As long as the clubs are dirt and debris-free, let them weather naturally. Use a copper polish such as Noxon or Nevr-Dull. Ping specifically shuns the recommendation of chemicals on their copper irons, but as long as you wash with soapy water and dry the clubs after application, the chemicals shouldn't harm the club head.
What's the best way to clean a copper head golf club?
Use a copper polish such as Noxon or Nevr-Dull. Ping specifically shuns the recommendation of chemicals on their copper irons, but as long as you wash with soapy water and dry the clubs after application, the chemicals shouldn't harm the club head.
How do you take care of your Ping clubs?
As long as the clubs are dirt and debris-free, let them weather naturally. Use a copper polish such as Noxon or Nevr-Dull. Ping specifically shuns the recommendation of chemicals on their copper irons, but as long as you wash with soapy water and dry the clubs after application, the chemicals shouldn't harm the club head.
Can you use chemicals on Ping's copper irons?
Ping specifically shuns the recommendation of chemicals on their copper irons, but as long as you wash with soapy water and dry the clubs after application, the chemicals shouldn't harm the club head. Linda Emma is a long-standing writer and editor.
Are Ping Eye 2 Beryllium copper irons still available?
The Ping Eye 2 BeCU irons are not being produced anymore, but there are plenty of them around if you are still interested in trying a set out. Now that you have the details on how to clean them properly, you can make sure that even a used set looks great. What Made Beryllium Copper Golf Clubs Stand Out?
How do you clean Ping Eye 2 irons?
1:509:27Magic! Easy Steps to Restore Your Ping Eye2 Beryllium Copper IronsYouTubeStart of suggested clipEnd of suggested clipAnd like i said all you need is that lemon juice with the salt in it i already have it mixedMoreAnd like i said all you need is that lemon juice with the salt in it i already have it mixed together and ready to go.
How do you shine copper golf clubs?
Dip a club brush or toothpaste in the bucket of soapy water. Scrub the grooves of your club to remove dirt and debris. If the dirt won't come loose, soak the club head in the soapy water for 10 minutes and then try scrubbing it again.
How do you refurbish a Ping Eye 2 iron?
13:3819:00I Try To Restore Copper Ping Eye Irons Pt. 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust use any anything good that should work just fine. So for this process i'm just going to get aMoreJust use any anything good that should work just fine. So for this process i'm just going to get a good amount.
How do you clean a copper Ping putter?
0:263:44CLEANING A PING ANSER PUTTER IN COCA-COLA - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet a nice little bottle of coca-cola. And we're gonna pour it.MoreGet a nice little bottle of coca-cola. And we're gonna pour it.
Are copper irons good?
Beryllium copper is said to be the greatest material ever used for golf irons. The copper supposedly provides an unrivaled feel and performance compared to its counterparts. In this article, we will take a look at beryllium copper irons and uncover the truth behind the myths.
How long do you leave golf clubs in Coke?
Pour the Coke into the bottom of the bucket on the club heads. When the Coke settles down, you will want it to soak for several hours. Letting the golf clubs soak for at least four hours or so will give the Coke time to work cleaning the rust off the clubs without you having to scrub them.
How do you clean PING golf clubs?
1:587:28How to clean your golf clubs I Tips & Tricks I Golf Monthly - YouTubeYouTubeStart of suggested clipEnd of suggested clipGive it a little rinse. And crucially give them a dry you don't want to leave your golf clubs wet.MoreGive it a little rinse. And crucially give them a dry you don't want to leave your golf clubs wet. They get rough spots on them.
How can I tell how old my PING irons are?
Contact the Ping Consumer Relations Department by phone at (800) 474-6434 or through an online contact form available on the company's website. Provide the serial number to the representative, who will be able to find the manufacturing date and any other specifics regarding the club.
How do you refurbish a golf iron face?
0:004:48How to Recondition the Club Face - DIY Golf Club Restoration - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little moreMoreSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little more durable than just masking tape i'll probably put that just on the edges.
How do you clean a tarnished putter?
0:332:29Cleaning a Vintage Ping Putter with Brasso - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor brass copper stainless chrome aluminum pewter and bronze precious Potter's at least one of thoseMoreFor brass copper stainless chrome aluminum pewter and bronze precious Potter's at least one of those things.
Are Ping putters still good?
3:558:05Are Ping putters still GOOD!? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo far does that that's pretty cool in it. And check that out. So if you like to pick your ball upMoreSo far does that that's pretty cool in it. And check that out. So if you like to pick your ball up it just fits in the bottom you scoot your finger in you get your ball out and you're good to go.
What are Ping putters made of?
Ping made Watson two new PLD Anser putters, and both are made of Damascus steel, a material that originated in the Middle East and was used to make swords and knives. As it is produced, Damascus steel takes on flowing lines and waves that give it a wood-like appearance.
