- Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
- Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
- Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
- Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
- Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...
What equipment do I need to dye a golf disc?
Shaving cream: shaving cream is used as it helps holding the dye in position while it is soaking into the golf disc Skewers: anything long and pointed can be used here. Skewers are best as they can be used for mixing the shaving cream and outlining designs
How do you dye discs?
I set up my disc dyeing station near a sink and cover with towels. Pie tins work great to hold the discs. I recommend wearing gloves! The pie tins under the discs catch the dye that spills off the edges to help avoid a mess. Pie tins are also my container of choice when I’m doing a shaving cream dye.
How to stencil on a golf disc?
Slowly press down the stencil on the edges of the disc making sure that it adheres to all of the disc Wrap the stencil edges tightly around the sides of the disc. Use a hard-edged card like a credit card to rub the places. It will help you avoid air bubbles. The dye can go inside the air bubbles ruining your design 4. Dyeing the Golf Disc
How do you clean your discs?
Rinse in cold water for a few minutes. then remove all vinyl, fabric, or hot glue and rinse again. Scrub the disc lightly under running water. I let my discs air dry for 15 minutes after this then wash with dish soap to make sure no dye will rub off later, but this may not be necessary.
What kind of dye do you use for disc golf discs?
Shaving Cream Dye By using shaving cream as a medium, this is one of the most used methods to dye disc golf discs.
Can you dye a colored disc golf disc?
White discs are best when first starting disc dyeing as they take the color of the dye most easily. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, and the more unpredictable your results will be.
What can you use to dye discs?
13:3528:31HOW TO DYE A DISC - What You Need and What You Need to KnowYouTubeStart of suggested clipEnd of suggested clipYou can use a plate works out well for most discs but if it's depending on the size that might notMoreYou can use a plate works out well for most discs but if it's depending on the size that might not work like we talked about earlier you can also use like a cheap ultimate frisbee like a dollar store
How do disc golfers dye?
The Process. In disc dyeing, the general idea is to use a medium—be it shaving cream, lotion, glue, or a number of other materials—to embed a synthetic dye into the plastic of a disc. The use of multiple layers and vinyl stencils allows for a huge range of possibilities.
Can you use Rit dye to dye disc golf discs?
"For those of you who have missed our old formula that dyed golf balls, golf discs and lacrosse heads, Rit DyeMore once again allows you to dye these items bright, beautiful colors. And it can dye your 3D printed creations too."
How do you dye a disc a solid color?
Mix your dye, pour it in the upside down ultimate disc, place disc on top of dye (it should be floating), wait overnight, remove dyed disc, syringe out dye and place back into mason jar for future use.
How long should disc sit in dye?
Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
How long does it take lotion to dye discs?
How long do you let the disc sit in the bed? This really depends on a couple of different factors. Mainly what type of plastic are you dyeing, and what type of dye or dye mix are you using. A very general answer is about 8-12 hours for Star-like plastics and 24-48 hours for Champion-like plastics.
How do you glue dye to discs?
7:1838:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipSo dropper bottles powdered dye once again you don't really need to measure them i would just put aMoreSo dropper bottles powdered dye once again you don't really need to measure them i would just put a nice coating of it on the bottom there fill it up with acetone.
How do you use lotion to dye discs?
0:131:53Lotion Dyeing Method | ARIA Disc Dye - YouTubeYouTubeStart of suggested clipEnd of suggested clipFun when laying down your disc make sure you press down in the middle of that disc just so you don'tMoreFun when laying down your disc make sure you press down in the middle of that disc just so you don't get any air bubbles in the middle. And then push the rest of the disc down into the lotion.
How do you use shaving cream to dye a disc?
1:188:25How to Dye Your Disc Golf Discs Shaving Cream Method! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need a basic acetone as well like I mentioned some shaving cream and I dye poly and with the IMoreYou need a basic acetone as well like I mentioned some shaving cream and I dye poly and with the I die poly. You're only going to be using the powder part of the I dye package.
How long does it take to dye a disc golf disc?
