- Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
- Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
- Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
- Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
- Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...
What equipment do I need to dye a golf disc?
Shaving cream: shaving cream is used as it helps holding the dye in position while it is soaking into the golf disc Skewers: anything long and pointed can be used here. Skewers are best as they can be used for mixing the shaving cream and outlining designs
How do you dye discs?
I set up my disc dyeing station near a sink and cover with towels. Pie tins work great to hold the discs. I recommend wearing gloves! The pie tins under the discs catch the dye that spills off the edges to help avoid a mess. Pie tins are also my container of choice when I’m doing a shaving cream dye.
What is the best worm dye for disc golf?
A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.
Is disc dyeing hard to learn?
Disc dyeing is a skill that can be developed over time. If you are a newbie, chances are you cannot produce a nice result right away. But, the more you practice and keep on doing it, your skill will be improved in no time. My advice to you aside from reading materials and learning from videos, look for someone who is good at disc dyeing.
What color discs are best for disc dye?
How many colors are in a disc golf starter set?
What do you need to mix dyes?
Why is heat important in dyeing?
Is disc golf thriving?
Do you have to have a new disc?
Can you dye without silicone oil?
See more
About this website
How do you dye a disc golf disc at home?
2:095:55Disc Dyeing 101: The Shaving Cream Method - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plasticMoreTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plastic cups with shaving cream. Pour a little of the powdered. Into one of the cups filled with shaving.
What do I need to dye my discs?
In disc dyeing, the general idea is to use a medium—be it shaving cream, lotion, glue, or a number of other materials—to embed a synthetic dye into the plastic of a disc. The use of multiple layers and vinyl stencils allows for a huge range of possibilities.
How do you color a disc golf?
6:2328:31HOW TO DYE A DISC - What You Need and What You Need to KnowYouTubeStart of suggested clipEnd of suggested clipBut I'll show you how I do it but let's take a look at the dye I'm using only have three colorsMoreBut I'll show you how I do it but let's take a look at the dye I'm using only have three colors currently. It is rip dime or synthetic now really old-school viewers might remember my old electrical
Can you dye colored disc golf discs?
White discs are best when first starting disc dyeing as they take the color of the dye most easily. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, and the more unpredictable your results will be.
What is the best dye for disc golf discs?
What is the best disc golf dye? I've tried a number of dyes including Rit Dye and Indigo but I prefer iDye Poly above all others. Fishing lure worm dye is also a good choice if you're trying to achieve bright or neon colors. Make sure you're using Poly otherwise it will be difficult to get the dye to hold.
How long should disc sit in dye?
Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
Can you paint disc golf discs?
Paint will make the discs illegal for PDGA tournaments. If you don't play tourneys then paint is the way to go. If you play tourneys you need a new disc, mah friend.
Can you use Rit dye to dye disc golf discs?
"For those of you who have missed our old formula that dyed golf balls, golf discs and lacrosse heads, Rit DyeMore once again allows you to dye these items bright, beautiful colors. And it can dye your 3D printed creations too."
How do you dye a disc golf disc with shampoo?
14:3623:06Shampoo and Conditioner Beds with The Disc Golf Nerd - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow none of these shapes or anything are going to be held in this in this bed. The shampoo. It'sMoreNow none of these shapes or anything are going to be held in this in this bed. The shampoo. It's just going to dissolve. And it's going to swirl all over the place once the disc is down in here.
How long does it take to dye a disc golf disc?
Remove Disc after 8 hours or as long as 24 hours to allow for color to set. The longer the disc sits in the shaving cream dye bed the more saturated the colors will be!
How do you hot dye a disc?
0:527:58Disc Dyeing Tutorial (hot dipping, nebula dyes) - Spawn Disc - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the stuff that you'll get to see in this tutorial hot dip mania clear glue nebulas I've spin likeMoreSo the stuff that you'll get to see in this tutorial hot dip mania clear glue nebulas I've spin like awesome fades glue masking over in the making the crazy little hairs.
How do you use shaving cream to dye a disc?
1:2810:33HOW TO DYE DISCS Shaving Cream Swirl Disc Golf Nerd - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can do whatever you want just keep in mind the colors might blend together. So you want to makeMoreYou can do whatever you want just keep in mind the colors might blend together. So you want to make sure that you're not going to be creating browns. And stuff look into the basic color wheel.
