Golf-FAQ.com

how bypass golf cart solenoid

by Robert Volkman Published 2 years ago Updated 2 years ago
image

Steps to bypass the solenoid in EZGO golf cart:

  • Take the controller cover after disconnecting the negative terminals of the battery.
  • Now, disconnect the larger wires from the solenoid.
  • After this, connect the high side wires and large wires terminals bypassing the solenoid.
  • Try starting the cart. If the cart starts, then the problem is a solenoid.
  • If the cart doesn’t start, then the problem is elsewhere and not the solenoid.

To bypass the solenoid of your golf cart, simply connect both the large side wires of terminals of the solenoid. And after making the connection, attempt to start the cart. If you fail to start, this is an indication that there is no problem with your solenoid.

How to bypass solenoid on an EZGO golf cart?

How to bypass solenoid on an EZGO golf cart? Sometimes, a person may not have a multimeter or a voltmeter with them. Therefore, to check the solenoid, you can connect the large wires into the solenoid together and see if the cart starts.

How to fix a golf cart solenoid that won’t start?

Connect the two high side large wires to the large terminals of the solenoid. Try to start the golf cart after establishing this connection. If the cart does not start, then it is a clear sign that your solenoid does not have a problem. However, if it does, this does not indicate that the solenoid is the cause of the problem.

How do you test an electric golf cart solenoid?

With an electric golf cart solenoid, you might experience no clicking when you try to engage the vehicle. Using the voltmeter on the DC volt setting in the 200 range, you need to test. Do this by checking the reading on the smaller terminals first while turning the ignition on.

What are the parts of a golf cart solenoid?

A solenoid typically has two main parts – a steel plunger and a thin wire coil. Since solenoids need to work very frequently; turning on and off each time you use the cart, they are prone to wear and tear easily.

image

How do you bypass a solenoid?

5:037:29Solenoid Bypass - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do to bypass the solenoid. And make the starter turn is basically connect this hardMoreAll you have to do to bypass the solenoid. And make the starter turn is basically connect this hard copper wire to this point on the battery. Then you're not doing anything with the solenoid.

How do you know if you have a bad solenoid on a golf cart?

If your golf cart fails to turn on when you turn the key on, this is the most obvious sign of solenoid failure. The solenoid clicks a little with the ignition system in regular operation; in most cases, a failing solenoid will not snap.

How do you test a electric golf cart solenoid?

Turn on the engine of the cart and press the pedal downwards. If you hear a clicking sound, then it means that the low side voltage is working. But, if there is no such sound, it means that either there is no low side voltage or there is a problem with the solenoid. Use a voltmeter and engage the solenoid.

Why does my golf cart click but not move?

A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.

Will an electric golf cart run with a bad solenoid?

The ability of your golf cart to function properly depends largely on the solenoid. If the solenoid is broken and not working correctly, you may notice your golf cart won't start, picking up speed, or even working at all (issues with acceleration could also be caused by a bad speed controller).

Will a bad solenoid click?

One possibility is the solenoid. A single “click” sound comes from the engine compartment or from under the car. This could mean that the solenoid is trying to engage but that the internal components are stuck and unable to work properly. Repeated “clicking” sounds usually indicate a dead battery.

What does the resistor do on a golf cart solenoid?

Prevents arcing across your solenoid terminals and keeps your electrical system safe.

How do you hotwire a golf cart?

InstructionsEnsure that power to the cart is turned on.Locate the two wires connected to the cart's ignition. ... Cut the wires and strip the ends.Touch the ends of the wires together to force the engine to turn over without turning the ignition.Secure the wires together with electrical tape.

How do you check if a solenoid is working?

Do your best to listen for a “click” noise. If the click is strong and loud, it most likely means the solenoid has enough power and is working properly. If the clicking you are hearing is quiet or repetitive, it may be that your solenoid is not strong enough or does not have enough power from the battery.

How do you fix a golf cart that won't move?

The problem could be with either the Run/Tow switch or Forward/Reverse switch or both. Check the switches to ensure that they aren't stuck midway. If they are, getting them released should help. However, if they show signs of wear and tear, you must get them replaced.

What would cause an electric golf cart not to move?

Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.

Why does my golf cart just click?

This problem occurs if your battery has been overcharged or damaged in ways which cause it to fail to hold a charge. Try to charge the battery to its full capacity and then turn on your cart again. If it does not start, your cart's battery is likely to blame and will need to be properly replaced with a new one.

How do you test a solenoid on a EZ Go golf cart?

