Otherwise, you can easily reset your engine by following these simple steps, which, thankfully, are pretty standard for most models:
- Park your golf cart in an area where you feel comfortable working.
- Turn off the cart and put it in park mode to keep it in place.
- If you want, you can place cinder blocks in front of and behind the front wheels to prevent movement.
- Locate the motor cover for your cart, which is usually at the back on many models.
- Use a screwdriver to carefully open up the cover and expose it for easier workability.
- Identify your main battery supply (usually the largest battery) on your motor.
- Check around this supply for a small red button that may or may not be labeled “ Reset ”.
- Press and hold this button for a few moments and then release it to reset the motor.
- Put the cover back on your golf cart motor and seal it back with the screwdriver.
- Remove the cinder blocks from the golf cart.
- Hook your battery charger back up to your motor to get it back to an optimal state.
How do I Reset my Electric golf cart?
Use a screwdriver to locate and expose the motor. It may have a small red reset button near the main power supply. Press this button and reassemble your cart. Connect the golf cart to the charger unit and recharge the batteries. Attempt to operate the golf cart again.
How to reset the club car golf cart OBC?
Easily Reset the Club Car Golf Cart OBC 1 Reconnecting the OBC into the system: 2 Key switch to off 3 Set forward/reverse switch to neutral 4 Put tow/run switch to tow 5 Reconnect the negative battery terminal from the battery pack
How to fix a golf cart that won’t turn on?
Connect the golf cart to the charger unit and recharge the batteries. Attempt to operate the golf cart again. You may also be able to test the motor in isolation from the circuit using a charged battery. If the motor does not spin, it might be burnt-out.
How do you reset a potentiometer on a golf cart?
Make sure that the potentiometer is not cracked and that the connections are secure. Use a screwdriver to locate and expose the motor. It may have a small red reset button near the main power supply. Press this button and reassemble your cart. Connect the golf cart to the charger unit and recharge the batteries.
How do I reset my golf cart?
Easily Reset the Club Car Golf Cart OBCKey switch to off.Set forward/reverse to neutral.Put tow/run switch to tow.Disconnect the negative battery terminal from the battery pack.Put the tow/run switch to run.Put forward/reverse switch to reverse.Put key switch to on.More items...
Where is the reset button on a ezgo golf cart motor?
Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.
How do I know if my electric golf cart motor is bad?
You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition. If your golf car won't start, is slower than it used to be, or is experiencing other technical problems, you could have a bad motor on your hands.
Why does my electric golf cart have no power?
The main reason why a EZGO golf cart can lose power is because the battery is not charging due to loose cables or the corrosion of the connecting terminals. If they become loose or some of the electrical circuits' connecting wires snap, the battery loses power.
Do all electric golf cart motors have a reset button?
Electric golf cart motors have a reset button on their chassis which is designed to put your motor back into its original factory state. While it doesn't repair damage that may have occurred to the motor over the years, obviously, it does help to overturn any changes to the operation which may have occurred.
How do you test an electric golf cart motor?
3:5410:28Testing 36 volt golf cart motor with 12 volt battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just want to connect the two together with this again a2 to s1 with this jumper cable. And youMoreYou just want to connect the two together with this again a2 to s1 with this jumper cable. And you want to take the battery box or positive cable and put it on the s2.
What are the symptoms of a bad solenoid in a golf cart?
If your golf cart fails to turn on when you turn the key on, this is the most obvious sign of solenoid failure. The solenoid clicks a little with the ignition system in regular operation; in most cases, a failing solenoid will not snap.
What happens when an electric motor burns out?
When a motor burns out, a short circuit occurs in the windings and the motor ceases to turn. You can test for a short circuit by checking the resistance of the windings with an ohmmeter; a reading of 0 ohms (Ω) indicates a short.
Do electric golf carts have fuses?
Yes, golf carts contain fuses just like those found in a car or truck.
Where is the reset button on a Club Car golf cart?
Expose the motor (you'll probably need a screwdriver to remove the cover), and look for a red button. It is usually near the main power source, where most of the wires are connected. Once you've pressed the button to reset the motor, reassemble the cart, charge up the batteries, and give it a test run.
Why did my golf cart just stopped working?
When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
How do you fix a golf cart that won't move?
When the cart won't move, you have to be sure that the batteries are sending sufficient power to the circuit. You must check the fuse. Use the voltmeter to check the voltage at the key switch. In a cart with batteries rated at 48V, it must show 48V at the key switch.
What happens if you disconnect the controller from a golf cart?
If you disconnect the controller from the golf cart will cause a soft reset of the of the OBC when the battery power is removed. Once the battery powered is removed, the OBC internals will clear any faults. Once the controller is reinstalled, everything should work fine.
What is an OBC in golf carts?
Club Car uses the On Board Computer or OBC to monitor and control functions of their golf carts. If it functions properly it controls the charging and the drive system. If the OBC detects a problem with the charging system or the drive systems it shut down.
How long does it take for the OBC to reset?
