How to Adjust a Golf Club Length
- Lengthening Effects. Lengthening a club gives you a longer swing and, potentially, a faster swing speed. The increased...
- Trim the Shaft. After you've decided to trim the shaft, consider whether to trim the tip or the butt end. Remove the...
- Lengthen a Club. Extend your steel or composite shaft up to 2 inches by adding a piece onto the...
What is the proper club length adjustment for a golfer?
For instance, for a golfer with a height of 6’3″ and a wrist to toe measurement of 39″, the proper club length adjustment would be ½”. It means that ½” should be added to the standard golf club to make it perfect, considering his height and wrist-to-toe measurements. The fitter can do more to make the measurements even better.
How to measure your height for golf clubs?
There are disparities in using the height alone as a measure for golf club length adjustment. For the measurements to be more accurate and diverse, combine the height measurement with the wrist-to-toe measurements. With this measurement, you will get a more precise length for your golf club.
How should golf clubs be fitted?
Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths. The three dynamics to use when adjusting the length are your overall height, the height between your wrist and toe and how you swing the club.
How to cut a golf club to size?
Cut the club at the desired length. Using the hack saw, carefully cut the club where you marked it. Be sure keep fingers away from blade for your safety.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How long should my driver be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How much does it cost to lengthen golf clubs?
How much does it cost to lengthen golf clubs? On average, it will cost $8-9 per club plus the cost of a new grip to lengthen your clubs. If you're looking to save your old grips, you'll avoid the cost of new grips, but you'll have to pay a save grip fee of around $10 per club.
Can you extend golf club lengths?
We recommend using a steel extender to extend a steel shaft. Using other materials may lead to premature breakage. Wooden dowels can also be used to extend steel shafts, but these require much more work (in our opinion) than using steel extenders.
How do I know my driver length?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.
What club length do I need?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
Should short golfers use shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
Does lengthening a golf club change the lie angle?
The lie angle will automatically change if clubs are lengthened. Only slightly but it will change. There is no such thing as standard lie as all the manufacturers generally are different. The lie angle that is correct for you can only be tested dynamically - i.e. via a pro or fitter on a lie board hitting golf balls.
How much does it cost to cut a golf shaft?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
How do you add 1/2 on a golf club?
5:529:01Extending Golf Shafts 1/2 Inch | How to at home! | Simple - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then simply take your golf club and the extension. And insert one into the other. And twist itMoreAnd then simply take your golf club and the extension. And insert one into the other. And twist it down until you have no gift between the shaft and the extension itself and that will then rest.
How can I extend my shaft?
1:1414:42Golf Club Repair - How To Extend a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe are going to talk about the graphite first then the steel rule of thumb in the McGowan. LikeMoreWe are going to talk about the graphite first then the steel rule of thumb in the McGowan. Like material for like extension meaning that you have a like that's a graphite extender.
How do you install a golf shaft extender?
0:562:35How To Install Graphite Shaft Extenders - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto the butt end make sure it's nice and snug. And then we're ready to do our next assembly stageMoreInto the butt end make sure it's nice and snug. And then we're ready to do our next assembly stage which is to epoxy it into the shaft. Just want a good even coating.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
Can a golf fitter ask you to swing a golf club?
The fitter can do more to make the measurements even better. In step two above, we note that the fitter can ask you to swing a standard golf club to understand your posture and how you swing the club. The measurements are necessary for coming up with the correct plus or minus adjustments.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How long does it take for a metal shaft to cool?
Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
How to measure for golf clubs?
To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.
How many miles per hour do you swing?
It'll be difficult to do at home. In general, though, most amateurs fall somewhere in the neighborhood of 80–85 mile (129–137 km)-per-hour swings. In general, people with faster swings prefer stiff shafts on their woods and iron shafts on the irons.
Why do people buy off the rack golf clubs?
In fact, players with a higher handicap have a game that can be much more drastically improved with the use of custom-fit clubs that help to train the swinging motion properly .
How many yards does a senior flex?
Between 181 to 200 yards (166 to 183 meters), use senior flex. Between 200 to 235 yards (183 to 215 meters), use regular flex. Between 236 to 275 yards (216 to 251 meters), use stiff flex. More than 275 yards (251 meters), use extra-stiff flex. ...
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How to tell if a golf club is too long?
Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.
How long is a standard iron club?
Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.
How long is a golf driver?
On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How long is a three wood putter?
Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.
Why is dynamic fit measuring more reliable?
The dynamic fit measuring technique is more reliable because the measurement is taken as a player swings a club with the help of a launch monitor. A launch monitor is used to determine the correct head and shaft that will best suit the golfer’s playing style.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
What is the most important factor in creating distance with the driver?
However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
Does a longer shaft mean faster club head speed?
A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.
How does lengthening a shaft affect swing?
Timing and Feel. In many ways, the biggest effect of lengthening a club shaft is how it affects your ability to swing the club. The combined changes in length and swing weight make the club feel different. In turn, these changes will affect your timing and even your mechanics, perhaps without you even realizing it.
What does swing weight mean?
Swing Weight. Swing weight isn't an actual weight so much as a comparison of the difference in weight between the club head and the butt end of the shaft. It's expressed as a letter-number combination, such as C9 or D2. Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy ...
Can you add extenders to your golf shaft?
You may add extenders to your existing shafts or you may replace your existing shafts with longer ones. The effects can be very different. Tom Wishon has written extensively about the effects of changing shafts in "The Golfsmith Practical Clubfitting Program" guide.
Does lengthening the shaft make the club head heavier?
Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.
Does lengthening a golf club shaft affect accuracy?
Accuracy. As a general rule, lengthening any club's shaft will reduce your accuracy with that club. The longer the club, the more difficult it becomes to hit the ball solidly. This is especially true when the ball is on the ground rather than on a tee, since hitting the ball fat is more likely.
Is shaft length a factor?
Shaft length is certainly a factor in how far you hit a given club. However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.
Do golf clubs have longer shafts?
Effects of Lengthening a Golf Club Shaft. Tall players like Bubba Watson have to use longer shafts in all of their clubs. Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts.
