How to Shorten Golf Clubs
- Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
- Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ...
- Wrap masking tape around the area of the shaft that will be cut. The tape will keep the end of the shaft from splintering as you cut.
- Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual.
- Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight.
- Insert the pointed end of a golf tee into the hole at the end of the new grip. ...
- Place the grip over the end of the shaft and push it down before the solvent dries. ...
How to cut golf clubs and regrip them at home?
Regripping Your Golf Clubs at Home – The Complete Guide
- Remove Your Old Grips. In order to save time and increase efficiency, the best way to regrip your clubs is to complete each task in an assembly-line fashion.
- Remove Tape. The next order of business is to remove the old tape. ...
- Apply the New Tape. Now it’s time to put the new tape on the end of the shaft. ...
- Applying the Grip. ...
- Clean Up and Let it Set. ...
How do you extend the length of a golf club?
This includes:
- The various types of clubs and the ideal length that each should come with.
- A step by step process of determining the perfect length of your club.
- Assessing and understanding your handicap
- Defining your swing speed
- Determining the right flex for your clubs
- Getting the right clubs for your loft
How to reshaft a golf club?
Update Your Golf Club With a New Shaft
- Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. ...
- Measure the shaft tip. ...
- After the tip has been trimmed, abrade or roughen the shaft tip. ...
- Align the shaft graphics the way you want them by rotating the shaft. ...
- Position the club in the normal playing position. ...
How do they lengthen golf clubs?
What-If Standard Sized Irons Are Not Fit for You
- Method 1. It is the method that is the most used by the golfers. ...
- Method 2. ...
- Method 3: Long Drivers of America Method (LDA) The club length is also measured by the Long Drivers of America (LDA) method. ...
- Method 4: Using Measuring Instruments. ...
- Method 5: The United States Golf Association (USGA) Method. ...
How much does it cost to shorten golf clubs?
How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs. If you're looking to save your old grips, you won't have to pay for new grips, but you'll have to pay a save grip fee of around $10 per club.
Is it bad to shorten golf clubs?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
How do I shorten my golf clubs?
When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.Use a utility knife to cut the side of the existing grip.More items...
Can you change the length of golf clubs?
To avoid cutting the shaft or adding an attachment, purchase a new shaft at your desired length. Cut the ferrule and remove the clubhead from the old shaft as you did before trimming the tip. If you wish to keep the original grip, use an air compressor to separate it from the old shaft, then pull the grip off.
Do shorter golfers need shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
How long should golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Can golf irons be shortened?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
Should I shorten my long irons?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
Can I cut my irons to one length?
1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.
What happens if golf clubs are too long?
5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.
What size golf clubs should a 5 foot woman use?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How long does it take for a metal shaft to cool?
Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
Measuring Your Golf Clubs
The easiest way to tell whether your golf clubs are too long is to measure them.
When Would You Need To Shorten Golf Clubs?
It’s evident that shortening your golf clubs is important if you intend to use them yourself and while a lot of people will have their golf clubs fitted, some opt to purchase second hand clubs.
How To Shorten Golf Clubs
If you have determined that your golf clubs need to be shortened then you’re probably eager to get the job done as quickly as possible so that you can get back onto the course.
Standard Golf Club Lengths
The lines have been blurred around standards in golf equipment over the years as new technologies have emerged. It is rare to find a “standard” anymore for things like golf shaft flex, golf ball construction, or any other number of metrics in golf equipment.
Should Your Clubs Be Shortened?
Determining if your golf clubs are too long – and therefore need to be shortened – is a detailed process.
How to Shorten a Golf Club
The process of shortening a golf club is a straightforward process and can be done by anyone with the correct tools and knowledge. NOTE: for best results, this process should only be completed by a certified golf club fitting professional.
Considerations
While shortening a golf club is a relatively easy process once you know the steps, it should be done by an experienced club builder or golf club fitter for best results. However, over time you can learn the steps needed for this golf club alteration, which can be helpful if you plan on playing golf for many years.
How does shortening a golf shaft affect swing weight?
Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
How many swingweight points do you lose when you remove 1/2 inch?
For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
How to tell if a golf club is too long?
Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How long is a standard iron club?
Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.
How long is a golf driver?
On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How long is a three wood putter?
Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.
Do beginners need to size their golf clubs?
These are questions many newbies have but don’t know the answer to. Beginners usually struggle with sizing their golf clubs correctly. Unfortunately, when it comes to clubs, size is very important. In fact, the right size of clubs can significantly improve your game, while the wrong size of clubs can negatively impact your performance, ...
Why shorten a golf club?
A short golf club is expected to give you better accuracy and control of the ball, while the long club gives you more distance.
What happens when you shorten a golf club?
When you shorten your club, there are a few things that happen. First, the club becomes stiff and loses flexibility. It will require you to use more swing speed to hit like before. Short clubs have lower swing speeds, and this makes it hard to achieve long distances.
What percentage of golfers do not use standard length clubs?
What will surprise you is that about 90 percent of golfers do not use standard-length clubs. It is a marketing technique for them to sell you more expensive custom fit clubs. We hope that you now have a better understanding of the effects of shortening your golf clubs.
Why does my golf club become lighter?
The golf club becomes lighter due to the weight loss, and the remedy is adding more weight using lead tape so that you do not overpower the club.
Why are short golf clubs better than longer golf clubs?
When you use a shortened club, you will realize that you have more authority against the driver because of the reduced flexibility. The clubs are also lighter and stiffen up a little bit.
Why is it important to have a shorter golf club?
While a shorter club may reduce your distance or yardages, it comes with several advantages . To some golfers, these are their desired accomplishments, while to others, they are added benefits to what they expected. Most golfers are on a mission to better their performance and, while at it, enjoy the game as much as they can.
Why do manufacturers recommend long clubs?
Manufacturers advocate for long clubs because they offer better distances, but the sad reality is that their accuracy is usually off for most golfers. With short clubs, you are likely to improve your accuracy, which is the most important aspect when trying to improve your performance.
