How to measure the length of your driver shaft:
- Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
- Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. ...
- Measure the distance from the edge of the grip cap to the heel.
What is the standard length of a golf driver?
· As you can tell from the above steps, measuring the length of a golf club and driver shaft is really simple. It involves placing the golf club on the ground and using your 48 inch ruler to accurately read how long the club or driver is.
What is the Standard Shaft length of a golf driver?
· Measuring your golf driver is an easy task once you have done it before. Watch this quick video and give it a try. www.bombtechgolf.com
What is the "ideal" driver shaft length according to height?
How to measure the length of your driver shaft: Keep the golf club in the playing position such that the center of the sole is in contact with the ground. Position a 48” golf club ruler behind …
What driver length should you play?
You can easily measure the driver length in golf with measuring tape. For this you can come down to the sole of the club or you can also stop yourself at the ferrule . To get it more …
How can I tell the length of my driver?
0:592:11How to measure a golf driver? - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have to make sure your meter stick or a tape measure whatever use is completely flush andMoreYou have to make sure your meter stick or a tape measure whatever use is completely flush and underneath. That's the key right here if you can see that on camera want to make sure.
How long should a driver be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
What is the standard length of a golf driver?
45 to 45.75 inchesAlmost all drivers being introduced by manufacturers now feature a shaft length of 45 to 45.75 inches. Though some manufacturers have introduced drivers with shaft lengths longer than 46 inches, few have been successful.
What is the standard length of a men's golf driver?
around 45 inchesStandard, off-the-rack drivers usually check in around 45 inches, while the USGA limits driver length to 48 inches for its competitions.
How do I know if my golf driver is too long?
How Do You Know If Your Golf Clubs Are Too Long? The most common way to tell if your clubs are too long is that your back will be too upright, the toe of your club will be off the ground at address, and you will often make contact towards the toe of the club.
Are shorter driver easier to hit?
The short answer is, yes, it is easier to hit with a shorter driver. As we talked about before, a shorter driver will decrease the width of the arc to your swing and increase your frequency of hitting the center of the clubface.
Will a shorter driver help my slice?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
Why do I hit my 3 wood farther than my driver?
Players who hit their 3- or 5-wood as far or longer than their driver are typically using too little loft with the driver for their clubhead speed. You know, it's a funny thing with the driver and its loft compared to the other clubs in the bag.
Are all golf drivers the same length?
Over the past two decades, the average driver length has increased in length from 43 inches – 43.5” to 45” inches for men's drivers. For women's' drivers, they are typically one inch shorter so around 44” inches. These are usually the specs you'll get if you purchase a driver off the rack without any customization.
What size driver should I get?
LENGTH. The driver is the longest club in your bag. Men's drivers tend to measure between 45 and 48 inches, while women's drivers are typically between 43 or 44 inches. The size used depends on how a golfer feels in terms of overall control.
What is Taylormade standard driver length?
45.75"Inverted Cone TechnologyCLUBLOFTLENGTHSIM Driver8°45.75"SIM Driver9°45.75"SIM Driver10.5°45.75"
Are shorter drivers better?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
What length is Rory McIlroy's driver?
"I went back to 44 1/2 [inches] earlier this year," Rory McIlroy said. "I don't think driver length is the right way to tackle what the governing bodies want to do. I mean, I would be in agreeance with Phil. A lot of amateurs just pick a driver off the rack and it's going to be 45 and a half inches.
Should I shorten my driver?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How do you find the height of a driver?
1:066:09HOW TO HIT HIGHER, LONGER DRIVES - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to take a second typically you're going to place that just less than a foot behind the golfMoreYou want to take a second typically you're going to place that just less than a foot behind the golf ball pop it right the way down into the ground so it's pretty. Low.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
How tall is a standard golf club?
Standard golf clubs are generally designed keeping in mind golfers of average build with a height between 5’8” inches and 5’9”.
What is the spin rate of a golf ball?
The spin rate is the speed at which a golf ball spins on an imaginary axis during the flight after its hit by a golf club. This is measured in terms of rotations per minute.