Do you need acetone to dye discs?
6:2638:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipIf you put acetone. Directly into a plastic container. From what i understand it is very likely thatMoreIf you put acetone. Directly into a plastic container. From what i understand it is very likely that it could melt through that. So definitely want to be careful with acetone as well it's flammable.
How do you use lotion to dye discs?
0:131:53Lotion Dyeing Method | ARIA Disc Dye - YouTubeYouTubeStart of suggested clipEnd of suggested clipFun when laying down your disc make sure you press down in the middle of that disc just so you don'tMoreFun when laying down your disc make sure you press down in the middle of that disc just so you don't get any air bubbles in the middle. And then push the rest of the disc down into the lotion.
How long does it take lotion to dye discs?
Let the die set for 2 1/2 to 3 hours or more for darker dyes, less time if you wish for a lighter look. Rinse the disc off in the sink and enjoy your new disc!
How do you use shaving cream to dye a disc?
1:2810:33HOW TO DYE DISCS Shaving Cream Swirl Disc Golf Nerd - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can do whatever you want just keep in mind the colors might blend together. So you want to makeMoreYou can do whatever you want just keep in mind the colors might blend together. So you want to make sure that you're not going to be creating browns. And stuff look into the basic color wheel.
Best Dye for Disc Golf
DiscGolfWarrior.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. As an affiliate, this website earns from qualifying purchases.One of the major frustrations for disc golfers everywhere is the lack of choice involved […]
What is the medium used to dye disc golf?
The medium is the material that will be used to mix with the dye and is considered as the “bed” which will be used in transferring the dye to the disc. There are a lot of disc golf dye techniques that have been developed and I listed some below with the first two, probably the most popular method:
What is the best disc golf dye?
The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.
What discs are good for dyeing?
But what are the best disc golf discs for dyeing? I will highly recommend those discs made with opaque premium plastics such as Discraft ESP and Innova Star. This type of disc will absorb the dye very well and can last for a long time without fading. In fact, this type of disc is the most popular choice in terms of giveaways or gifts to disc golf players.
Why do disc golfers dye their discs?
But why do a lot of disc golf practitioners spend time and resources to dye their discs? What is its importance? For the players like me, it’s all about adding a personal touch to the equipment. Customizing the disc to the player’s style and preference means adding a personal value and possibly help them improve their chances of winning. To others, it’s all about adding a personal flair to the equipment while also showcasing their sense of artistry in dyeing the disc.
What is worm dye used for disc golf?
Through the years, there are a lot of different dyes have been used to create a design in the disc. A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors.
How to clean a shaving disc?
Clean the disc by rinsing it with tap water to remove the shaving cream mixture out of the disc and see the design which has been transferred to the disc during this time.
Can you learn disc dyeing?
Disc dyeing is a skill that can be developed over time. If you are a newbie, chances are you cannot produce a nice result right away. But, the more you practice and keep on doing it, your skill will improve in no time. My advice to you, aside from reading materials and learning from videos, is to look for someone who is good at disc dyeing. This will allow you to learn other techniques and skills from professional dyers.
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.
How to put a golf disc on a plate?
Once you have prepared the design/pattern, slowly put the golf disc on top of it. Gently Push the disc onto the plate
How to get a golf stamp off?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
What is used to hold dye in place?
Shaving cream: shaving cream is used as it helps holding the dye in position while it is soaking into the golf disc
How to avoid air bubbles on a disc?
Wrap the stencil edges tightly around the sides of the disc. Use a hard-edged card like a credit card to rub the places. It will help you avoid air bubbles. The dye can go inside the air bubbles ruining your design
What paper do you use for vinyl?
Vinyl paper: we recommend using Oracal 651; however, if you are getting started with disc dyeing, you can go with Oracal 631, as it is thicker and lenient on mistakes. It can be easily availed from a sign shop
What is the best way to remove stamps from golf discs?
Acetone for removing the stamps and prints off of the stock golf disc. It is advised to use acetone in a well-ventilated area
How to change the color of a disc?
