Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
How do you measure a golf club?
Length and Height Measurement for Custom Golf Clubs
- Height measurement There are aspects in height measurement that need consideration. ...
- Swinging a standard golf club This step is crucial and needs the utmost seriousness if you need your custom golf club. ...
- Presenting your handicap
How to size golf clubs for better performance?
- Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
- Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
- Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...
What is the length of a 5 iron golf club?
There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long. We cannot stress enough, the importance of a golf club’s length and its effect on your performance.
How do I get measured for golf clubs?
- Take some tape and cover the grip from the tip to the butt.
- Now, make several markings on the tape at a distance of half an inch from each other.
- Step out to the golf range and start hitting your shots from the different lengths that you have marked. ...
- Based on this, you may want to adjust your sand wedge and other golf clubs. ...
How do I know what length my irons should be?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
What is the standard length of a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
How do I determine my golf club length?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.
What is the standard length of irons?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches.
Are golf irons different lengths?
Within each set, golf clubs have different lengths to facilitate the various functional requirements in the game of golf. Between golf club sets, there are also length differences to accommodate player height variations. While tradition favors variable-length clubs, you can now buy set with single-length irons.
What is the standard length of an 8 iron?
The standard club length of an 8- iron is between 35.5” to 37”.
What is the standard length of a 6 iron?
The Complete Golf Club Length ChartGOLF CLUBLENGTH FOR MEN (steel/graphite shaft)LENGTH FOR WOMEN (steel/graphite shaft)4-iron38.5/39 inches37.5/38 inches5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches23 more rows
What is a standard length golf club?
Standard Club LengthClubMen GraphitLady SteelIron 6#3836,5Iron 7#37,536Iron 8#3735,5Iron 9#36,53528 more rows
How do you measure shaft length?
Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.
How do you know if your golf clubs are too short?
6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.
How to measure golf clubs?
This is how we measure our clubs at Hireko. A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club’s heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
What is the best way to measure club length?
Regardless of the method one uses, the key is consistency. This is why there are jigs or fixtures for measuring club length. A prime example would be a product that Hireko offers called the Dynacraft Bench Ruler Soleplate works in conjunction with a 48” aluminum ruler and can be laid flat on a table or workbench. There is a roll pin that the bottom of the club’s sole rests against. This is a rather inexpensive item that can speed up and accura
How to measure putter length?
For putters, length can be measured a number of ways because of the position of the hosel and/or golf shaft in relationship to the heel. As mentioned before, the length on heel-shafted putters can be measured the same way as an iron or wood. Let’s look at two other options. In Option A, this represents a non-offset center-shafted putter like a Titleist Bullseye. Measuring length is not referenced by the heel, rather the shaft axis so the 48” rule is placed alongside of the putter’s shaft at the point it intersects the ground up to the edge of the grip cap.
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
How to measure the length of a golf club?
Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
How to tell if a golf club is a standard length?
Determine if the club conforms to length standards. If the scale reads 0.0 or less, the length is less than 48.0 inches (122 cm) and conforms to the club length standard. If the scale reads greater than 0.0, the length is greater than 48.0 inches (122 cm) and it does not conform to the club length standard. Such a club could not be used in a professional golf game.
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
How long should a golf club be?
If you plan to play in a professional golf game, you’ll need to ensure your clubs conform to the club length standard of 48.0 inches (122 cm) or less. Measuring golf clubs might seem like a complicated task, but it’s actually pretty simple. You can measure the clubs yourself with a tape measure, or use a golf club measurement apparatus to determine if the clubs conform to length standards.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
Where to measure golf shaft length?
I use a ruler along the bottom of the shaft, intersecting with the ground with the club in the playing position. Some people measure to the end of the grip cap, others to the end of the shaft (beginning of the grip cap). I use the shaft length without grip as this is the most consistent length since grip cap height varies from grip to grip some amount.
Where is the club length measured?
The club length is not measured to the middle of the face, it's measured along the shaft axis (or as close as you can come). The club sole should be square with the ground while measuring, but the imaginary point where the shaft would extend down to the ground is the start point.
What would happen if two clubs were measured for length?
If two clubs were measured for length, one measured from the playing position, and one measured the traditional way (i.e. like the picture above) then would the one measured from the playing position measure longer when it's measured the traditional way?
Where to go in golf position?
In playing position, Go from the heel of the club where it touches te ground to the end of the grip
Can you measure an iron with a grip?
Also, if measuring an iron with a grip, make sure it hasn't slipped up the shaft. This is why it is preferable to measure without grips on, and because of different cap thicknesses.
Can you use a USGA driver measuring jig to measure irons?
Yeah but I doubt anyone is using a USGA driver-meas uring jig to measure irons for their spec sheets.
What size ruler do you need for golf club reading?
For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.
What Is The Standard Length Of A Golf Club?
There is no standard length of a club in golf. So, club makers are free to make clubs that they feel are appropriate for a golfer.
What ruler do you use to read golf clubs?
For best readings use a golf club measuring ruler.
Why are golf clubs longer?
The reason behind the shifts in club length is the mindset of the golfers. Most golfers believe that longer shafts can provide more distance. So, manufacturers have taken the best opportunity out of this. They believe it helps them to sell more.
How many inches is a 5 wood club?
For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers. Most golfers believe that longer shafts can provide more distance. So, manufacturers have taken the best opportunity out of this. They believe it helps them to sell more.
How long is a golf club?
So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.
How to find a custom club fitter?
For finding custom club fitters, you can contact your club professionals who have ample experience in this matter.
Where to place measuring stick on golf club?
Place the measuring stick directly behind the golf club . The stick should make contact with the shaft of the club and be placed on the ground right at the heel of the golf club you are measuring. The numbers on the stick should be pointed toward you so you can easily obtain a reading.
Why measure golf clubs?
You may also need to measure the clubs to ensure that they are regulation length for an upcoming tournament or event. It is important to know the proper way to measure the entire length of a golf club.
How to hold a golf club steady?
The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground. Then, place your hand on the top of the club to hold it steady.
How to determine the correct size golf club for beginners?
The correct golf club size starts with the golfer’s height and wrist-to-floor measurement.
How to adjust golf clubs?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
What is custom fitting golf?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
Where should the ruler be when measuring golf driver shaft length?
Thirdly, you will place the straight edge ruler against the upright golf driver. The ruler should be vertical to the ground when you measure driver shaft length and the ruler should touch the top of the golf driver.
Why is it important to have the right length of golf shaft?
Having the right length for your golf shafts is so important because it helps with controlling the distance of golf shots. Additionally, a correctly fitting shaft length will help to develop consistency and confidence in your golf clubs.
How long is a golf club?
What Is The Length Of A Golf Club? For a driver the length can be up to 48 inches. However, the typical length would be around 45.5 inches. Other golf clubs in the bag are shorter than the driver and go down to around 35 inches for a lob wedge and 32 inches for a putter.
Why do you need to get fitted for golf clubs?
By having an accurate read of the length of the club you are able to hit shots more consistently which will help with better performance on the golf course. This is why getting fitted for golf clubs is a great choice if you are serious about improving your game.
Do taller golfers need longer clubs?
The longer your arms, the longer the clubs you will need – so a taller player will need proportionately longer clubs as well. For example if you are over 6 ft 2 there is a good chance that you would be better suited to using golf clubs for tall men oppose to using a standard golf set.