Lock the throttle pedal down with a second set of hands or object. The reverse buzzer will sound and go off in approximately 30 seconds. Leave the cart like that for 5 min to cause the OBC to reset.
Is tidewater cart responsible for golf cart problems?
Tidewater Carts is not responsible for any malfuntions or problems that you incur directly or indirectly from folowing these procedures. Keep in mind that testing and troubleshooting should be done by trained and paid golf cart tech's.
What happens if a golf cart motor doesn't spin?
If everything else is working properly but the motor does not spin, it may be burnt out. You can burn out a motor by overloading the golf cart or using it on too steep a grade. If the motor is burnt out, it must be completely replaced.
What to do if your electric cart won't run?
Once you’ve pressed the button to reset the motor, reassemble the cart, charge up the batteries, and give it a test run. If you’ve reset the motor and the cart will still not run, there are a few things that could be wrong with your electric motor.
How many ohms does a golf cart potentiometer have?
Most golf cart potentiometers are 5K – 0 ohms, which means the potentiometer relays 5,000 ohms when you floor the accelerator. Some older models use volts instead, so double check the resistance type before you try to test the output. There are two terminals on a potentiometer.
What to do if your solenoid is high?
If you don’t hear a click when the cart is on and you’re pressing the accelerator, switch your multimeter to volts and place a contact on each of the small solenoid terminals. These small terminals connect to the batteries.
How does a potentiometer work on a golf cart?
When it is working properly, the potentiometer allows your golf cart to accelerate smoothly. Find your potentiometer and inspect it for any cracks, broken parts, or disconnected wires.
How to protect a golf cart battery?
Golf cart batteries are highly corrosive, so avoid spills at all times. Wear protective gloves when testing or cleaning your battery. It is also recommended to wear protective glasses when you are handling the battery, so corrosive liquid does not splash into your eyes.
Can a golf cart battery be corroded?
With a wire in the wrong place, you could cause a short or another electrical issue that will make your problem worse. Always make sure wiring connections are clean and tight, for safety and for the best contact. Golf cart batteries are highly corrosive, so avoid spills at all times.
How to reset a golf cart?
Use a screwdriver to locate and expose the motor. It may have a small red reset button near the main power supply. Press this button and reassemble your cart. Connect the golf cart to the charger unit and recharge the batteries. Attempt to operate the golf cart again.
Why does my motor not spin?
If the motor does not spin, it might be burnt-out. Motor burn-out can result from excessive resistance from weight, grade, or poor traction. Uninstall the motor and inspect it for damaged bearings, field coils, or worn brushes. These parts can be replaced with right tools and some patience.
Can you reset an electric golf cart?
The motor is the last in a series of components that could fail. After determining that the cart’s batteries and charger are working properly, you can reset the motor to see if it runs. You must replace the motor if it has burnt out.
How to check if electric golf cart is running?
It sounds absurd, but if your electric golf cart is not running, the very first thing I would check is the reset button on the side of the motor, if your cart is so equipped. Check around the outside of the motor and see if you can find a small button to press. This is usually a safeguard against overheating.
When did golf carts start having separate excited motors?
In 1999, some golf cart manufacturers started offering Separately Excited Motors. Sepex (Regenerative) Motor carts have a toggle switch F&R device as opposed to the lever-action. In addition to this identifier, they have a tow/run or tow/maintenance switch which cuts power to the controller. Most of the modern-day carts are equipped ...
What is wrong with my electric golf cart?
Electric golf carts are usually trouble-free and do their job efficiently and with no fuss, but sometimes you suspect your golf cart is experiencing a problem. If the speed seems to be off, or your cart gives off a burning wire smell, your golf cart motor might have a problem. Using a multimeter, a jumper wire, and a 12-24 volt power source, ...
Why is it important to test a motor before replacing a controller?
This is an important test to do on your motor before replacing the controller because a short could damage the new controller irreparably. Please note that this test will not find a short in the armature. Note that continuity testing is not directional, so it doesn’t matter if the red and black are reversed.
What to do if battery is too low?
If your batteries are too low for the charger to detect and it will not switch on, you’ll need to individually charge the batteries with a standard 12-volt battery charger. Once the batteries are at the minimum that the charger needs to see, there should be no problem charging them normally.
What is a golf cart?
Golf carts are also known as golf cars. The term "cart", in its purest sense, refers to a vehicle that does not travel under its own power. Golf cars, however, are most commonly referred to as golf... link to Club Car DS Wiring Diagrams 1981 To 2002.
What is a series motor?
A series motor has field and armature windings that have the power fed to them from the same source, either in series or parallel. A SePex motor, as the name indicates, is a motor that has a separately excited field and armature windings. These two motor functions are sent to the PDS or DCS giving greater control over the motor.
How To Tell If Your Electric Golf Cart Motor Is Bad
Even the most well-maintained golf car will have technical problems eventually. Still, it’s rather unfortunate if the problem is with your motor or engine. You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition.
Test Your Batteries
When your golf car doesn’t start, it’s tempting to jump straight to the perceived problem area: the motor. But the issue could be a simpler one concerning another part of the car. Before checking its other parts, test the voltage of your batteries to make sure they’re working.
