How to test for nail grooves?
How to keep your golf clubs from wearing out?
How to tell if a wedge is bad?
Why does my fingernail run smoothly?
See more
About this website
How do I check my groove wedge?
To do the test, simply run your fingernail down the face of your wedge to see if your nail gets caught in each groove. If your fingernail runs smoothly across any grooves, it's probably because they're worn and it's time for a switch.
How do I know if I have Ping Eye 2 square grooves?
All Ping clubs manufactured up to 2010 have been manufactured with square grooves. The PING logo is present on the rear of the iron along with the club make, manufacturer Karsten's name and serial number. Ping clubs include: The G10, V2 Rapture, i10, S57, S59, Rhapsody, G5, Zing, Eye 2 and the Eye 2+.
Are Vokey wedges U or V grooves?
Vokey SM8 wedges feature the Spin Milled Grooves. The reason these grooves are so good for golfers is that they go through an impressive manufacturing process, and then, they hold up quite well over time.
What are the grooves on a golf club called?
The deeper, sharper grooves are called "U" grooves. "V" grooves are the opposite. They are much shallower and have rounder edges. The "U" groove can move much more debris away from the contact zone.
Why is the Ping Eye 2 wedge banned?
The uproar resulted in the PGA Tour issuing a statement that included, "Because the use of pre-1990 Ping Eye 2 irons is permitted for play, public comments or criticisms characterizing their use as a violation of the Rules of Golf as promulgated by the USGA are inappropriate at best."
Should you sharpen your iron grooves?
The grooves on your golf club are vital to both backspin and ball control on the golf course. Sharpening the grooves may be something that you have never considered doing before - but worn down grooves will not give you the control or backspin you're looking for.
Do deeper grooves create more spin?
Just like the tread of a tyre generates grip on the road each groove of a golf club grabs the ball to create spin. And just like the design of tyres where the depth of the tread is directly linked to increased grip golf wedges were historically designed with deep grooves to create more backspin.
Are U shaped grooves legal?
Golf club manufacturers can continue to make clubs with grooves shaped like a “V”, a “U” or “square”. The USGA Rules have previously allowed, and will continue to allow, for a series of “straight grooves” with diverging sides and a symmetrical cross-section.
Are groove sharpeners legal?
Are golf groove sharpeners legal? While it is perfectly legal to use a golf groove sharpener, your modified club must still comply with the rules of the game regarding golf groove alignment, depth and spacing.
What grooves are illegal in golf?
Under United States Golf Association (USGA) rules implemented on January 1, square or U-grooves have been outlawed but a 20-year-old Ping wedge was deemed legal because of a lawsuit won by its manufacturer over the USGA in 1990.
What year were square grooves banned?
1990Saying that the use of square or U grooves in golf irons ''has changed the nature of the game,'' the PGA Tour Policy Board today declared clubs with square grooves illegal for use in PGA Tour events starting Jan. 1, 1990.
Why are square grooves illegal?
Square grooves were briefly banned from the PGA tour, due solely to a PGA rule that had nothing to do with the legality of the clubs themselves. Depending on which study you believe, square grooves provide no competitive advantage, or they provide slightly higher spin rates from the rough.
Do Ping Eye 2 Plus irons have square grooves?
Please note: Ping Eye 2 Plus irons were made after 1990 and do not have the square grooves.
How do I know if I have Ping Eye 2 Plus No Plus?
1:094:481990 Ping Eye 2 Plus + The Vintage Golfer - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf that inner cavity hits this top line and there's a straight line right here that's the originalMoreIf that inner cavity hits this top line and there's a straight line right here that's the original ping I - if there's an oval here as this one without the plus that's the ping i2.
How can I tell how old my Ping irons are?
Contact the Ping Consumer Relations Department by phone at (800) 474-6434 or through an online contact form available on the company's website. Provide the serial number to the representative, who will be able to find the manufacturing date and any other specifics regarding the club.
What year is my Ping Eye 2?
Ping Eye 2 – Released 1982.
Wedge Grooves: How Long Can Your Wedge Stay Alive?
Looking down at your brand new wedge is a great feeling. Except when the thought hits you, how long are these grooves going to last ... Read moreWedge Grooves: How Long Can Your Wedge Stay Alive?
Sharpening Your Grooves - Frankly Golf
Sharpening Your Grooves . Do groove sharpeners really work? I see a variety of them offered on the Internet and wondered if they would really sharpen up my grooves without damaging the face of the club.
How to test for nail grooves?
To do the test, simply run your fingernail down the face of your wedge to see if your nail gets caught in each groove. If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch. 2. Do regular checkups.
How to keep your golf clubs from wearing out?
1. Learn the fingernail test 2. Do regular checkups 3.
How to tell if a wedge is bad?
To do the test, simply run your fingernail down the face of your wedge to see if your nail gets caught in each groove. If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch.
Why does my fingernail run smoothly?
If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch. 2. Do regular checkups. Jonathan Wall, Managing Equipment Editor: The fingernail test is most definitely the easiest way to determine if your wedge grooves are starting to go.
What are grooves on golf clubs?
By Don Patton. Grooves on your golf clubs primarily are designed to create spin when the ball is struck properly. Grooves on golf club faces are there primarily to impart spin to the ball. They also channel water and foreign material away from the clubface, especially for shots from heavy rough. The larger grooves on some irons allow players ...
