How are golf shafts manufactured?
The manufacture of golf shafts depends upon the type of material that is being used. Steel shafts are either pulled or rolled and welded. Graphite shafts are made with multiple layers of material wrapped around a mandrel.
How to pick the right golf shafts?
How to Pick the Right Golf Shaft Step 1. Choose between graphite and steel shafts. When they were first introduced, graphite shafts were meant for... Step 2. Pick shafts whose flex is right for your swing. Simply, flex refers to the amount a shaft will bend while you... Step 3. Factor in the weight, ...
What is a golf shaft and why is it important?
When it comes to performance the golf shaft has been referred to as the transmission of the golf club. The flex, length, and weight can all effect how you are hitting a golf ball. In fact, the correct shaft can help any golfer hit the ball straighter and farther.
What is the most important factor when buying a shaft?
The most important factor when buying a shaft is the flex because it affects your distance and direction. In essence flex is the ability of a golf shaft to bend during the golf swing. For example if you have a slow golf swing then you need a shaft with greater flex, and vice versa if your swing is extremely fast then you need a (Extra Stiff) shaft.
How are golf shafts manufactured?
1:3414:05How are Golf Shafts Made? - YouTubeYouTubeStart of suggested clipEnd of suggested clipProcess each flag is rolled onto the steel mandrel by hand depending on the shaft there's anywhereMoreProcess each flag is rolled onto the steel mandrel by hand depending on the shaft there's anywhere from a seven to nineteen Flags. Once the flags been rolled onto the band rolls.
Does golf shaft brand matter?
There Are No Standards. One of the biggest misconceptions about shafts is that there are standards out there that manufacturers adhere to. Most golfers assume that a shaft marked regular or stiff will be the same across the board, no matter who they buy it from. Unfortunately, this couldn't be further from the truth.
Are expensive golf shafts worth it?
Because of the material and production differences, there's usually a price tag difference as well. While they may look identical on the outside, the aftermarket version of a shaft is housing better performance and for most golfers, that's worth a slight increase in cost.
What is the most popular driver shaft on tour?
Fujikura driver shafts are the most used by the top 100 PGA Tour players with 28 players using them including Justin Thomas, Jordan Speith, Dustin Johnson, Rory McIlroy, Scottie Scheffler and Louis Oosthuizen. The Ventus Blue 6X and Ventus Black 6X shafts are the most popular individual driver shafts.
What shaft flex do pros use?
90% of the top 100 PGA Tour pros use extra stiff or Tour extra stiff flex shafts in their driver. As a whole pro players of woods, hybrids and utility irons again use extra stiff or Tour extra stiff shafts with stiff and stiff+ flex shafts only being more used in irons and wedges.
Do any pros use regular flex shafts?
Kramer's 2006 “Golf Magazine” article cites a survey showing that just 2 percent of PGA Tour players and 10 percent of PGA Champions Tour players used regular flex shafts in their irons. He also notes that PGA Tour swing speeds average 110 mph, so the players favor a stiffer shaft to better control the club.
Why is Pxg so expensive?
Although these clubs have the technology and performance to justify the pricing, you will find that a major reason they are expensive is simply that they are designed to be. From the start, this was meant to be a designer high-end premium brand.
What is an OEM shaft?
"In the golf industry, the term OEM is used to describe any golf club that has been built by a company to sell as a standard-made, finished golf club, bought off-the-rack in a retail golf store, pro shop or internet golf retail company."
What is the most expensive golf shaft?
The story behind Seven Dreamers Laboratories and its $1200 golf shaft. Is $1200 a lot for a golf shaft? It sounds like a lot, particularly for an entry-level model.
What degree driver do most pros use?
Professional golfers tend to play with a driver that has about 9.5 degrees of loft. Of course, there are some golfers who find 10.5 or 8.5 to be more effective, but you will generally see most players end up in the 9 to 9.5 range. The loft on the driver makes it easier to launch.
What swing speed requires a stiff shaft?
between 97 and 104 mphStiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall.
What shaft does Tiger Woods use?
Mitsubishi Diamana D+ 60 TXTiger has a Mitsubishi Diamana D+ 60 TX shaft fitted to his driver.
Why is shaft length important in golf?
An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.
What weight shafts are available for clubfitters?
Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.
What is carbon fiber shaft?
Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance. Carbon fiber offers increased flex, greater clubhead speed, but reduced accuracy, due to more torque. It also dissipates the stinging shock from a poorly struck shot and will protect the hands and wrist.
What is flex in golf?
Flex. Put very simply, flex is the amount of bend in the shaft. It affects launch angle, spin, ball flight, control, carries, and distance. Shafts are qualified in different ways but reference to flex is the most important. Powerful swings require stiffer shafts which put less load on the shaft.
What happens if you don't have a stiff shaft?
The result is a loss of distance. Added to this the direction control will be lost.
When did steel shafts become legal?
Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.
Is there a real standard for shafts in golf?
It is accepted within the golf industry that there are no real standards when it comes to shaft manufacture and the different properties they all claim to have.
What is a golf shaft?
