True professional clubfitters and master club builders understand the importance of “frequency matching”. To find any shaft’s true frequency, the shaft is placed in a clamp with the clubhead dry fit on the end of the shaft. Then the club maker pulls the shaft to make it oscillate.
What are frequency-matched golf shafts?
In a frequency-matched set, the increment of frequency increase is exactly the same from one to the next. Clubmakers including Thomas Golf ( www.thomasgolf.com) offer frequency-matched shafts at no extra charge.
Why is frequency matching important in golf clubs?
Frequency matching improve the progression of butt-end (grip end) stiffness. The stiffness from club to club will be more consistent from longest to shortest clubs in a set. However, the golfer’s set of clubs should be fit properly to the golfer in terms of shaft flex, weight, and bend point.
How do you measure the frequency of a shaft?
To get a shaft frequency measurement, the shaft is clamped at the grip end. The other end (the clubhead end) is pulled down, then released. Then, "the shaft begins to oscillate up and down," Wishon said. "The stiffer the shaft, the faster the rate of oscillation; the more flexible the shaft, the slower the rate of oscillation."
What is the right frequency for your golf swing?
The right frequency for your swing depends on the speed and acceleration of your swing as well as WHEN you release the club (when you stop accelerating). When we discuss frequency, we start out with the shaft frequency.
What is frequency in shaft?
The frequency of a shaft is the number of cycles per minute a shaft will oscillate when one end is fixed (clamped) and the other end is pulled down with a weight attached to it. Ideally a flex (such as Stiff, Regular, or X-Stiff), should correspond to one frequency number.
How is shaft frequency measured?
0:462:24Measuring Shaft Frequency - YouTubeYouTubeStart of suggested clipEnd of suggested clipOver the edge of the shaft. That way everything fits perfectly. And from here. It's just a flick. SoMoreOver the edge of the shaft. That way everything fits perfectly. And from here. It's just a flick. So as this one reads through our first go around it came in at 281 CPM. You want to try to get a view.
How do you use a golf shaft frequency analyzer?
0:453:42Golf Shaft Frequency - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe end of this golf shaft. Once we secure the weight onto the golf shaft is if it were a club. HeadMoreThe end of this golf shaft. Once we secure the weight onto the golf shaft is if it were a club. Head. You can screw that on. Then we're able to put it into this machine.
What shaft is right for my swing speed?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
How do you determine the flex of a golf shaft?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
How is golf shaft flex measured?
There are numerous ways to measure shaft flex. The most common way is to clamp the butt end of the shaft, attach a weight to the tip, displace it, and measure the CPM (cycles per minute) or frequency that the shaft oscillates. This can also be done in reverse – clamp the tip and weight and displace the butt.
What are the mechanics of a golf swing?
The Best Golf Swing is Powered by Mechanics. There are five parts that compose golf swing mechanics backswing, transition, downswing, and impact, and the followthrough. If you focus on each of these aspects you will be able to achieve the best golf swing for maximum results and minimal industry.
What shaft flex should I use for irons?
Determine the Proper Shaft Flex for Your SwingIf You Can Hit 150 Yards with a...Then Your Optimal Shaft Flex Is...6- or 7-IronRegular Flex (R)5-Iron/Hybrid or 4-Iron/Hybrid(Male or Female)Senior Flex (A/M)Any Iron/Hybrid lower than 4 or any Fairway Wood (Females or Juniors)Ladies Flex (L)1 more row•Apr 6, 2022
How do I know if my golf shaft is too flexible?
If the shaft is too flexible, you will have a 'whippy' feeling in your hands, and you won't be able to feel the clubhead on the downswing. When the golf ball is struck it will generally have too much spin if the shaft is too flexible, this will cause a 'ballooning' effect on the shot and it will tend to go quite high.
How do I find the right shaft for my irons?
Distance Control Generally, players are looking for either Distance, Distance and Control, or Control. With regards to the shaft - The lighter the shaft, the longer the overall club length and more flexible the shaft is (within the players flex range), the greater the potential for distance gain.
What is frequency used for in golf?
Frequency can be used to duplicate a favorite iron set in the same manner as when choosing a driver.
Why is frequency important in golf?
It is important to realize that there is no flex standard in the golf industry. Frequency provides an absolute way to measure the stiffness of a shaft. Shafts can then be matched to a player’s swing to improve performance. Frequency offers the ability to duplicate a favorite club, a demo club or a friends’ club that the player hits well.
What is the measurement of the flex of a shaft?
