To check if the drive belt is too tight, follow these steps: Switch OFF the golf cart’s engine. Reach to where the drive belt is located and use your fingers to press the drive belt between the two clutches.
Why is my EZGO golf cart losing top speed?
A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform. If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch. In this case you’ll need to call a certified technician to inspect your golf cart.
What does a drive belt do on a golf cart?
To primary function of a golf cart drive belt is to connect the primary clutch and the secondary clutch. The primary clutch drives the cart and the belt helps it to rotate the secondary clutch (they are referred to as the drive clutch and the driven clutch respectively). The drive belt, unlike some of the other automotive belts, are very thick.
How to adjust clutch on EZ GO golf cart?
Adjust Clutch on EZ GO Golf Cart There are mainly two clutches in the EZ GO golf cart. So people should find out first which one is the primary clutch and which one is the secondary clutch exactly. People may need to cut first or break into the end side of it.
How to replace a clutch on a golf cart?
Switch OFF the golf cart’s engine. Take a screwdriver and gently insert it between the belt’s bottom and the clutch’s groove. Slowly rotate the clutch and the belt will come off easily. If the belt is already loose, taking it out is very easy.
How do I know if my golf cart belt is too loose?
0:012:00How to Check the Belts in your Gas Golf Cart | Golf Cars UnlimitedYouTubeStart of suggested clipEnd of suggested clipDown below and you don't want to press the moderate pressure on that belt you're gonna want to seeMoreDown below and you don't want to press the moderate pressure on that belt you're gonna want to see about 3/16 to 1/4 inch of deflection. There no more than that that'll be your proper.
How do you tighten a clutch belt on a Club Car golf cart?
Slide the old drive belt off the front drive clutch pulley, and then the rear clutch pulley. Slip the new belt around the golf cart's clutch pulley, and then stretch it out over the front pulley. Pull the front pulley forward slightly to increase the belt tension, and then tighten the tension bolt with the wrench.
Why wont my EZGO golf cart go forward?
The main reason why a EZGO gas golf cart will not go forward is because of a locked up brake, or a faulty solenoid and accelerator. A defective Run/Tow or Forward/Reverse switch can also cause a EZGO to not move forward.
How does a golf cart drive belt work?
0:543:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the large the rear is large what happens when you start this thing up and start to speed up theMoreAnd the large the rear is large what happens when you start this thing up and start to speed up the engine this clutch actually squeezes together and it large and large uns the size of the ring that
How tight should a golf cart drive belt be?
The drive belt should not be too tight. If it's too tight it can risk wearing off faster and it's also harder to shift gears. To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger.
How do you tighten the drive belt on a Yamaha golf cart?
2:595:12Yamaha G2, G9 Drive and Starter Belt Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll put it between stir generator and the block of the engine you do not press hard just a littleMoreYou'll put it between stir generator and the block of the engine you do not press hard just a little taunt. Then we'll tighten the 12 millimeter bolt I just will go.
Why won't my golf cart go forward or backwards?
If the power from the battery pack is not reaching the motor, then the Club Car golf cart won't move forward or reverse. In such cases, there are a few components in between the two that need to be checked. The solenoid is one major component. Check if the resistor between the two big terminals on the solenoid is hot.
Why does my golf cart click but not move?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
Why does my golf cart not accelerate?
Bad Solenoid If your golf cart does not accelerate, there is a possibility of the damaged solenoid. The solenoid is basically an electrical switch that enables the battery's flow from the battery into the motor. Check out the signs of the bad solenoid.
How do I know if my EZGO clutch is bad?
A sudden inability to maintain even slow speeds when heading uphill or changing elevation. Slowing down to a crawl, then speeding up, then slowing again, seemingly without reason. Jolting during startup. A 'cranking' sound when starting up the golf cart.
Why is my golf cart clutch not engaging?
Cleaning the clutch thoroughly might be the simplest solution to this problem. You could also try lubricating the system with a good quality lubricant. This might free up the clutch and thus prevent the squeaking noise. Another common reason could be due to the weights present inside the system hanging up.
How do I rebuild my EZGO driven clutch?
0:395:37GBoost E Z GO ClutchKit CKSDEZ19 - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this cart loosen the leaf spring bolt and slide it back so you'll have room to remove bothMoreFor this cart loosen the leaf spring bolt and slide it back so you'll have room to remove both clutches and belt. Now we can remove both bolts for the driven.