Remove Disc after 8 hours or as long as 24 hours to allow for color to set. The longer the disc sits in the shaving cream dye bed the more saturated the colors will be!
What is the medium used to dye disc golf?
The medium is the material that will be used to mix with the dye and is considered as the “bed” which will be used in transferring the dye to the disc. There are a lot of disc golf dye techniques that have been developed and I listed some below with the first two, probably the most popular method:
What is the best disc golf dye?
The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.
What is worm dye used for disc golf?
Through the years, there are a lot of different dyes have been used to create a design in the disc. A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors.
What does it mean to customize a disc?
Customizing the disc to the player’s style and preference means adding a personal value and possibly help them improve their chances of winning. To others, it’s all about adding a personal flair to the equipment while also showcasing their sense of artistry in dyeing the disc.
Can a disc bleed after dyeing?
Because this type of discs, although they absorbed the dye well, can bleed easily a few weeks after dyeing.
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.
How to get a golf stamp off?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
Do you have to remove stamps from a disc?
In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue.
Can you dye disc golf?
There are several methods to dyeing a disc golf disc, and the art of dyeing has been around for years. If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, ...
The Process
A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains!
The Methods
There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look.
The Prep
This may seem like common sense, but always clean your disc before you dye it. Any dirt or grease will affect the end result and leave your disc with imperfections.
Taking Care of Your Dyed Discs (Cleaning)
Cleaning your disc is simple, but just make sure you’ve left the dye on for long enough first.
ABOUT THE AUTHOR
Hi, everyone! My name is James, and I love sharing what I’ve learned about disc golf. It struck me as odd that such an amazing sport could be overlooked by so many people. To help spread the joys of disc golf and to provide some useful tips for improvement, I created the Disc Golf Mentor website. Thanks for stopping by!
What is the best plastic for disc golf?
Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye. Also remember that the more curved your disc’s flight plate, the more dye drips you’ll experience and the more difficult it will be to place a template or design cut-out.
How to get rid of a vinyl disc?
This phase is simple, just make sure you’ve let the dye sit for long enough. Rinse in cold water for a few minutes. then remove all vinyl, fabric, or hot glue and rinse again. Scrub the disc lightly under running water.
What is spin dye?
Spin Dye – one of the most elegant design types, requires a steady hand and spinning equipment. Splatter/Drip Design – Literally squirting or dripping dye on a disc to get a cool pattern. Cloth design – soaking a cloth or other material then letting it sit on the disc and leave a pattern. Shaving Cream Dye – (dry powdered dye is usually best ...
Can you use squirt bottles for disc golf?
Shaving cream can also help prevent run-off, but again you need to make sure it’s evenly mixed and it can be a little more messy to work with. Basic (and not very exciting) disc golf drip dye. Squirt bottles are best used when you’re interested in an abstract splash or drip design and can be messy if you’re careless.
Can you tie dye a disc?
Soaked fabric can prevent the dye from running off or bleeding through and it can create some neat textures and designs. This method is also great for tie-dying a disc. Of course here you’ll need to make sure the fabric is touching all areas of the disc that need to be dyed and that the fabric is fairly evenly soaked.
Can you dye disc golf plastic?
Very difficult to get a deep color and fade and bleed within weeks. Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye.
About The Tutorial
- Here's everything you'll need to dye your first disc golf disc: 1. A disc 1. White discs are best when first starting disc dyeing as they take the color of the dye most easily. 2. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, an…
Setting Up The Dye
Stencil Dyeing
Shaving Cream Dyeing
Final Words
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
The Process
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
The Methods
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
The Prep
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.
Let’s Get to It!
- A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains! Before you begin, know exactly what design you want and have your design setup ready to go. An ideal set up would be pie tins under the disc to catch all the die that spills off th…
Taking Care of Your Dyed Discs
- There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look. Below we’ll take a look at some of the most popular methods for dyeing discs. Adhesive Vinyl Decal/Stencil Dye:An incredibly popular method, this method lets you really put y…