4 Simple Steps To Measure Driver Shaft Length
- Purchase A 48″ Aluminium Straight Edge Ruler. The first step is to purchase a 48″ Aluminium Straight Edge Ruler. ...
- Place The Golf Club. The next step is to place the golf club. ...
- Place The Straight Edge Ruler. Thirdly, you will place the straight edge ruler against the upright golf driver. ...
- Read The Measurement At Bottom Of Grip. ...
Is 38" the standard 4-iron shaft length?
For example, standard length for a steel 2 iron is 39 inches; a 3 iron is 38.5 inches; a 4 iron is 38 inches and so on to the steel 9 iron with the standard length of 35.5 inches. The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches.
How to pick the right golf shaft?
Info - Choosing the Best Shaft for Your Game
- Choosing the Best Shaft for Your Game. ...
- Shaft Selection Primer 1.0: Single most important determining factor in shaft flex (indicator of overall strength of the player).
- Swing Tempo - Pace of the Swing. ...
- Release. ...
- Trajectory - Height of Ball Flight. ...
- Flight Direction Tendency. ...
- Distance Control. ...
- Price. ...
What is a standard driver shaft length?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
How to determine the right Golf Club length?
Methods to Determine Club Length
- Overall Height. The first step in figuring out your proper club length is to start with your overall height measurement.
- Wrist-to-Floor Measurement. ...
- In-Swing Considerations (Dynamic Fitting) The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still.
Where do you measure driver shaft length from?
Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.
How long should my driver shaft be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How do you measure iron shaft length?
So you have 1 to 9 irons, which means different shaft lengths....Iron Shaft Length.IRONSHAFT LENGTH for Men (steel/graphite)SHAFT LENGTH for Women (steel/graphite)5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches8-iron36.5/37 inches35.5/36 inches4 more rows
What is the standard length of a golf shaft?
around 45.5 inchesStandard retail length is around 45.5 inches, but with so many custom options available, it's very possible to get the shaft cut down before you walk out the door. Some manufacturers have even started adding special shaft lengths as retail offerings.
What length of shaft do I need?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How are shafts measured?
2:168:36Double E - How to Measure a Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have something you can push against the tape measure as you're pushing against the tape measureMoreYou have something you can push against the tape measure as you're pushing against the tape measure and getting the measurement on the other end of the shaft.
What is standard shaft length for irons?
With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle.
How do you measure yourself for golf clubs?
3:0615:40ARE MY CLUBS THE RIGHT LENGTH? FIND THE CORRECT GOLF ...YouTubeStart of suggested clipEnd of suggested clipStand in normal standing upright posture with your arms at your sides. And you're just going to takeMoreStand in normal standing upright posture with your arms at your sides. And you're just going to take a ruler just a standard yardstick. And you're going to measure.
Are all golf club shafts the same length?
They are just what it sounds like – each golf club is the same length! Meaning, if you have a 4 iron through pitching wedge, each club is the exact same shaft length (these are also commonly referred to as one-length irons as well.
How to measure golf shaft?
To properly measure a golf shaft, however, you will need to use a rigid measuring device, such as a 48-inch yard stick or a ruler taped to the end of a traditional 36-inch yard stick. Tape measures do not provide an accurate measurement.
How to measure a golf club with a yard stick?
Ensure the ruler is aligned to start at the 2- or 3-inch measurement with the end of the yard stick.
Do you need to know how long the shafts are on each club?
Before you attempt to install new golf shafts on your clubs, you will need to know how long the shafts are on each club. If you are paying a company or individual to install the new shafts, already having the measurements will help save time and get your clubs returned to you faster. To properly measure a golf shaft, however, ...
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
When you shorten your golf shaft, do you keep in mind the after effects?
When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why is my driver heavier than my wedge?
That’s because the head is a little heavier to account for the extra force it takes to send your ball as far as it goes. During your driver shot, you should send the ball farther than any other point in your round of golf.
Does golf club length matter?
Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
What is the most important factor in creating distance with the driver?
However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
