts does Penley have?

Penley’s high quality golf shafts are known by Long Drive Championship players and PGA players worldwide. Since 2010, Penley has had over 100 shafts in play and have placed in the following Tournaments using the ET2 and the Hybrid Heater2:

What is a Penley shaft?

All new Penley golf shafts are primarily designed to create the optimum club for the player, including the Touring Pro. Our design yields a shaft with precision and control like no other, it avoids the compounding effect of a players’ miss-hit and offers more greens in regulation.

Who played Penley shafts in the 2004 Buick Invitational?

Great players such as John Daly (who won the Buick Invitational in ’04 using Penley), Lanny Wadkins, Bart Bryant, Joe Durant, Vijay Singh and many more have played Penley shafts.

Who won the Buick Invitational in 2004?

1 5th place and 2 in the top 20’s – Viking Classic. 1 top 20 – McGladery Classic. Great players such as John Daly (who won the Buick Invitational in ’04 using Penley), Lanny Wadkins, Bart Bryant, Joe Durant, Vijay Singh and many more have played Penley shafts. Please visit our Products page for specs and information of our newest shafts available ...