The official rules state that "If more than 78 golfers make the 36-hole cut, a second cut, after 54 holes, takes place." MC means that the golfer missed the cut. MDF means that the golfer missed that second cut that sometimes occurs. The MDF (made cut didn’t finish) distinction began in about 2008 when they introduced the acronym MDF.
Full Answer
What is the MDF cut in golf?
The PGA Tour replaced it with the cut rule that is still in use now: If more than 78 golfers make the 36-hole cut, a second cut, after 54 holes, takes place. And "MDF" lives on as a way to refer to the golfers who miss that 54-hole cut.
How is the cut determined in golf?
In this case, the next highest score below that of the 70th player was used, the cut was the 70th player prior to 2019-2020 season, and it is determined how many players would make the cut should that be the line.
Can MDF be cut to size?
With that being said, MDF usually comes in a few specific shapes and sizes, which means that you may very well need to cut it down to size. Now the problem here is that MDF is not the easiest of the engineered wood materials to cut.
How to cut MDF with a table saw?
Take the saw and start sawing the line from either side. Start on one side, and then once you get about a third of the way into the MDF, repeat the process on the other side.
How do they calculate the cut in golf?
The cut rule for regular PGA Tour events sees the top 70 advance to the weekend with the score of the 70th-placed player being the score needed to make the cut. Any player that is level with or above the 70th-placed player on the leaderboard makes the cut and plays the final two days of the tournament.
What is the MDF rule in golf?
The MDF rule specifies that if more than 78 players qualify for the final two rounds, the cut score will be lowered to the next available score. These golfers receive an MDF note beside their name on the tournament's official scoring. They each earn a portion of the tournament's purse but do not continue play.
How do they determine the cut at the Masters?
From 2013 to 2019, the cut included the top 50 players and ties, plus anyone within 10 strokes of the leader. The most recent cut rule change came in 2020 and is still in effect for 2022, with the low 50 players and ties qualifying for the final 36 holes.
What determines the cut line in PGA golf?
How is the cut line determined? The cut line at 36 holes is the top 70 players plus those tied at the end of that group.
What is the 10 stroke rule in golf?
The 10-Shot Rule meant any player within 10 shots of the lead after 36 holes also made the cut, whether they're inside the top 50 and ties or not.
What is the maximum strokes per golf hole?
MAXIMUM STROKES (PER HOLE) The Rules of Golf do not limit the number of strokes a player may take on any one hole. If it requires seventeen (17) strokes to hole out (including penalty strokes) then your score for that hole is "17".
Who makes the cut at Augusta?
Tiger Woods makes the cut, Scottie Scheffler leads after Masters second round. Despite a rocky second round, Tiger Woods's comeback run at the Masters will continue. The five-time champion made the cut with a 2-over-par 74 in windy conditions Friday at Augusta National, moving to 1 over par on the tournament.
How does the Masters purse get split?
Each year, the Masters' total prize money is divided between the fewer than 100 golfers. Of the 91 players competing this year, only the top 50 will make the final cut. All of these players will receive a portion of the total purse.
What is Amen Corner?
"Amen Corner" is the nickname given to the 11th, 12th and 13th holes at Augusta National Golf Club, home of The Masters Tournament. Those holes make up a key stretch of the back nine on the golf course, holes where exciting things often happen that affect the outcome of the tournament.
How is the cut determined at the US Open?
Continuing with recent U.S. Open cut rules, the top 60 golfers after the first two rounds of the 2022 U.S. Open at The Country Club at Brookline will make the cut, plus any golfers tied for 60th or better.
Did any club pros make the cut at the PGA?
Though no PGA Club Professionals made the cut this year, Matt Borchert will be receiving a crystal bowl, in honor of his finish, on Saturday morning at Southern Hills Country Club.
What is the PGA cut rule?
The PGA of America's “cut rule” is the same used at the Open Championship. The U.S. Open makes a cut at the low 60 players and ties. The Masters has a cut at the low 50 players and ties, bumping that number up and eliminating its 10-stroke rule in 2020.
What does MDF mean in golf?
"MDF" is an acronym that sometimes appears next to a golfer's name on PGA Tour leaderboards seen in print or online. Here's what it means: 1 Short answer: "MDF" stands for "made cut/did not finish." 2 Longer explanation: Everyone knows what "MC" means when it appears next to a golfer's name in tournament scores; "MC" means " missed cut ." But the "MC" acronym has been around for a long time. Beginning in 2008, a new acronym started showing up in golf scores: MDF. And what does "MDF" stand for? MDF, when it appears in golf scores, means "made the cut but did not finish the tournament." That golfer made the 36-hole cut, but missed the 54-hole cut.
How many holes are cut in PGA Tour?
