Length is one factor in determining the type of shaft you need. There are three elements to consider when you are about to change the shafts in your golf clubs. They are the length, the amount of flex (stiffness of the shafts) and the materials that comprise them.
Full Answer
What should I look for when buying a golf shaft?
A simple rule of thumb to remember when buying a shaft is a high kick point rating means low ball trajectory. Low kick point means higher ball flight trajectory. It also may feel like the club is “whipping” during the swing while a high kick point will feel more solid and stiff. Should I Buy Steel, Graphite, or Which Type of Shaft Material?
How do I determine the length of my club shafts?
In order to determine the length of your club, stand tall and get someone to measure from the crease where your wrist and hand meet to the floor. Do this with both hands and take an average of the two measurements. The following lists what length of shafts you should consider for certain heights.
Can you fit a golfer into the right shafts online?
Fitting a golfer into the exact right shaft for them over the internet is a tall, if not impossible, task. All driver swings are different, and there are so many options on the current market.
What do the numbers on golf shafts mean?
When buying a golf shaft, you’ll see many different numbers in the name of the shaft. For example: These numbers are the weight of the shaft in grams. Shaft weights typically range between 50 grams and 85 grams with the 50-60 numbers being pretty common as seen in the example shafts above.
How to determine shaft length?
What are the elements to consider when changing golf clubs?
Why use graphite shafts?
How many flexes are there for graphite shafts?
What should shafts be based on?
Do all golf clubs have to be steel?
See more
About this website
How do I know if a shaft will fit my driver?
5 factors to help you find the right driver shaft for your swingFlex. Generally speaking, a driver shaft that's too stiff will cause shots to launch too low, with too little spin and low peak heights. ... Weight. The weight of a shaft has a similar correlation to performance as flex. ... Length. ... Kick point. ... Torque.
Do all golf shafts fit all heads?
Yes, most golf Driver shafts are interchangeable. Golf driver shafts can be replaced as long as the new shaft is the same length and made by the same brand of golf club.
How do I know what golf shaft is right for me?
Put simply, the higher the rating, the more the shaft is prone to twisting. It is the torque that also determines how the shaft feels to every player, which means that the higher the rating, the softer the shaft will feel. A shaft with a 3-degree torque will feel much stiffer than a 5-degree torque, for example.
Can you put a new shaft on a golf club?
Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
Does any golf shaft fit any driver?
The answer is straightforward: it's capacity to fit with any club head. As a result, whatever golf club preference you have; a wedge, woods, hybrids, or putters, you can ensure that the golf shaft you are comfortable with can go with you in the game.
What is a golf club shaft adapter?
Shaft Adapter Sleeves allow you to mount or change the heads on your shafts. The shaft adapter is usually used on drivers or woods but can be used on the golf club shaft of your choice.
What shaft is best for my swing speed?
In general, golfers with driver swing speeds over 95 mph should play stiff flex shafts, and those under 95 mph should play regular flex. Shafts also come in extra stiff (105+ mph) and senior flex (under 85 mph).
Will I lose distance with a stiff shaft?
If the shaft flex is too stiff, your average distance will remain low.
Who should use senior flex golf shafts?
Senior flex shafts are appropriate for golfers who swing between 75 and 90 mph and carry a driver about 180 to 200 yards. Regular flex shafts are designed for golfers who swing 90 to 100 mph and carry a driver about 200 to 240 yards.
Can I change the shafts in my irons?
If you're thinking about changing the shafts on your golf clubs, you can either do them yourself or take them to your local golf shop.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
How much does it cost to re shaft a golf club?
Choosing to have your clubs reshafted at the local country club may be a bit more expensive than a small golf club repair center. Depending on where you go and how many clubs you need re shafted you could be looking at anywhere from $15 to $100 in labor.
How to determine shaft length?
Factor in such things as your height, the length of your arms and your type of swing to determine the length of your shafts. As an example, you may be tall but you also have long arms, so you may not need longer shafts. Also, if you tend to grip down on all of your golf shots, you might consider shortening your shafts slightly. After consulting a shaft length chart (see References), make final adjustments based on your style of play and your height.
What are the elements to consider when changing golf clubs?
They are the length, the amount of flex (stiffness of the shafts) and the materials that comprise them .
Why use graphite shafts?
Choose graphite shafts because, being lighter, they are easier to swing faster; this will translate into greater distance. However, if you are a low handicapper, you may place a premium on being able to feel your shots more with steel shafts, particularly with your irons.
How many flexes are there for graphite shafts?
Choose the proper flex; there are five for both graphite and steel shafts. They are Ladies, Seniors, Regular, Stiff and Extra-stiff. If you don't have the help of a professional club fitter, you can determine which flex you should have by how far your drives carry in the air.
What should shafts be based on?
Furthermore, you should choose shafts that are based on your physical stature and the status of your game. If you choose the right shafts, you will soon see your game improve and your love of the game strengthen.
Do all golf clubs have to be steel?
Step 4. Understand that all your golf clubs do not have to be either graphite or steel. In fact, they should vary depending on how you hit a particular club and what you are trying to do with it. For example, you could have graphite shafts in your driver and hybrid clubs to give you greater distance, and steel shafts in your irons ...