Why do golf clubs have grooves?
Grooves on golf club faces are there primarily to impart spin to the ball. They also channel water and foreign material away from the clubface, especially for shots from heavy rough.
How wide is a clubface groove?
The cross section may be U- or V-shaped as long as it is symmetrical and the sides don’t converge or have sharp or raised edges. The dimensions of each groove are limited to 0.035 inch wide and 0.020 inch deep. The required minimum spacing is three times the groove width and no less than .075 inch.
Why are there grooves on irons?
The larger grooves on some irons allow players to be less concerned about the rough, making driving accuracy less important . For this reason the USGA implemented a set of rules changes in 2010 that tightened the limits on groove dimensions.
When did golf clubs become tighter?
Professional golfers already began using clubs that conform to the new rules in 2010. By 2011 all newly manufactured clubs must conform to the tighter standards although retailers can sell existing stock until it is gone. Amateurs may continue using their existing equipment, but beginning in 2014 the new rules will apply to USGA and NCAA competitions, and in 2024 everyone’s equipment must meet the new restrictions.
How much less spin on golf shots?
This means 30 percent to 50 percent less spin on shots hit from the rough with very little effect on fairway shots.
How to tell if a wedge is bad?
To do the test, simply run your fingernail down the face of your wedge to see if your nail gets caught in each groove. If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch.
Why does my fingernail run smoothly?
If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch. 2. Do regular checkups. Jonathan Wall, Managing Equipment Editor: The fingernail test is most definitely the easiest way to determine if your wedge grooves are starting to go.
Why are grooves important in golf clubs?
Why are golf club grooves important? The grooves are designed to allow water to flow and clean specks of dirt. This was the primary reason behind golf club grooves. Which ultimately helps to have better control even in wet conditions.
What is groove in golf?
In a golf club, grooves are the deep notch on the clubface to allow more control and spin on each swing. The grooves on a golf club can be both horizontal and parallel. Not just the spin, the groove is vital for a better chip shot or lofted shot as well.
How to sharpen a groove?
Things you will require in this process: 1 Brush (a toothbrush is recommended) 2 Liquid Dish Detergent 3 Warm Water 4 Lubricant 5 Masking tape 6 And last but not least, a groove sharpening tool.
How to clean a golf club with a toothbrush?
First thing first. Make some soapy water by putting some liquid detergent in the warm water and mixing it. Dip your golf club in soapy water and remove the dirt using a brush. You can use a scrubbing brush or toothbrush. You may even use a toothpick to replace a toothbrush, but that would take more time to clean.
How to cover a flat club face?
Cover the flat area of the clubface with masking tape
Should you sharpen golf clubs?
So, should you sharpen your grooves? The answer is yes and regularly. Scroll down to learn the process of sharpening.
Can you play golf without grooves?
Yes, without grooves on the clubs, it would have been challenging to generate spin, especially backspin, and control the ball while hitting. But this is not the primary reason behind grooves. Image Source: deolauto.ca. As mentioned earlier, grooves on golf clubs are as important as having treads in tires. A flat tire has a higher possibility of ...
What happens when grass juice gets between the clubface and the ball?
It is only when grass juice gets between the clubface and the ball that the grooves really start doing their thing. This only happens out of relatively light rough not the real juicy 4” stuff where it doesn’t matter what type of grooves or condition of those grooves makes any difference.
How long does it take to recondition a golf club?
First, don’t try to recondition it yourself. Second, to get it done professionally may take up to six weeks depending on whether the club head is chrome plated or not. Most forged iron clubs made of mild steel, will need to be protected from rusting, which requires a layer of chrome to be deposited on the head after the grooves have been milled, rolled or stamped into the face. Some clubs are forged but made of stainless steel, which do not require chrome plating. These, as with most cast clubs can be re-grooved and do not need the additional protective layer of chrome.
Can a hand held tool be used to measure grooves?
A hand held tool will not only do a number on the grooves but will most likely render them non-conforming because of the tight specifications the USGA has for grooves, i.e. depth, width, ratio of groove-width to pitch, radius of groove edges and even groove straightness.
Can you use a golf club without penalty?
This means for example, even though the face is concave or the grip has indentations for you fingers because this is how it wore down through normal use, it is OK to use it without penalty but as soon as you start reconditioning the club it must be considered new.
Can you recondition a wedge with a hand held groove tool?
First, let me say that using a hand-held groove tool is a risky way to recondition the grooves in your wedges. The reason is that as soon as you alter (recondition) the face of the club it is considered new and ruled on accordingly.
How to test for nail grooves?
To do the test, simply run your fingernail down the face of your wedge to see if your nail gets caught in each groove. If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch. 2. Do regular checkups.
How to keep your golf clubs from wearing out?
1. Learn the fingernail test 2. Do regular checkups 3.
How to tell if a wedge is bad?
To do the test, simply run your fingernail down the face of your wedge to see if your nail gets caught in each groove. If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch.
Why does my fingernail run smoothly?
If your fingernail runs smoothly across any grooves, it’s probably because they’re worn and it’s time for a switch. 2. Do regular checkups. Jonathan Wall, Managing Equipment Editor: The fingernail test is most definitely the easiest way to determine if your wedge grooves are starting to go.