If you want to completely change the color of your disc then go with a bucket or large bowl and submerge the disc as I mentioned above. Submerge the disc and make sure that none of the edges are sticking out which can lead to an odd looking dye job; I know from my experience with an old Champion Coyote. You could also place the disc face down so that only the top of the disc is dyed leaving the underside as is. You may not need any acetone for this method unless you’re dying difficult-to-dye plastic.
What do you put under shaving cream dye discs?
The pie tins under the discs catch the dye that spills off the edges to help avoid a mess. Pie tins are also my container of choice when I’m doing a shaving cream dye. I always have a bottle of clean water for quickly rinsing spills as well as extra towels. It’s also a good idea to keep a knife or pair of scissors handy for projects like these.
How long to leave stencil dye on disc?
I like to leave the dye on the disc for a few hours, but if you’re using the 3:1 acetone mixture that I’ve described above, you may be able to rinse more quickly. You can increase the amount of acetone in the mixture if you are using a stencil dye and need to get the dye off quickly to avoid bleeding.
How to get rid of a vinyl disc?
This phase is simple, just make sure you’ve let the dye sit for long enough. Rinse in cold water for a few minutes. then remove all vinyl, fabric, or hot glue and rinse again. Scrub the disc lightly under running water.
What is adhesive vinyl decal?
Adhesive Vinyl Decal/Stencil Dye – one of the most popular and allows for very personalized designs and images.
What is spin dye?
Spin Dye – one of the most elegant design types, requires a steady hand and spinning equipment. Splatter/Drip Design – Literally squirting or dripping dye on a disc to get a cool pattern. Cloth design – soaking a cloth or other material then letting it sit on the disc and leave a pattern. Shaving Cream Dye – (dry powdered dye is usually best ...
What is the best plastic for disc golf?
Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye. Also remember that the more curved your disc’s flight plate, the more dye drips you’ll experience and the more difficult it will be to place a template or design cut-out.
The Process
A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains!
The Methods
There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look.
The Prep
This may seem like common sense, but always clean your disc before you dye it. Any dirt or grease will affect the end result and leave your disc with imperfections.
Taking Care of Your Dyed Discs (Cleaning)
Cleaning your disc is simple, but just make sure you’ve left the dye on for long enough first.
ABOUT THE AUTHOR
Hi, everyone! My name is James, and I love sharing what I’ve learned about disc golf. It struck me as odd that such an amazing sport could be overlooked by so many people. To help spread the joys of disc golf and to provide some useful tips for improvement, I created the Disc Golf Mentor website. Thanks for stopping by!
What color discs are best for disc dye?
White discs are best when first starting disc dyeing as they take the color of the dye most easily.
How many colors are in a disc golf starter set?
PRO Chemical & Dye makes a dye starter setspecifically for disc golf that includes six colors for $12. The dye comes in powder and will be mixed with the Floetrol. Beyond the starter set, they currently offer over 30 additional colors.
What do you need to mix dyes?
In order to mix your dyes, you'll need something to measure liquids and dye powder with.
Why is heat important in dyeing?
Heat is instrumental in speeding up the dyeing process and assuring vibrant colors.
Is disc golf thriving?
It’s no secret that the sport of disc golf is thriving. For example, our 2020 Growth Reportshowed that the numbers of disc golfers increased by about 250% over that year. And as the population of disc golfers has grown, so have the numbers of those interested in customizing their equipment through disc dyeing.
Do you have to have a new disc?
Your disc doesn't have to be new. In fact, it's probably a great idea to experiment with a used disc you care little about. Just make sure the disc is clean.
Can you dye without silicone oil?
This technique is more advanced. You may want to try your first dyes without silicone oil and experiment with it once you've had success without it.
About The Tutorial
- Here's everything you'll need to dye your first disc golf disc: 1. A disc 1. White discs are best when first starting disc dyeing as they take the color of the dye most easily. 2. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, an…
Setting Up The Dye
Stencil Dyeing
Shaving Cream Dyeing
Final Words
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
The Process
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
The Methods
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
The Prep
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.
Let’s Get to It!
- A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains! Before you begin, know exactly what design you want and have your design setup ready to go. An ideal set up would be pie tins under the disc to catch all the die that spills off th…
Taking Care of Your Dyed Discs
- There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look. Below we’ll take a look at some of the most popular methods for dyeing discs. Adhesive Vinyl Decal/Stencil Dye:An incredibly popular method, this method lets you really put y…