How to measure the length of your driver shaft:
- Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
- Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. ...
- Measure the distance from the edge of the grip cap to the heel.
Full Answer
How to shorten the length of a golf club?
- Remove The Grip
- Remove The Grip Tape
- Measure Twice and Cut Once
- Make The Cut
- File Off Any Lose Edges On The Cut Line
- Place A New Grip On The Club
- Add Weights to balance any change in swing weight
- Go Try Out Your New Shorter Length Club
How do you shorten a golf club shaft?
To do that, the DIY golfer will have to:
- Remove the existing grip.
- With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
- Re-install a grip on the newly shortened shaft.
- And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
How to size golf clubs for better performance?
- Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
- Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
- Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
How to measure golf shaft?
To properly measure a golf shaft, however, you will need to use a rigid measuring device, such as a 48-inch yard stick or a ruler taped to the end of a traditional 36-inch yard stick. Tape measures do not provide an accurate measurement.
How to measure a golf club with a yard stick?
Ensure the ruler is aligned to start at the 2- or 3-inch measurement with the end of the yard stick.
Do you need to know how long the shafts are on each club?
Before you attempt to install new golf shafts on your clubs, you will need to know how long the shafts are on each club. If you are paying a company or individual to install the new shafts, already having the measurements will help save time and get your clubs returned to you faster. To properly measure a golf shaft, however, ...
What Is Shaft Length?
Shaft length is the shaft’s raw length, which is connected between the clubhead and the grip. It acts like a lever and allows a player to hit the golf ball over a great distance by using the body’s rotation.
Shaft Length in Irons
The optimal shaft length in Irons can be determined by a set of measurements like arm length, player’s height, and swing posture. A tall player would not benefit by using a golf club designed for a short golfer.
Shaft Length in Drivers
The shaft length in drivers helps you determine how fast you can swing the golf club, along with the angle of attack and the club’s path. The standard length for the drivers is 44.5 inches.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
Can you put a putter straight up?
Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.
Do you need to buy a new shaft for a golf club?
All good-quality golf clubs can be re-shafted. You do not need to buy an entire new club if you need a new shaft. This luxury saves on expense, especially when it is only one club that needs replacing.
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.