This can Also be tested by putting a test lead on each small terminal and pressing the gas pedal. The meter should read 36 V when the gas is pressed. If this voltage does exist when the gas pedal is pressed then the solenoid should click and engage.

How do you troubleshoot a solenoid?

Check if the power supply is correct and the coil can dissipate heat by ventilation. Install a new coil and never power the coil when not mounted on the valve. Check for moisture within and replace if necessary. Replace any damaged or bent armatures as well, and check media compatibility with your valve.

What would cause an electric golf cart not to move?

Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.

What causes a golf cart not to start?

As the main source of power to your electric golf cart, the batteries are commonly the cause for why your electric golf cart won't start. Acid-based batteries are typically used for electric golf carts and must be recharged in order to work properly.

What is a solenoid on a golf cart?

The solenoid on a golf cart, be it gas or electric, is a simple yet critical component, It is often appropriately referred to as the heart of the golf cart. Without getting too complicated, at this stage, it is responsible for transferring power to the vehicle.

Why does my golf cart solenoid not move?

It could be faulty, worn out, or have a loose connection. The contacts could have overheated which not only causes problems and damage but is also a potential danger. If you find that the golf cart solenoid just clicks but does not move it could be one of several issues and more diagnostics will be necessary.

Why is a golf cart important?

A golf cart makes the game more enjoyable and speeds up play. It also allows older people to enjoy the game even if they do not have the fitness to walk the distance. One of the most important components of the cart is the solenoid. It also happens to be the part most likely to give you issues. We take a look at the importance ...

How many times does a solenoid kick in?

An average round could see the solenoid kick in more than 1500 times. We will take you through the signs to look out for if you expect a solenoid issue, how to test the component, how to bypass it if necessary, and other related information that can help you avoid or fix solenoid issues.

Why does my gas cart not engage?

This is often the result of the contacts not releasing. What it does is cause the starter to operate continuously, even when the ignition is in the off position.

Can a golf solenoid cause a golf cart to not work?

It is important to look out for these symptoms and take corrective action when necessary. A faulty solenoid could not only leave you without a functioning golf cart but poses a safety risk.

Do electric golf carts have solenoid issues?

Electric golf carts are also prone to solenoid issues although they are slightly less prevalent than with gas models. When you use the ignition, you expect to hear a click sound. If you do not hear this sound when using the ignition, it is quite likely to be an issue with the solenoid.

What is a solenoid in a golf cart?

A golf cart solenoid is one of the major components of any golf cart. This part is essential regardless whether you own an electric or gas golf cart because both types primarily rely on a solenoid for their movement. What this means is whichever brand or model you choose for your cart, a solenoid is truly an indispensable part of the vehicle.

How to get a golf cart going without a glitch?

To get your golf cart going without a glitch, you most definitely need the solenoid of your cart to be functioning properly. Thus, it goes without saying that you must check this component occasionally to monitor its performance so that you don’t get stranded mid-way.

What is a solenoid wiring diagram?

A solenoid wiring diagram can be very helpful in guiding you about the various connections made to and from the solenoid. This can come in handy when you set out to troubleshoot a problem in your cart on your own. The solenoid wiring diagram is generally very simple, straightforward and self-explanatory.

What does the inductive throttle sensor do on a golf cart?

When you push down the pedal of the golf cart downwards, the inductive throttle sensor sends out the first low power signal to activate the solenoid on its low side and the speed controller. The low side is the steel rod of the solenoid.

How often do solenoids work?

Since solenoids need to work very frequently; turning on and off each time you use the cart, they are prone to wear and tear easily. This is not surprising as they can switch on and off as much as 1,500 times a day). One of the first indications that a solenoid is faulty is when your cart fails to start.

Why is my golf cart not clicking?

This may be because the safety reed switch is not working properly in the charger socket. There could be a loose connection of the MOLEX plug.

What does it mean when your car doesn't start?

If the cart does not start, then it is a clear sign that your solenoid does not have a problem. However, if it does, this does not indicate that the solenoid is the cause of the problem. You will have to check out the complete ignition system.

Where is the solenoid located on a golf cart?

The solenoid is located inside the controller box connected to it.

What happens if a cart starts with a solenoid?

If the cart starts, then the solenoid is the problem and, if it does not, then the problem is not solenoid but something else. A cart owner should remember that bypassing the solenoid can damage the ignition system and central circuit of the cart. Also, bypassing should only be used for checking the solenoid and not permanently.

Why is my Ezgo golf cart not clicking?

A EZGO golf cart that is not making a clicking sound can be due to a failed solenoid. If there is no sound in the cart while igniting the switch, then the problem can be the cart’s control circuitry. This means the solenoid has stopped working. Then it is required to replace the solenoid.