What happens if your golf shaft is too light?
A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver since it is the longest club in your bag.
What does playing the right length driver shaft do?
Playing the right length Driver Shaft will increase your accuracy!
What is a tip stiff shaft?
Some shafts are ‘tip-stiff’, meaning the tip section near the clubhead is stiffer in relation to the rest of the shaft. Or ‘grip-stiff’ which keeps the upper end of the shaft firm to help reduce spin.
Why do you need torquing shafts for a high speed swing?
It is very helpful for your miss-hits and for when you make a bad swing. If you’re swinging badly at a high velocity then you need all the help you can get to keep the face as square to the ball as possible.
What is torque in golf?
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
How much does a driver shaft cost?
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
What is a bend profile?
The bend profile takes into account how your entire shaft kicks. Not just the location of one spot. With today’s technology, custom club makers can adjust the shaft at any place. There is no excuse to have the wrong shaft.
What does the shaft do in golf?
Having the right shaft in your golf clubs makes a world of difference to your game. The shaft affects club performance on everything from spin, launch, and speed. The wrong shaft could cause the ball to launch too high or too low as well as spin too much and cause you to lose distance.
How can the right golf shaft and Flex improve my game?
Golfers often want to know just how the right shaft and flex can help their game. In these videos, you’ll learn how flex works with your swing and the improvements the right shaft and flex can make for you out on the golf course.
What Materials are Shafts Made of?
In our first video, you’ll learn about the different type of shaft materials and how each can affect your game. Find out the three types of golf shafts, the benefits of each one, and see which type best fits your game in this video.
What about weight, kick point, and torque?
Golfers often want to know about the three main characteristics of a golf shaft: weight, kick point, and torque. In this video, you will learn how these three specs are actually connected and how they affect each other.
Can you get custom golf clubs from TGW?
Now that you have learned a few things about picking the right golf shaft, it’s time to get your clubs customized to help you play your best! At TGW, we have an incredible selection of custom golf clubs. All of our custom golf clubs are built by the manufacturers so you can trust you are getting the best possible club for your game. Start shooting lower scores and see the difference the right golf shaft can make in your game today.
Why do golfers buy shafts?
The problem is that buying a shaft because someone else uses it is like buying a size 44-long jacket because that’s what Tiger wears. It can be counterproductive to your game to purchase a shaft that isn’t right for you.
What happens if you have a longer shaft?
As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel. A shorter shaft, on the other hand, will cause a more consistent strike pattern, but impact location will tend to be on the toe. A golfer’s physical size, arm length, swing speed, consistency, ...
What does low torque mean on a shaft?
5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.
What shafts do you need for a slow swing?
Slow swing speeds will generally require softer-flex shafts, while high swing speeds need stiffer shafts; due to variations in swing patterns, however, swing speed is only one portion of finding the right shaft. Briand’s recommendation is to use your current driver shaft as a baseline.
What happens if your driver shaft is too stiff?
Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights. A shaft that’s too weak, on the other hand, may cause shots to spin too much, fly too high, and widen dispersion patterns.
How many inches is Rickie Fowler's shaft?
A look at Rickie Fowler's fairway wood shaft, which measures 42 inches with 0.5 inches of tipping.
Does tipping a shaft change the bend point?
Remember, though, that tipping a shaft will change the bend point, and it’s also irreversible, so make sure you know the purpose behind tipping your shaft. 2. Weight. The weight of a shaft has a similar correlation to performance as flex.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
How to know if you have picked the wrong shaft?
If you have picked the wrong shaft, you will immediately know. When you go to swing the club, you will find that the ball won’t go as far as it should, and you may hit the ball off-centre. You may also find that the club may feel “dead” if the shaft is too heavy or stiff, or alternatively it can feel too soft and weak – both can significantly impact your game. Therefore, if you don’t know what to do, don’t guess, because you may end up with the wrong shaft for you and it can be costly to rectify if you have to buy more shafts or new golf equipment.
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
How important is shaft length?
Once the shaft is installed onto your golf club, you must determine the right length for you. But how important is shaft length, we hear you say? Well, the importance of length, according to research, is extreme. For instance, ball impact that is 0.5 inches off-centre equates to a 7% loss of carry distance, and an impact that is 1 inch off-centre equates to a 14% loss of carry distance. So, the key to choosing the right shaft is finding the correct length that provides a repeating, solid hit each time.
How to get a golf club shaft off?
Place the shaft in a vice so that it is held firm. Using a torch or heat gun, apply even heat to the hosel area until you can twist the head off the shaft (this generally takes about a minute). The hosel can reach temperatures in excess of 1,000 degrees F. Always wear work gloves when removing the shaft from the club head.
How to remove a broken shaft from a golf club?
If there is an existing or broken shaft on the club, the first step is to remove it. You need to break down the epoxy bond between the shaft and the head. To do this, you need to provide even heat to the hosel (where the club head attaches to the shaft). This can be achieved by using either a torch or a heat gun.
How to install graphite shaft on golf club?