When it comes to performance the golf shaft has been referred to as the transmission of the golf club. The flex, length, and weight can all effect how you are hitting a golf ball. In fact, the correct shaft can help any golfer hit the ball straighter and farther. Take a closer look at the different types of shafts usually offered, and find the one that’s best for your swing.
What shafts are best for a senior golfer?
With greater swing speeds and flex you will lose some accuracy with the club. Graphite shafts are best suited for senior golfers and lady golfers who cannot produce a lot of swing speed.
Why is flex important in golf?
Flex. The most important factor when buying a shaft is the flex because it affects your distance and direction. In essence flex is the ability of a golf shaft to bend during the golf swing.
What is a golf shaft made of?
Steel shafts are either pulled or rolled and welded. Graphite shafts are made with multiple layers of material wrapped around a mandrel.
How are graphite shafts made?
Graphite shafts are manufactured by wrapping sheets of graphite composite material around a steel mandrel. The composite sheets are cut into various sizes and shapes depending upon the design of the shaft. These cut portions are called flags.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
What are the different types of golf shafts?
There are two basic types of golf shafts: steel and graphite. Often, your club will have been originally assembled with either of these types of shafts, however if you decide that you would like to change your type of shaft, you should know the difference between each shaft type. There are some newer options that combine the two materials, ...
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
What is the kick point of a golf shot?
The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable.
Who makes Cobra golf clubs?
They are endorsed by Tiger Woods, Rory Mcllroy, John Rahm, and other world number one golfers, and TaylorMade supplies these pros with quality equipment so they can keep their competitive edge. Yet another native to Carlsbad, CA, Cobra Golf is a manufacturer of golf clubs and a subsidiary of the German Puma company.
Where are Yonex golf clubs made?
Yonex, of Tokyo, Japan, is a Japanese sports equipment manufacturer for sports such as tennis, badminton, golf, and running. Their golf clubs are built with stringent technological standards, making them one of the best quality club brands for players looking for cutting edge equipment. Acushnet Holdings Corporation is a designer, manufacturer, ...
What is Taylormade Golf?
TaylorMade Golf Company, also of Carlsbad, CA, is a manufacturer of sports equipment and subsidiary of the larger Adidas company. TaylorMade focuses on quality golf clubs, balls, and clothing, with their most famous innovation being their metal driver which still dominates the market.
What is a golf club?
Golf clubs are much more than wedges on sticks; they are pieces of engineered sporting equipment that can have a massive effect on one’s game. There are numerous types of golf clubs available such as woods, wedges, irons, drivers, putters, and hybrids, each intended for specific use at various stages ...
What is ping golf?
Ping, of Phoenix, AR is an American based sports equipment manufacturer, specializing in golf equipment, bags, and clubs. They are the first golf club manufacturer to use investment casting, which reduces costs, increases manufacturing control, and allows Ping to custom fit clubs to a player’s unique style.
Where is Callaway Golf based?
They are proud to be endorsed by pro golfers such as Phil Mickelson, Xander Schauffele, and celebrity Justin Timberlake, and are based out of Carlsbad, CA.
Who invented grooved wedges?
Roger Cleveland, the founder of the company, was the first to market grooved wedges, 460cc drivers, and other golf club innovations, and is responsible for making some of the best woods and wedges in the game of golf.
How many yards can you add with a golf club shaft?
To set the record straight, with the right shafts, you could add an additional 20 to 25 yards to your game as well as improve your accuracy.
What does flex mean in golf?
Simply, flex refers to the amount a shaft will bend while you swing. If you choose the wrong flex, the club head will not hit the ball squarely which will have an impact on your distance and the trajectory of the golf ball. Although there are no standards established, there are 5 different levels of flex: Ladies, Senior, Regular, ...
Can you swing a golf club with a lighter shaft?
The weight of a club is a matter of preference. Generally, you can swing a club with a lighter shaft faster, thereby increasing your distance. But you most likely will sacrifice some accuracy. Length is also a personal matter, and clubs with longer shafts generally hit the ball further. But clubs with shorter shafts are easier to hit ...
What does the shaft do in golf?
Having the right shaft in your golf clubs makes a world of difference to your game. The shaft affects club performance on everything from spin, launch, and speed. The wrong shaft could cause the ball to launch too high or too low as well as spin too much and cause you to lose distance.
What are the characteristics of a golf shaft?
Golfers often want to know about the three main characteristics of a golf shaft: weight, kick point, and torque. In this video, you will learn how these three specs are actually connected and how they affect each other.
RETAIL PROFIT
Depending on purchasing power and OEM incentives, dealer costs on the $500 driver are generally between $325 and $360. Some manufacturers offer volume discounts that boost retail margins, but to qualify, as the phrase volume discount implies, the retailer has to take on additional inventory.
OEM PROFIT
OEM’s want to get 45-60 points on each driver to help cover their operational costs. In this scenario that works out to something in the $175-$240 (sometimes a bit more) range per driver.
WHAT YOU SHOULD BE THINKING ABOUT NOW
There’s always going to be a cost for raw materials and production and If/when costs go up because materials become more exotic (carbon crowns, movable weights, etc.) or costs of production increase (more intricate designs and more expensive tooling), expect the retail cost to go up by at least the same amount, because neither the manufacturer nor the retailer is going shoulder that cost and let it eat into their profits.