Why is my solenoid overheating?

Using a higher amperage wire for a stock solenoid can cause the solenoid to get overheated. Having a low capacity solenoid in a high capacity or modified cart can be the problem as well. Maybe the wiring is lost or old. High resistance can be one of the issues causing overheating.

How to test gold cart solenoid?

You can test the solenoid by simply disconnecting the main circuit high wires and by using a multimeter.

What to do if your solenoid is damaged?

Here the formula is simple; if one thinks that the solenoid is damaged, then jump the solenoid from the circuit and check. If the cart starts then, the problem could be the solenoid. If the cart doesn’t start even after jumping the solenoid, then the issue lies somewhere else and not in the solenoid.

Why is my cart solenoid getting hot?

If the cart solenoid is getting hot, then the problem can be with the solenoid or the circuit wiring. It is better to check the solenoid thoroughly. Use proper solenoid, which matches the amperage and voltage of the cart system. Use high-quality solenoid to avoid the heating problem.

How to test golf cart solenoid?

A diode allows current to run in one direction, but not in the other. Testing the diode is a simple procedure. Remove the diode from the circuit and check the leads with a continuity tester.

Where are the solenoids on a golf cart?

In all golf carts, new and old, the solenoids can be found under the seat or in the engine well and are easily identifiable by the wires that lead to them. Banks of heavy duty solenoids, as in the previous illustration, are mounted on the side or back panel near the electric motor.

Why doesn't my golf cart solenoid click?

This can be a faulty wire connection, but can also mean the solenoid is beginning to fail. The golf cart solenoid doesn’t click when the accelerator is pressed. This again can be faulty wiring or a failed solenoid.

What to do if your solenoid is not zero?

If the reading is not zero, then the solenoid is stuck and needs to be replaced. If the ohmmeter does read zero, set the cart to forward travel and turn the key switch on. Press the accelerator pedal (or have a friend do it) and you should hear a click. If you don’t hear a click, measure the resistance anyway.

How to check if a battery is low?

First, follow these steps: Step 1 – Check the battery voltage from the positive connection to the battery negative. A solenoid uses 12-18volts and low voltage will not activate the solenoid. Step 2 – If the voltage is low, check the cable ends for corrosion. Clean and charge the battery.

How to tell if solenoid is bad on golf cart?

The common symptom of a bad solenoid is no clicks when the cart’s ignition is on and you press the accelerator.

How to tell if a golf cart won't start?

The first and most obvious symptom is the golf cart won’t start. If it is a gas-powered cart, the engine doesn’t turn over, and if it is an electric cart, the cart doesn’t move. Now, on to the next symptoms…. The engine on the gas-powered cart starts, but the starter doesn’t disengage after starting.

What is a solenoid on a golf cart?

A solenoid, for our purposes, is a type of relay. A relay is a type of switch that uses a low power circuit to operate a high power circuit. A solenoid uses a magnetic coil (the actual solenoid) on a low power circuit to push a rod that closes a high power circuit. On your golf cart, this high powered circuit is either your ignition on ...

Why does my golf cart have no solenoid?

Golf cart solenoids are also typically one of the first components to fail in your golf cart, because they work very hard, turning on and off every time you stop and go in your golf cart. If you have an issue with no start or no go then your solenoid should be pretty high on your list of things to check.

What is a golf cart go switch?

On your golf cart, this high powered circuit is either your ignition on a gas golf cart or your electrical motor power circuit for an electric golf cart. Basically it’s your golf cart’s go switch, and it’s absolutely essential to your golf cart’s ability to do its job. Golf cart solenoids are also typically one of the first components ...

What happens if a solenoid reads infinity?

If it reads infinity or open lead, then the solenoid has an internal fault and requires replacement. Your solenoid should also have a range that it operates in, and if the resistance reads outside of that range, you should replace the solenoid even if it works to avoid damaging other components.

What is the most important part of a golf cart?

One of the most important components of your golf cart is the solenoid. It is one of the main components of your golf cart that allows it to move. Whether you have a Yamaha, E-Z-GO, or Club Car golf cart, and no matter if it is an electric or gas golf cart, you need a properly operating solenoid to get anywhere. Contents [ show]

What to do if your solenoid doesn't work?

Before you run out and get a solenoid, you’ll have to test the entire ignition system this way to find out what’s not working, and it is a bit of a pain.

What is a micro switch on a gas pedal?

This switch is what sends the low power to the solenoid. The solenoid uses this to create a circuit between the battery and the starter, thus starting your motor and getting you grooving.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9