The steps in adjusting the brakes are as follows: Sit on the driver’s seat Run the golf cart and accelerate up to its full speed but ensure that you have enough road space. Once the cart is running full speed, step on the brakes.
How to adjust the brakes on a golf cart?
Before starting the brake adjustment, disconnect the battery or the battery pack of the golf cart and prepare the necessary tools such as floor jack, bricks or blocks, wrench and so forth. Some of the old style golf carts may have run/low switches. These switches should be shifted to the tow position before disconnecting their battery packs.
How do you adjust the rear brake shoes?
If the brake shoes are adjusted manually, you need to return the drum to the axle. Then turn the star or adjuster screw until the drum is locked up. After which, you have to back the adjuster off about 3 to 5 clicks which should induce the drum to turn freely.
How do the brakes work on an E-Z-GO golf cart?
The brakes in an E-Z-GO golf cart are automatically adjusted by its mechanical rear drum braking system depending on the wear of the brake shoe. This is done while the golf cart is running.
How do you adjust the travel of brake fluid?
You can adjust the brake fluid travel by loosening the nut and then rotating the spherical nut. The nuts need to be properly torqued at 10 to 11 ft.-lbs. or 14 – 15 Nm. The ideal setting for the brake fluid travel is from 7/8 inch to 1 and 1/8 inches or 2.2 to 2.9 cm.
How to adjust brakes on a golf cart?
Here are the steps in adjusting the brakes: Turn off the power of the golf cart. Don’t set its parking brake. Put the brick or blocks in front and behind each of the front wheel of the golf cart to prevent it from rolling. Get the floor jack into position at the rear of the golf cart.
Why is it important to adjust the distance of travel on a golf cart?
It is important to adjust this distance of travel to make sure that the brakes are working properly. If there is too much travel distance, the braking capacity or power of the golf cart will be reduced. But if the distance is too short, the brakes may not release fully. So adjustments are necessary in both cases.
How to remove lug nuts on a car?
Use the socket wrench to loosen the lug nuts on the rear wheels. Remove the nuts and the wheels and set them aside. Remove the rubber boots on the underside of the wheels and the brake adjustment screw will be exposed. Pull these rubber boots away from the wheels by using your hands.
Do golf carts have brakes?
As in ordinary vehicles, golf carts have brakes. If you notice that the brakes are not functioning well, they need to be adjusted. Here are some of the ways by which you can adjust the brakes of different types of golf carts. This is also part of the golf cart maintenance checklist that we’ve created. Contents [ show]
Is it safe to drive a golf cart?
Just like any vehicle, safety is very important in driving a golf cart. If not properly handled a golf cart could also cause accidents, although not as serious as the accidents caused by bigger cars and trucks. Nevertheless, you should also know how to safely drive and operate a golf cart. As in ordinary vehicles, golf carts have brakes.
Do old golf carts have low switches?
Some of the old style golf carts may have run/low switches. These switches should be shifted to the tow position before disconnecting their battery packs. Lift the back of the golf cart and put the floor jack in a secure section of the cart which should provide it a stable support.