Check the Solenoid
If your batteries are charged and in working condition, but your car still won’t start, check its solenoid. A solenoid is an electromagnetic coil of wire that transmits energy from your car’s battery to its motor to help it start. Every time you start your golf car, you should hear the click of the solenoid.
Examine the Potentiometer
If your car still won’t start or you notice any issues with acceleration, it’s time to check the potentiometer. The potentiometer sends an electric signal from the accelerator pedal to the speed controller, allowing the car to accelerate properly.
Check the Motor Itself
If you’ve checked all the above parts and none of them are responsible for your trouble, inspect the motor of the golf car itself. Sometimes, the issue can be resolved by simply resetting the motor. To reset your golf car’s motor, open the hood to expose your motor and look for the red reset button.
How to check if golf cart battery is working?
Connect a voltmeter to the negative terminal on the battery. Connect the voltmeter to the M terminal on the controller. Push down on the golf cart pedal. A clicking sound should be heard. The batteries show a full charge. You must determine whether your golf cart batteries are working properly or not.
How to tell if a golf cart is running?
The simplest test to ascertain your golf cart controller’s performance is to to watch whether it runs when the batteries are fully charged with a slight push of the pedal. If you hear a distinct clicking noise, then your golf cart is running correctly. If there is no clicking sound, then the solenoid is not allowing power to flow to your controller.
Why is my cart not starting?
If your cart doesn’t start even when your batteries are full, and no clicking sound comes from the solenoid, it means your solenoid is defective or accelerator. If you hear a distinct clicking sound, this means that there is nothing wrong with solenoid as it allows power to flow to the controller.
What is the third pin on a club car charger?
There are several sources for a specific club car charger, and you need to find out what suits your cart best. For the external charger, it is the third pin that is connected with the negative of the charger or 3-pin plug.
How to reset club car OBC?
The best way to reset your club car OBC is first to switch off the key switch. Then you put your cart to neutral and then put tow run switch to the low position. After this, you should disconnect the negative of the battery terminal from the battery set.
What voltage should a 48V club car battery be?
For your 48 volt club car all batteries should read 9.3v so as to give the pack its optimal performance. However, if any one or more batteries give a reading below 7.0v and the same differs much more than the standard tolerable limit of 0.5v against other batteries in the pack, then such batteries are stated to be bad.
How to test club car precedent controller?
To test a club car precedent controller, connect a voltmeter between the negative terminal of your cart’s battery and the M terminal on the controller. Then push the pedal down and look for a clicking noise from the solenoid. Your batteries should read as full. Connect a voltmeter to the negative terminal on the battery.
Do E-Z-Go Golf Carts have titles?
E-Z-Go Golf Carts, unlike vehicles, do not have a title, but they do have serial numbers. If you are buying a golf cart, it is essential to check the serial number to ensure you do not buy a stolen one. Each E-Z-Go Golf cart has a unique serial number that you can use to identify your golf cart.
Where is the E-Z-Go Cart Serial Number
As mentioned above, all E-Z-Go Golf carts have unique serial numbers. These numbers are essential when buying replacement parts for your golf cart. Textron Specialized Vehicles has been building golf carts for a long time, and the serial numbers are placed on different parts of the golf carts.
How do I push my E-Z-Go Golf Cart?
It can be frustrating when your battery is flat and your golf cart will not roll. To push it to the nearest charging or gas station, you need to release the motor brake. Follow these easy steps to do that.
Why does my E-Z-Go golf cart not move
There are several reasons why your cart refuses to move, but you should check the battery before anything else. If the battery is charged, here are some other reasons why your golf cart will not move.
Are all E-Z-Go Golf carts electric?
No, there are both electric and gas-powered E-Z-Go Golf carts available. Bear in mind that there are several models you can drive on the street, but those are all-electric. These electric models run on batteries that you have to charge at least every 24 hours, depending on how much you use them.
How to tell the Assembly year of my E-Z-Go golf cart
The placement of serial numbers is discussed above, and you will find the manufacturer’s number right next to it. The manufacturer’s number consists of one letter and 3 or 4 numbers. The last two numbers indicate the last two digits of the year of assembly.
How to service E-Z-Go Golf Cart
Like all vehicles, E-Z-Go golf carts require regular maintenance to enhance longevity and performance. You should ensure that your golf cart is serviced after every six months of use. That will ensure that you spot problems and repair them early, which will help reduce repair costs. Here are essential guidelines for E-Z-Go golf cart maintenance.
Check The Batteries
Inspect The Charger and Test The Wall Socket
Listen For The Solenoid
Examine The Potentiometer
Reset The Motor
- Just like many other electronics, an electric golf cart motor sometimes just needs to be restarted to clear the cobwebs. If you’ve checked and double-checked all of the parts mentioned above, and the cart still isn’t moving, you’ll want to reset the motor. t’s simple to do – just a press of a button. The reset button acts as a mini circuit breaker ...
Precautions
Conclusion