How do you change the belt on a Club Car Precedent?
5:269:16Club Car DS Tune Up Kit | Starter/Drive Belt - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have to loosen all the bolts up the two up front which are 9/16 and loosen the adjustment bolt.MoreYou have to loosen all the bolts up the two up front which are 9/16 and loosen the adjustment bolt. Here which is a half-inch. So let's get these things loosened. Up.
How do you change a belt on a club car?
2:0011:52How to Replace your Starter Generator Belt on the 2004 Club ...YouTubeStart of suggested clipEnd of suggested clipSo you pull to the side as you on this first on the front belt you just kind of rotate it. Back.MoreSo you pull to the side as you on this first on the front belt you just kind of rotate it. Back.
How do I replace the belt on my electric golf cart?
Answer provided byFirst, raise the golf cart engine cover to access the drive belt inside the engine compartment. ... Next, loosen the drive belt tension bolt with an open-end wrench on the front pulley. ... Finally, pull the front pulley to increase the belt tension. ... MORE: Average car insurance cost in 2021.
How do you put a belt back on a golf cart?
2:475:57Changing the Drive Belt and Starter Generator Belt 2008 EZGO TXTYouTubeStart of suggested clipEnd of suggested clipJust. First put the belts on and then tilt the starter generator as far as you can and tighten thatMoreJust. First put the belts on and then tilt the starter generator as far as you can and tighten that nut up. By hand first and then use the wrench to get it a little bit. Tighter.
How to check if golf cart drive belt is too tight?
To check if the drive belt is too tight, follow these steps: Switch OFF the golf cart ’s engine. Reach to where the drive belt is located and use your fingers to press the drive belt between the two clutches. The belt must deflect at least one and a half inches under the pressure of your fingers.
What happens if a golf cart belt is too tight?
If the belt is too tight then your starter will be under strain and this should be avoided. The best test to see if a golf cart drive belt has the correct tension is to use the Finger Test.
How to tell if a 1997 club car has a slipping drive belt?
When a 1997 Club Car drive belt is slipping, first make sure that it is the drive belt that is at fault. You may have to remove the cover and watch the clutches in action while the cart is in motion to make sure that it is indeed the drive belt that is slipping.
How to remove drive belt?
Removing the drive belt involves holding the belt with both hands in the center between the driven and drive clutches and lifting the belt. You must now rotate the driven clutch counter-clockwise and slip the belt off the sheave. You can then slide the drive belt off the drive clutch.
Why is my club car drive belt so tight?
The reason for a Club Car drive belt being too tight can be because the drive belt is too small for the golf cart. The way to check if the belt is fitted correctly is to push the belt down with one finger at the center between the clutches. It should not deflect more than 1.5inches. It should not be less as well.
What is the primary function of a golf cart drive belt?
To primary function of a golf cart drive belt is to connect the primary clutch and the secondary clutch. The primary clutch drives the cart and the belt helps it to rotate the secondary clutch (they are referred to as the drive clutch and the driven clutch respectively). The drive belt, unlike some of the other automotive belts, are very thick.
Why does my golf cart drive belt slip?
The reason for the drive belt slipping could be that it is of a larger/longer size and therefore loose. You may start feeling the slippage after driving for a while. This is because the belt gets heated up after the golf cart runs for some time and loosens further .
How to Adjust the Clutch on EZ GO Golf Cart?
The golf carts badly need a strong clutch. Almost every golf cart has a clutch. A clutch help to running this golf cart into any downhill roads smoothly. It provides a smooth start up and takes off while driving a golf cart. It is also really necessary for all golf carts because of their acceleration and deceleration.
What is a Golf Cart Clutch?
This is a type of component which is allowed to bear the hardest road situation for any golf cart. This is mainly used in a golf cart to improve more strength while driving downhill roads. People need to drive their golf carts sometimes in any bad pathway. So then they need to better service from the golf cart.
How to Adjust the Clutch on EZ GO Golf Cart
There are different kinds of golf carts. They also have various types of a clutch. But almost they are the same. They vary depending on their model and manufacturer. Sometimes people need to change their clutch. So some people want to replace the old one with a new clutch. Usually, everybody does not satisfy with the regular clutch.
How to Remove the Clutch of the EZ GO Golf Cart?
There are some ways to change or remove the clutch from any golf cart. People should know about CVT. This is an important part of a golf cart. So before removing the clutch, we should describe a few things about CVT.