how do you easure length of golf clubs

How to Measure the Length of Golf Clubs

1. Obtain the proper measuring tool. You will need at least a 48-inch ruler/measuring stick/tape measure in order to measure the length of your golf clubs.
2. Position the golf club. The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground.
3. Place the measuring stick directly behind the golf club. ...

Full Answer

Should all my golf clubs be the same length?

Some sets are made with all clubs the same length as the eight or six iron, but the seven iron is the most popular. You will still need to make sure you get your clubs fitted adequately for you; in fact, it is more important with the one length than with variable length. There are lots of reasons to switch to a one-length iron.

What is the standard length for a golf club?

What Is the Standard Length of a Golf Club?

• Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
• Graphite Vs. Steel. ...
• Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
• Irons and Hybrids. ...

What length golf clubs do you need?

• 3-wood
• 4- and 5-hybrids
• 6- to 9-irons
• Pitching wedge
• Sand wedge
• Driver
• Putter

How to shorten the length of a golf club?

• Remove The Grip
• Remove The Grip Tape
• Measure Twice and Cut Once
• Make The Cut
• File Off Any Lose Edges On The Cut Line
• Place A New Grip On The Club
• Add Weights to balance any change in swing weight
• Go Try Out Your New Shorter Length Club

How are golf irons measured for length?

A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.

How do you measure the length of your golf clubs?

To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.

How long should my golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

Does golf club length include the head?

Measuring different types of golf clubs requires an understanding of what we are actually measuring. In today's terminology, the “length” of a golf club is not the length of the shaft, but the length of the shaft and the club-head combined.

What is the standard length of a 7 iron?

What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.

What is a standard length golf club?

All clubs, including putters, must at least 18 inches long. Putters with straight shafts are measured from the top of the grip to the sole, directly down the shaft.

How do I know if my golf clubs are too long?

The most common way to tell if your clubs are too long is that your back will be too upright, the toe of your club will be off the ground at address, and you will often make contact towards the toe of the club.

How do you measure golf clubs with a tape measure?

Position the end of the measuring stick or tape measure at the end of the grip at the top of the club. Check the measurement at the heel, which is where the sole of the club and shaft form a corner on the club face. A tape measure works well too, but it might be a little tougher since it's flimsier.

What is the standard length of men's golf irons?

For men, the standard length of a 7-iron with a steel shaft is 37 inches and if it has a graphite shaft, the standard length is 37.5 inches. A graphite golf club for women has a length of 36.5 inches while a golf club made of steel features a standard length of 36 inches.

How do you measure club length at home?

0:582:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.

How do I know my driver length?

To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.

How do you measure your wrist and floor for golf clubs?

To determine your wrist-to-floor measurement wear normal shoes and stand on a hard surface with your arms hanging relaxed at your sides. Then have someone measure from the point where your hand meets your wrist (your “wrist crease”) to the floor.

Why is length important in golf?

Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.

Where is the final length measured?

The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...

Why is the ruler not placed in line with the shaft?

Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.

What is the USGA method?

USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.

How to measure golf club length?

Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.

What is the minimum length of a golf club?

The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.

How long should a golf shaft be?

The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.

What does a longer shaft mean?

The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.

How to measure club size with LDA?

The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.

Where is the shaft of a putter located?

It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.

What is the LDA size limit?

It is the reason that the allowable LDA size limit is 50 inches for long driver competitions.

How to measure a golf club?

For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter

How long do golf clubs have to be?

According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.

How to shorten a golf club?

When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.

How to measure a putter shaft?

So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.

How to measure golf club heel angle?

1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...

Can you put a putter straight up?

Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.

Do you need to buy a new shaft for a golf club?

All good-quality golf clubs can be re-shafted. You do not need to buy an entire new club if you need a new shaft. This luxury saves on expense, especially when it is only one club that needs replacing.

Where to place measuring stick on golf club?

Place the measuring stick directly behind the golf club . The stick should make contact with the shaft of the club and be placed on the ground right at the heel of the golf club you are measuring. The numbers on the stick should be pointed toward you so you can easily obtain a reading.

Why measure golf clubs?

You may also need to measure the clubs to ensure that they are regulation length for an upcoming tournament or event. It is important to know the proper way to measure the entire length of a golf club.

How to hold a golf club steady?

The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground. Then, place your hand on the top of the club to hold it steady.

How does a lengthened golf club work?

A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.

What happens if you play too long in a golf club?

If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.

Why are golf clubs made the way they are?

The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.

Why do you have to swoop on your golf club?

Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.

When shortening a golf club, do you have to remove the crown?

When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.

Does golf club length matter?

Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.

Is a wood longer than an iron?

All of your woods are likely longer than all of your irons. While the iron is meant for distance, the wood is meant for height. When you’re standing in position and the ball is directly in front of you, the angle of the wood sends the ball through the air better than any other club type.

What happens if the club is too long?

If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.

What are the problems with driving a golf club?

Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.

What is the average driver length for Rickie Fowler?

Rickie Fowler is known to have used a 43.5” driver length and the Tour average build is 44.5”. Tour players main priority is hitting fairways for days, weeks and months. Shorter driver lengths make it easier to hit with the centre of the face more frequently.

What happens if you have too short of a club?

Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).

What can you use to wipe off golf ball?

You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.

Do all iron heads have the same length?

Not all brands will have the same ‘standard’ length. Not all iron head types within a brand will be the same length. More forgiving heads can justify a longer playing length to encourage faster swing speed. The heads are bigger, blade longer and perimeter weighting is better to maintain ball speed with off centre hits.

Should taller people use longer irons?

Generally speaking, taller people should use longer irons and shorter people should use shorter irons compared to a standard golf club length. Length can be made-to-measure with new golf irons and can be adjusted on your own golf irons. Not all brands will have the same ‘standard’ length.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

What factors affect the size of a golf club?

Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.

Why do manufacturers make golf tables?

Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.

What is plus and minus golf clubs?

The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...

What is the second measurement of a grip?

The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.

Can you play golf with an off size club?

Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.

What does it mean to use the correct size golf club?

When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.

Why is it important to choose the right golf club size?

These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.

Why is it important to know the size of your golf clubs?

This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.

What size golf clubs should I buy for a junior?

Golf club sizes for kids and juniors are shorter than the standard size of standard clubs. For a shorter junior, clubs will range from 20″ to 26″ in length and for a taller junior they will range from 42″ to 30″ in length from driver to putter.

Why are golf clubs so complex?

The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.

How to make your golf swing more efficient?

To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.

Who invented single length irons?

Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.