How do I get the shine back on my golf clubs?
0:551:57How to Polish Golf clubs at Home | Best Way Clean Polish Golf ClubsYouTubeStart of suggested clipEnd of suggested clipThree polish your golf clubs using metal or car polish and a soft cloth. Let the Polish sit for aMoreThree polish your golf clubs using metal or car polish and a soft cloth. Let the Polish sit for a minute before completely wiping it away with a different cloth.
How do I make my golf clubs shiny?
Apply steel of chrome polish Using a rag, apply a steel or chrome polish to the club and rub it. Put a little pressure while making small swirls. After polishing, let it dry again for few minutes, and rub again with another soft and clean rag. You'll see how it becomes shinier.
Is it OK to polish golf clubs?
Keeping your clubs clean will keep them playable for years. Polishing your golf clubs should be a standard part of your golf club maintenance routine. Polishing golf clubs not only improves the cosmetic appearance of golf clubs, but it also protects the clubs against environmental factors such as dirt and water.
How do you make used golf clubs look new?
Vinegar and Lemon Juice. Similar to Coca-Cola, the acidity of Vinegar and Lemon Juice works to break down and remove rust. A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
How to clean a golf club head?
Dip a club brush or toothpaste in the bucket of soapy water. Scrub the grooves of your club to remove dirt and debris. If the dirt won't come loose, soak the club head in the soapy water for 10 minutes and then try scrubbing it again.
How to clean a golf club with soap residue?
Dip a rag in the soapy water and clean the rest of the club head, the shaft and the grip. Take a rag and dip it in warm water to ensure you get all of the soap residue off the club.
How to clean golf clubs?
Cleaning the clubs keeps them hitting well and looking fine against the green. Use a golf brush to remove sod from the head's grooves and assure the best performance from the club. Wash club heads with soapy water after each use. Dry thoroughly.
Can you use copper polish on ping irons?
Use a copper polish such as Noxon or Nevr-Dull. Ping specifically shuns the recommendation of chemicals on their copper irons, but as long as you wash with soapy water and dry the clubs after application, the chemicals shouldn't harm the club head. Linda Emma is a long-standing writer and editor.
How to clean a golf club shaft?
Stand a club in the bucket, clubhead first, and dip a rag in the soapy water. Slide the rag up and down the club's shaft to remove dirt and other matter from the shaft.
Why do you need to clean ping irons?
Cleaning golf clubs offers more than aesthetic benefits; when the clubfaces are clean, they make better contact with the ball.
What is the most important step in cleaning golf clubs?
This is the most important step in cleaning your clubs — removing all dirt and debris from the grooves. Grooves that are filled in with caked-on dirt and debris won't perform as intended; they will lose some grip on your golf ball, which can make the ball do funny things.
How to clean grooves on golf clubs?
About.com Golf. After a couple minutes of soaking time, take each club in turn and use an old toothbrush (or other soft, plastic-bristled brush) to clean out the grooves on the clubface. This is the most important step in cleaning your clubs — removing all dirt and debris from the grooves.
Do it yourself golf clubs?
Or you can simply gather up a couple household items that you probably already have handy. And the do-it-yourself method won't cost any money . Cleaning golf clubs is a simple process, and it's important to do it periodically to prevent the build-up of gunk that can lessen the effectiveness of your clubs, and to prevent rusting or any possible ...
davie147
Just wondering is there anything i can use on ping eye 2 berylliums to bring them bag to there original shiny copper look? What about copper/brass cleaner or something?
TheFlyingWASP
Please, please, please do not polish your BeCu Eye 2's. They were intended to patina to that beautiful, rich, copper brown color. Don't undo 30 years of ageing by squirting some BrassO on them. Leave them alone. Brown is beautiful!!!
TheFlyingWASP
Nooooooooo!!!!!! Don't do it!!!!! No diet coke, no lemon juice. Let them be how God & Karsten intended them to be.
Buzzkill
Don't listen to the folks about leaving the patina - it doesn't take long for it to return. Anyway, I used to cleaned/brighten mine up all the time. I'm trying to find the product - give me a moment.
TheFlyingWASP
The product you're probably thinking of is bar keepers friend. It's less harsh than Brasso or some other metal polish, but I still wouldn't do it. If you HAVE to, try the coke thing overnight, as it only takes SOME of the patina off, but not all. It shines them up a bit w/ out making them look like a pot my wife just bought at Williams Sonoma.
halliedog
I think some of these guys have been watching too much "Pawn Stars". If shining like a new penny suits your eye, go for it.
Nessism
Bar Keepers Friend (oxalic acid) will do it, but it takes some time and scrubbing. Vinegar should do it, or CLR which is phosphoric acid. I have a gallon of Metal Prep (sold at Home Depot) which is phosphoric acid, and it will eat off the patina in no time. Great stuff.