What is flex in golf?
The flex refers to how much your golf shaft is capable of bending when a force is applied to it during a swing. It plays a key role in determining the squaring of the clubface at impact. Without flex, there are high chances of not being able to render a solid and good contact consistently. This, in turn, affects the distance and direction of the shot.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
Is golf driver length tough?
Many people find measuring the length of their driver in golf to be tough, but the reality is that it's not tough. You might have the question in your mind of h
Is it tough to measure driver length in golf?
Many people find measuring the length of their driver in golf to be tough, but the reality is that it's not tough .
How to measure golf clubs?
This is how we measure our clubs at Hireko. A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club’s heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
What is the best way to measure club length?
Regardless of the method one uses, the key is consistency. This is why there are jigs or fixtures for measuring club length. A prime example would be a product that Hireko offers called the Dynacraft Bench Ruler Soleplate works in conjunction with a 48” aluminum ruler and can be laid flat on a table or workbench. There is a roll pin that the bottom of the club’s sole rests against. This is a rather inexpensive item that can speed up and accura
What is offset putter?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How to measure putter length?
For putters, length can be measured a number of ways because of the position of the hosel and/or golf shaft in relationship to the heel. As mentioned before, the length on heel-shafted putters can be measured the same way as an iron or wood. Let’s look at two other options. In Option A, this represents a non-offset center-shafted putter like a Titleist Bullseye. Measuring length is not referenced by the heel, rather the shaft axis so the 48” rule is placed alongside of the putter’s shaft at the point it intersects the ground up to the edge of the grip cap.
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long is a golf club shaft?
The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
What is variable shaft golf?
There are variable-sized shafts available to cater to the needs of a taller or a shorter golfer. In choosing the right golf club length, you should be aware and must use the right method of choosing the custom length clubs.
How to determine driver length?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves. If you have difficulty seeing where your ball makes contact on ...
How long is a golf driver?
In our experience over the last twenty years, we have seen off-the-shelf driver lengths go from 43 inches to 48 inches, the maximum allowable by the USGA, and back to somewhere around 45 inches. The holy grail for most golfers is increased distance off the tee. With the USGA governing the rebound effect off the face of the driver (CT), it seems logical that adding length to the driver creates a longer swing arc and therefore more club head speed. But, if you do not hit the sweet spot on the face of the driver, you will actually LOSE distance because the efficiency (smash factor) will drop and you will generate less ball speed. In fact, the winner of the 2018 Masters used a driver that is 44.5 inches long and the 2nd place finishers driver length was 44.5 inches as well. Check out our list of 2018 stock drivers at the end of this blog.
Why is it important to have a shorter driver?
For most golfers we fit, a shorter driver creates more consistent contact on the face and actually helps not only gain distance but accuracy and consistency. In our opinion, driving for show is fine if you can hit great shots out of the rough or from behind a tree. If your fairways hit are less than 50% and you have an OB or two off the tee during a round, it is time to get your driver fixed!
How much heavier is a golf driver shaft?
If you are playing a shorter driver, say 44 inches instead of the “standard” 45 inches, you should consider a slightly heavier shaft, say 10 grams heavier. This will help create a more balanced feel and gain back some of the swing weight lost when cutting down the length of the club.
Does adding length to a driver increase swing arc?
With the USGA governing the rebound effect off the face of the driver (CT), it seems logical that adding length to the driver creates a longer swing arc and therefore more club head speed. But, if you do not hit the sweet spot on the face of the driver, you will actually LOSE distance because the efficiency ...
Should you go shorter or longer in flex?
As you go shorter in length, you should consider a slightly softer flex. Also, if you go longer in length you should consider a slightly stiffer flex. Our BGF Fitting System and TrueFitClubs Fitting Wizard take this into account when making our initial recommendations.
Support TST Affiliates
Direct links for Mevo, Mevo+, and Pro Package. Save 10% on Mevo with coupon code "IACAS" as well.
Posts
Day 50: Putted today while on some conference calls. Trying to get my eyes a little more over the ball and the handle more upright at address.