Frequency is an absolute measure of the flex of a shaft. It is defined as how many times per minute a shaft oscillates. The units of frequency measurement are known as cycles per minute, or cpm. A shaft with a higher frequency is stiffer than one with a lower frequency.
What is shaft in golf?
But shafts are an element part of your game. The golf shaft connects you with the club head and transfers massive amounts of energy. This energy in combination with the properties of your equipment causes several movements of the club head in different directions during the course of the swing.
What is 1/4 of the vibration period of a golf club?
Physics tells us that 1/4 of the vibration period of a club is the time it will take for the club head to return to the square position. Working with a club-fitter who can measure the dynamics of your swing (how and when you release and how fast you swing), can help determine what this time period exactly is, and thus what would be ...
What happens during the downswing of a golf club?
But what really matters in the end is the golf club frequency as a whole. At the start of the downswing, you are accelerating the club to gain speed. During this period, the shaft will bend, causing the club head to lag behind your hands and body.
What happens if your club frequency is too high?
When your club frequency (as a whole, not just your shaft) is too high or too low for your swing, then you may experience loss of speed and distance as well as an off-center trajectory path.
How to know if your club head is square?
You can check to make sure your club head is square if you were to draw a line between you feet and the plane of the face of the club is perpendicular with the line at impact. If the face were open or closed, then your swing will likely result in a sideways trajectory. When your club frequency (as a whole, not just your shaft) ...
Why Test Frequency?
We test for frequency, because not all shafts that are marked “stiff” are really stiff. Consequently, not all shafts marked “regular” are necessarily regular. This is true for all of the “stiffness” letter markings. The inconsistency can occur with both graphite and steel shafts, however, it appears more prevalent with graphite shafts.
Frequency Analyzer Machine
A club frequency analyzer measures the stiffness of shafts through what is called “shaft frequency measurement”. This pertains specifically to club oscillation. The stiffer the shaft – the faster the rate of oscillation. The more flexible the shaft – the slower the rate of oscillation.
Frequency Matching a Set of Clubs
The process of “frequency matching” is a straightforward concept. At Better Golf Shot, we can match a new set, or retrofit an old set of clubs.
What is a taper tipped shaft?
Taper tipped shafts, which are used by all of the big manufacturers, are designed to be mass produced and dropped into a particular club’s head and the cut to length i .e. a 9 iron shaft for a 9 iron head. These are difficult if not impossible to match perfectly.
Do two different types of shafts measure at the same frequency?
This, however, does not mean that two different types of shafts which measure at the same frequency will play the same. Shafts have different bend profiles – which means they are stiffer or softer in different areas of the shaft.
Is golf shaft manufacturing imperfect?
Golf shaft manufacturing processes, while having improved by leaps and bounds, are still imperfect. This means that if you go to the local golf retail store and buy a set of “off the rack” clubs and later get the shafts measured for frequency, you will find that the vast majority of those sets will not match.
r7superquad
Is finding the specific frequency though all relative to the type of shaft you are using? I am not looking to compare two different shafts to one another. I am guilty of trying to frequency match a set with a chart of CPM's and lengths that are based on A certain shaft and not a general consensus of what the CPM should be.
r7superquad
Ok, I am slowly beginning to understand the process of how this is done.
Grumpy bumpy
Hi. One of the things that you might be confused with, is that you have parallel tip shafts that are raw length, not Taper tip shafts. with 43 inches of raw length and 11 inches of tip, you are able to achieve 5 different flexes out of these shafts.
r7superquad
Yes, I have a 205 gram tip weight and a 255 gram tip weight that is lead-taped to the MAX. Now, with what you just posted, how do you go about handling the frequencies and different lengths of shafts, even though they might be minor variations? Shortest one used in the shortest iron, say the PW, and the longest in the 6 iron (set is consisting of 6-PW)? When trying to match up frequencies, are you going to have to match up to the highest frequency that exists in the RAW, uncut shafts? Thanks.
BrianL99
My question is: IS IT POSSIBLE TO FREQUENCY MATCH A SET OF STEEL IRON SHAFTS WITH A FREQUENCY ANALYZER?
r7superquad
Ohh, long topic, go to the pinned topic with a flex chart and you will learn a lot more, then ask if any thing is unclear. I think its all in there...?
r7superquad
My question is: IS IT POSSIBLE TO FREQUENCY MATCH A SET OF STEEL IRON SHAFTS WITH A FREQUENCY ANALYZER?
/GettyImages-529798272-58dd3c045f9b584683d09cd2.jpg)