- Obtain the proper measuring tool. You will need at least a 48-inch ruler/measuring stick/tape measure in order to measure the length of your golf clubs.
- Position the golf club. The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground.
- Place the measuring stick directly behind the golf club. ...
How to fit yourself for a golf club?
- It starts with length. The right length puts you in an athletic position and gives you the ability to make a repeatable swing.
- Next is the lie angle. Lie helps the club move through the turf for more consistent results, as well as helping counter your misses.
- Then you’ll want to select your shaft and flex. ...
- Finally, you’ll select your grip. ...
How to size golf clubs for better performance?
- Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
- Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
- Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...
How do I choose the correct golf clubs?
Player Factors in Golf Club Choice
- Average score / Skill level. In a nutshell: The more skilled you are, the less help you need from your equipment. ...
- Shot tendency. The next factor to consider is the direction and height of your typical shot. ...
- Swing speed. Another key in choosing the right equipment is your swing speed (aka clubhead speed). This is the No. ...
How much for good set of golf clubs?
The complete set of golf clubs for average golfers goes from as low as $100 to as high as $1,200. While preparing this golf club’s value guide, we noticed a surprising trend in golf club prices. The average cost of a complete set of golf clubs is the same (in some cases, lesser) with the average price of the set of each component, such as iron.
How do you measure what size golf clubs you need?
To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.
What length should my golf clubs be?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
How are golf irons measured?
1:002:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipWith the center of the sole touching the ground in your ruler. Back by the heel touching the ground.MoreWith the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
What length driver do I need for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How long should a golf club shaft be?
Rules of Golf for competition allow for a club shaft length of up to 48 inches, while the average driver length used is closer to 45 inches.
What is the first factor to take into account when playing golf?
The first factor you must take into account is your height . Generally, the taller the player, the longer the clubs. (This isn’t always true, and we’ll walk through that in a moment.)
How long should a putter be?
It’s important to note that there isn’t a standard length for putters! Most putters range between 32 and 37 inches in length. Control and accuracy are critical here, and as such there is no standard rule of thumb for choosing a putter. You’ll need to account for your experience, comfort, stance, and putting style when choosing the best putter length. This is best done by trying out several different putter lengths in your local golf shop or sporting goods store.
What happens if you have too much flex in your golf club?
Club flex is directly related to ball trajectory, and if you have too much flex, you could have trouble getting air under the ball or could experience hook shots. Alternatively, if your club has too little flex, you may slice. You should consider how long you typically drive the ball when thinking about club flex.
What is the difference between a longer club and a shorter club?
It’s easy to overlook this detail, but a club length has a lot to do with a player’s swing mechanics. The shorter the club, the more upright a player needs to swing in order to hit the ball effectively, while a longer club will require more of a flat swing.
Why is a longer club shaft better for driving?
Club head speed is a big influence in your shot’s distance, and a longer club shaft increases the head speed, allowing you to hit the ball farther. This is why you’ll often see longer drivers in use during long drive competitions.
Is golf expensive?
Golf can be an expensive sport, but buying the wrong club can make it expensive and frustrating, as club length affects both the playability of your clubs and your overall skill. Make sure your purchase is the best option for your game.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
Can you put a putter straight up?
Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.
Do you need to buy a new shaft for a golf club?
All good-quality golf clubs can be re-shafted. You do not need to buy an entire new club if you need a new shaft. This luxury saves on expense, especially when it is only one club that needs replacing.
Why measure golf clubs?
You may also need to measure the clubs to ensure that they are regulation length for an upcoming tournament or event. It is important to know the proper way to measure the entire length of a golf club.
Where to place measuring stick on golf club?
Place the measuring stick directly behind the golf club . The stick should make contact with the shaft of the club and be placed on the ground right at the heel of the golf club you are measuring. The numbers on the stick should be pointed toward you so you can easily obtain a reading.
How to hold a golf club steady?
The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground. Then, place your hand on the top of the club to hold it steady.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What are the problems with driving a golf club?
Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.
What happens if the club is too long?
If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.
What is the average driver length for Rickie Fowler?
Rickie Fowler is known to have used a 43.5” driver length and the Tour average build is 44.5”. Tour players main priority is hitting fairways for days, weeks and months. Shorter driver lengths make it easier to hit with the centre of the face more frequently.
What happens if you have too short of a club?
Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).
What can you use to wipe off golf ball?
You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.
Do all iron heads have the same length?
Not all brands will have the same ‘standard’ length. Not all iron head types within a brand will be the same length. More forgiving heads can justify a longer playing length to encourage faster swing speed. The heads are bigger, blade longer and perimeter weighting is better to maintain ball speed with off centre hits.
Should taller people use longer irons?
Generally speaking, taller people should use longer irons and shorter people should use shorter irons compared to a standard golf club length. Length can be made-to-measure with new golf irons and can be adjusted on your own golf irons. Not all brands will have the same ‘standard’ length.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
How to make your golf swing more efficient?
To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.
Who invented single length irons?
Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.
