How to measure the length of your driver shaft: Keep the golf club in the playing position such that the center of the sole is in contact with the ground. Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club.
What is the Standard Shaft length of a golf driver?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
How long is a standard shaft on a golf driver?
“The standard driver length of 45.5-46.5 inches offered by the majority of companies is too long for most golfers and will prevent them from achieving their maximum potential for distance and accuracy.” Most driver shafts were around 43 inches until the early 1990s. The stock standard now is anywhere from 45.5 to 46.75 inches.
How to determine the proper driver shaft length?
Methods to Determine Club Length
- Overall Height. The first step in figuring out your proper club length is to start with your overall height measurement.
- Wrist-to-Floor Measurement. ...
- In-Swing Considerations (Dynamic Fitting) The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still.
What is the "ideal" driver shaft length according to height?
Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm. However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face.
How do you measure driver shaft length?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.
How long should my driver shaft be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How do you measure the length of a golf club shaft?
A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
How do you measure driver shaft length at home?
0:522:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
What is standard driver shaft length?
45 to 45.75 inchesAlmost all drivers being introduced by manufacturers now feature a shaft length of 45 to 45.75 inches. Though some manufacturers have introduced drivers with shaft lengths longer than 46 inches, few have been successful.
How do I fit myself for a driver?
There is no better way to reduce a slice than to fit the golfer with a more closed face angle in the driver/fairway woods. For more severe slices, the golfer can be fit with a driver head with both a closed face and an offset hosel design....Driver Loft.DriverBest LoftBest Loft1109.58.5Based on Level Angle of Attack8 more rows•Jan 27, 2012
How are shafts measured?
2:168:36Double E - How to Measure a Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have something you can push against the tape measure as you're pushing against the tape measureMoreYou have something you can push against the tape measure as you're pushing against the tape measure and getting the measurement on the other end of the shaft.
How do you measure golf clubs for yourself?
3:0615:40ARE MY CLUBS THE RIGHT LENGTH? FIND THE CORRECT GOLF ...YouTubeStart of suggested clipEnd of suggested clipStand in normal standing upright posture with your arms at your sides. And you're just going to takeMoreStand in normal standing upright posture with your arms at your sides. And you're just going to take a ruler just a standard yardstick. And you're going to measure.
How long should your golf clubs be if you are 5 7?
2. Get Your Wrist-to-Floor Measurement (once more, “static” fitting)OVERALL HEIGHTWRIST-TO-FLOOR MEASUREMENTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″32 to 34 inchesminus 1/4″5'7″ to 6'1″34 to 37 inchesstandard length in inches6'1″ to 6'2″37 to 38.5 inchesplus 1/4″6'2″ to 6'4″38.5 to 40 inchesplus 1/2″7 more rows
How long should your golf driver be?
around 45 inchesDetermining the best driver length for you. Standard, off-the-rack drivers usually check in around 45 inches, while the USGA limits driver length to 48 inches for its competitions.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
When you shorten your golf shaft, do you keep in mind the after effects?
When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.
What Is Shaft Length?
Shaft length is the shaft’s raw length, which is connected between the clubhead and the grip. It acts like a lever and allows a player to hit the golf ball over a great distance by using the body’s rotation.
Shaft Length in Irons
The optimal shaft length in Irons can be determined by a set of measurements like arm length, player’s height, and swing posture. A tall player would not benefit by using a golf club designed for a short golfer.
Shaft Length in Drivers
The shaft length in drivers helps you determine how fast you can swing the golf club, along with the angle of attack and the club’s path. The standard length for the drivers is 44.5 inches.
Step 1
Lay the golf club on a level surface with the toe of the golf club pointed up.
Step 2
Place a protractor against the golf club head on the level surface, verifying that the sole of the club head is positioned at a 60 degree angle to the flat surface.
Step 3
Draw an imaginary line following the sole of the club at the 60 degree angle to where it intersects with a flat surface.
Step 4
Measure from where the intersecting line meets the flat surface at the heel of the club, along the shaft and to the tip of the grip.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
What is the most important factor in creating distance with the driver?
However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
