Most stickers on authentic clubs are placed on the underside of the shaft up by the grip or down next to the ferrule. Counterfeit clubs usually have this sticker near the shaft band on the top of the shaft so it is easily visible. They figure it will make it look more authentic I suppose.
Full Answer
What is the difference between the X100 and S400 shafts?
The X100 weighs 121 grams and the S400 weighs 134 grams. All other aspects of each shaft, like the flex and launch angle are the same between the two shafts. The main difference between the X100 and S400 shaft is the weight. The X100 weighs about 121 grams and the S400 weighs about 134 grams.
How can I tell if a shaft is real or fake?
The colors may be off on the shaft bands or the graphics if the club has a graphite shaft. Check out our counterfeit Titleist AP2 Iron Set Post as an example of counterfeit Project X steel shafts.
How can you tell if a golf club is real?
Most stickers on authentic clubs are placed on the underside of the shaft up by the grip or down next to the ferrule. Counterfeit clubs usually have this sticker near the shaft band on the top of the shaft so it is easily visible.
Is the S400 stiffer than the S300?
s300 Vs s400 1 Is s400 Stiffer Than s300. Comparing the dynamic gold s300 vs. s400, some golfers may say that the s400 is stiffer than the s300. 2 Key Differences Between Both Shafts. There are a few differences to note between the two shafts. ... 3 Does Iron Shaft Flex Make A Difference. Flex comes down to the way the club is swung. ...
Shaft Weight: X100 vs S400
The main difference between the X100 and S400 shaft is the weight. The X100 weighs about 121 grams and the S400 weighs about 134 grams. That means there is 13 grams difference between these two shafts, pretty substantial.
Flex: X100 vs S400
One of the many similarities between these shafts is that they have the same amount of flex, X-Stiff. An X-Stiff shaft is meant for players who have higher clubhead speeds. If you don’t have high swing speed, then it might play a bit more rigid than other shafts.
Launch Angle: X100 vs S400
Another similarity between these two shafts is the launch angle. They are both designed with low launch angles, meaning that the ball will have a low arc. In other words they are designed to get more distance than height.
Are The X100 and S400 Legal?
Both the Golden Dynamic X100 and S400 shafts are legal according to the USGA and R&A. Each shaft conforms to the standards and regulations put in place by each of these governing bodies. This means that they are fine to use in casual, high-level amateur, and professional rounds and tournaments.
Final Thoughts: S400 vs X100
So, now you should have a better idea as to which shaft is better for you. Generally speaking, both of these shafts are quite similar, the main difference being that the S400 is better for those with slightly higher swing speeds.
How much does a S300 shaft weigh?
Key Differences Between Both Shafts. There are a few differences to note between the two shafts. The s300 shaft flex weight is 130 grams and has more flex than the s400 (supposedly), although most golfers can’t notice the difference. s300. Weighs 130 grams.
What is the most important factor when selecting a golf shaft?
When determining the proper shaft for a player, the most important factor is the fit , which means the length and weight given the golfer’s body size.
What is a true temper dynamic gold shaft?
True Temper Dynamic Gold s300 is the standard stiffness and flex for golf shafts. It is not the only one, but it is the median shaft construction and is the standard by which every other shaft is compared.
When was the S300 shaft updated?
Published By Lawrence Smelser Last Updated on May 10, 2021 by Editorial Staff. Many golfers have communicated confusion around the topic of the s300 and s400 shafts.
How many grams are in a shaft?
Meaning a shaft that was meant to be 130 grams weighs in at 132 grams, so it is sold as a shaft meant to be 134 grams.
Is the S400 the same as the S300?
Others will say they are the same stiffness, and the only noticeable difference is in the weight. The s400 is meant to be slightly stiffer, but the difference is tough to pick up on. A golfer may notice that the s300 has a somewhat softer feel than s400. One crucial factor to note is that shafts are often weight sorted, but sometimes not precisely.
Is a stiff iron shaft better than a stiff shaft?
However, when tested, regular shaft flexes performed as good or better than stiff shafts. Irons naturally have stiffer shafts since they are shorter. A more rigid shaft may be a little more abrupt in the hands while having slightly more flex can aid to a softer feel.
What happens if you buy counterfeit golf clubs?
Counterfeit clubs can result in anything from a loss of distance and accuracy, to safety hazards – with shafts that shatter and heads that fly off mid-swing. Some golfers look online and see what they think are top of the line clubs at bottom barrel prices so they buy them.
Is fake golf clubs a quality issue?
It’s an honesty issue, it’s a quality issue, and in some cases, it’s a safety issue. For the good of customers and for the good of the game, the group is committed to putting an end to these fakes — because fake clubs are for fake golfers.
Is it possible to counterfeit a product?
There will always be a risk that a product purchased from an unauthorized source will be counterfeit. The truth is: counterfeit manufacturers are constantly changing, and it’s becoming more difficult to spot fakes – until you play with them.
Is Scotty Cameron a counterfeit?
Scroll through to see if you can identify which of these products are counterfeits. Scotty Cameron Putters. Scotty Cameron putters are frequently counterfeited. In this case, shoddy paint jobs and poor engraving are two indicators of these fake products. Both putters are counterfeits. Callaway Drivers.
odshot68
I like the SW of S400 shafts but wonder if they are too stiff for wedges. I see a lot of pros using these but they play X flex in their irons and their wedge shafts are softer with the S400. I play C-taper Stiff in my irons and wonder if I should be using something different. I don't like anything with a active/soft tip. Any thoughts?
keith723
S400 are the stock shafts in my Nike VR Forged Black wedges and I play S300 in my irons - I honestly can't tell the difference between them...I came from playing Cally X-Forged wedges and they had S300.
GooseHook
In your standard .355 taper, the difference between S300 and S400 is [b]2 grams. [/b]The difference between S400 and S200 is only 3 grams. This is pretty much negligible.
onetime19
I removed the S200 and installed a S400 in my sm4 52, really can't tell a world of difference.
odshot68
Obviously the weight is neglible. Then do you feel your wedges should be softer in flex than your iron shafts?
odshot68
The shaft I considered would be the KBS wedge shaft (not spinner). Can anyone compare that to an S400?
Pitchswag
I play X100 Tour Issue in all my irons, including my 48°, 54° and 60°. To me "spinner shafts" in wedges are publicized nonsense, and I have no problem with creating enough spin for every shot.