Today, at a handful of tournaments on the PGA Tour each year, there are actually two cuts: there is the traditional cut after 36 holes (those golfers go home following completion of the second round); and there is a second cut after 54 holes.
Why is the 36 hole cut not needed?
At most tournaments the secondary cut is not needed, because the 36-hole cut does the job of trimming the field to the desired size. But at some PGA Tour events, the first cut leaves more golfers than the tour wants playing the weekend rounds. That is when the 54-hole cut is triggered.
Why do golfers miss the secondary cut?
The reason for the secondary cut has to do with keeping tournament fields smaller and more manageable for the weekend rounds.
When did the MDF golf cut change?
The use of "MDF" dates to 2008 on the PGA Tour. Going into that year, the PGA Tour changed its cut rule. The change led to an odd result: At some tournaments, a small number of golfers were credited with making the 36-hole cut, yet were not allowed to play the third and fourth rounds. Those golfers received FedEx Cup points and were paid as if they had finished 72 holes, but—just like the golfers who missed the cut—they went home after 36 holes.
Who is Brent Kelley?
Christian Petersen/Getty Images. Brent Kelley is an award-winning sports journalist and golf expert with over 30 years in print and online journalism. "MDF" is an acronym that sometimes appears next to a golfer's name on PGA Tour leaderboards seen in print or online. Here's what it means:
What is a cut in golf?
A cut is used to determine which players will make it to play into the weekend and, in doing so, will qualify to receive a check from the tournament based on their place of finish.
What is the cut line for PGA?
The standard cut line for a PGA event after two rounds is the score of the 65th lowest scoring professional. Any players that finish with that score or better are considered to have made the cut and continue play in the weekend rounds.
How many strokes does a golfer have to cut to make the weekend?
Some events utilize a 10-stroke cut rule, under which any player within 10 strokes of the leader after two rounds is permitted to make the weekend, even if the player ranks worse than 65th. This is primarily used in major tournaments, where the course is very difficult and a player who goes out and shoots a score in the mid-60s can climb through the field quickly.
What does MDF mean in golf?
Professional golf tournaments usually have four rounds of 18 holes each. After 36-holes a cut score is determined. And as a result, players failing to meet the cut line score have an exit from the event. Usually, the top 70 and ties advance over to the week of a professional golfing event.
SHARE THIS ARTICLE
Bazif Qadri is a Golf writer at EssentiallySports. Currently pursuing BSC Economics Hons, Bazif is a golf enthusiast. Not only a fan, but he is also an avid golfer himself.
What is the cut rule for the PGA?
As of the 2019-2020 season, the cut rule is down to the top 65 players and ties, with those players getting to finish out the tournament. Before the 2018-2019 season, the PGA Tour cut rule was to the top 70 and ties after 36 holes. All players could finish the tournament, provided less than 78 players finishing inside the 36-hole cut line.
Does the FedEx Cup have a secondary cut?
The Northern Trust, the one FedEx Cup playoff event with a cut, did not offer a MDF. The secondary cut no longer exists. All players who make the 36-hole cut are paid according to the PGA Tour purse distribution guidance. However, not every PGA Tour event has a 36-hole cut line.
What is the European Tour secondary cut rule?
The European Tour secondary cut rule is also for when 78 or more pros make the cut, making a third-round cut to the top 72 players and ties. Tags MDF PGA Tour 54 hole cut PGA Tour cuts PGA Tour third round cut Rule 78.
How many players made the cut in the Sony Open?
That happened on Saturday at the Sony Open in Hawaii. After 87 players made the cut on Friday at Waialae Country Club, the field was reduced again after the third round to 74 players, leaving 13 players without a Sunday tee time. However, all is not lost for those players who got the MDF (made cut, didn't finish) treatment.
How many professionals make the second round cut?
When at least 78 professionals (amateurs don't count) make the second-round cut at a PGA Tour event, the secondary cut kicks in, reducing the field after three rounds to the number nearest 70 as possible for the last round.
How to Cut MDF by Hand
If you just need to cut one or a few pieces of medium-density fiberboard, then you may as well do so by hand. Let’s jump into the step-by-step process. If you need to cut quite a few pieces, jump to the next section.
4 Best Power Tools for Cutting MDF
What is important to note here is that there are tons of different power saws that you can use for cutting MDF, but with that said, what really matters here is the blade that you use. MDF contains a whole lot of glue and that can make it somewhat tough to cut, so you do need an extremely sharp and durable blade.
Mistakes to Avoid, Tips & Tricks
Lastly, here are a few things to keep in mind before you get started with the task:
Summary
Although cutting medium-density fiberboard is not the easiest task in the world, it’s definitely not the hardest either. As long as you have the right tools and follow the correct procedures, you should not have any problems accomplishing this task.