When installing a graphite shaft, check to be sure that the graphics are lined up. Take a soft rag and some acetone and clean all remaining epoxy residue from the hosel. Let the epoxy set for approximately 12 hours. Place the club in a standing position until it is fully cured.
How to remove paint from graphite shaft?
Before installing, you need to remove the paint from the tip of your graphite shaft (plating in the case of a steel shaft). Use a razor knife to remove paint from a graphite shaft and heavy-grit sandpaper when dealing with steel.
Does fitting a shaft help your golf game?
Fitting a new shaft for your club takes a bit of work but will help your game.
How to adjust golf clubs?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.
How to determine the correct size golf club for beginners?
The correct golf club size starts with the golfer’s height and wrist-to-floor measurement.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
What is custom fitting golf?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What to look for in a beginner golf club?
For beginners, it’s likely the expert recommends more loft on your driver, lighter shafts with less flex, and more forgiving irons. For example, if you’re a beginning golfer who has blade irons with long, extra-stiff steel shafts, it’s likely they aren’t right for your game. So even if your swing greatly improves with the help of a top instructor, you’ll be fighting an uphill battle.
What happens if a golf club is too short?
If a club is too short, too long, too light, too heavy, the lie angle is completely wrong, the club itself is the wrong design, or any of a number of factors are off , you could be setting yourself up for failure. The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
Why is it important to get fit for beginners?
“It’s very important that beginners get fit because we develop our swings around the gear we use without even realizing it ,” Briand says.
Which is better for beginners: blade irons or left irons?
The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
How to set yourself up to play golf?
In conclusion, here are the recommended steps to take in order to set yourself up to to play great golf and enjoy the game for years to come: 1. Get a basic club consultation from an expert. 2. Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs) 3.
Do you have to buy the latest golf clubs?
Now, it’s important to remember that you do not have to buy the latest and greatest equipment for it to be a good fit. You don’t have to spend $3,000 on shiny new clubs, and you actually don’t even have to buy a full set.
Will my swing patterns change?
It is likely that your swing patterns will change after a number of lessons. Your angle of attack may change, your method of releasing the club could shift, and you will (hopefully) gain some speed and strength, too.
How to determine what length golf clubs to buy?
Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
What Are Standard Length Golf Clubs?
As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
How does the handicap index work?
The golf handicap index works by calculating your score s from previous rounds. Therefore with better shots you are more likely to achieve better scores on the golf course.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
How to determine shaft length?
Factor in such things as your height, the length of your arms and your type of swing to determine the length of your shafts. As an example, you may be tall but you also have long arms, so you may not need longer shafts. Also, if you tend to grip down on all of your golf shots, you might consider shortening your shafts slightly. After consulting a shaft length chart (see References), make final adjustments based on your style of play and your height.
What are the elements to consider when changing golf clubs?
They are the length, the amount of flex (stiffness of the shafts) and the materials that comprise them .
Why use graphite shafts?
Choose graphite shafts because, being lighter, they are easier to swing faster; this will translate into greater distance. However, if you are a low handicapper, you may place a premium on being able to feel your shots more with steel shafts, particularly with your irons.
How many flexes are there for graphite shafts?
Choose the proper flex; there are five for both graphite and steel shafts. They are Ladies, Seniors, Regular, Stiff and Extra-stiff. If you don't have the help of a professional club fitter, you can determine which flex you should have by how far your drives carry in the air.
What should shafts be based on?
Furthermore, you should choose shafts that are based on your physical stature and the status of your game. If you choose the right shafts, you will soon see your game improve and your love of the game strengthen.
Do all golf clubs have to be steel?
Step 4. Understand that all your golf clubs do not have to be either graphite or steel. In fact, they should vary depending on how you hit a particular club and what you are trying to do with it. For example, you could have graphite shafts in your driver and hybrid clubs to give you greater distance, and steel shafts in your irons ...
Flex/Frequency
Length
- The length of your driver shaft will help you control the directionof the ball more. A shorter shaft will give you better accuracy. A longer shaft will give you more distancebut will cost you some fairways in regulation. You will sense a theme in this article that the name of the game is to find balance, and that includes length. There is a perfect length for you. A shorter driver will also affe…
Weight
- The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball. But it’s not as easy as just going out and getting a lighter shaft. A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver sinc…
Kickpoint
- Now we are getting into some in-depth driver talk. This is a word you may not hear too often amongst your weekend foursome pals. This refers to a spot or small range on the shaft where it experiences the most bend under duress or that of a golf swing. I’m sure you noticed that the grip end is thicker than the clubhead end. This tapering is different with each shaft and will affect ho…
Torque
- Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting. Not to sound like a broken record but generally, you want your torque to be not too high and not too low. Based on your swing speed, your club fitter can determine how mu…
Cost
- It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300. Yes, one shaft without a head or grip on it can cost $300+. Not many people want to drop that much cash on half of a driver. But that should be proof of how much science and technology goes into these so that we can all hit it a little furthe…
Conclusion
- Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water. It’s just easier to hire a trained professional and get it done right from the beginning. Getting fit for a driver shaft is a great learning experience and you will feel like a professional when you get to see all your numb…