Golf-FAQ.com

how do you remove condensation from a bushnell golf gps device

by Patience Stanton Published 2 years ago Updated 1 year ago

How do I Reset my Bushnell Golf GPS device?

A: To reset a Bushnell Golf GPS Watch, press and hold all four corner buttons for approximately 7 seconds, or until the screen powers off. Release the buttons, and the watch will reboot. To reset a Bushnell Golf hand-held GPS device, such as the Phantom or Hybrid, press and hold the down button and then press the power button once.

How do I update a course on my Bushnell device?

You can now quickly and easily update an individual Course on your Bushnell Device – simply select ‘UPDATE GOLF OURSE’ (located at the top of the ‘MY DEVIE’ page), enter the name of the course in the Search Bar near the top and select the course from the dropdown list.

How do I update my Bushnell Phantom GPS device?

You must have your device connected to your phone via Bluetooth for the update to work. • The course will start to update and notify you when complete. Bushnell Golf guarantees the Phantom GPS to be free of defects in materials and workmanship for one year from the date of purchase.

Does cleaning the connections on my Bushnell GPS watch improve battery life?

If cleaning the connections does not improve your battery life, your device has may have reached the end of its useful life. Deep Clean Instructions: Bushnell GPS watches feature a unique charging/data connection on the back side of the unit, facing the wrist when worn.

How do you get moisture out of a Bushnell rangefinder?

Bullfrog said: Put it in a bowl with some rice and cover with a lid. After a few hours the rice will draw the moisture out.

Are Bushnell rangefinders water resistant?

There's PinSeeker with JOLT Technology to eliminate any doubt that you have locked onto the flag. All of it is wrapped in fully-waterproof metal housing to give the golfer the ultimate golf laser rangefinder.

Why is my Bushnell rangefinder blurry?

If the reticle appears fuzzy, or requires a little time to come into sharp focus, further adjustment is needed. Turn the eyepiece clockwise another full turn and repeat STEP 8. 8. Keep doing this until the reticle is sharp the instant you put your eye to the scope.

Why is my Bushnell not working?

A: Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover).

Is Bushnell Tour V4 Waterproof?

Is The Bushnell Tour V4 Waterproof? The Tour V4 is water resistant.

Is the Bushnell Tour V5 shift waterproof?

It's waterproof, has 7x magnification, and the most advanced slope calculations of any rangefinder out there.

How do I update my Bushnell?

You can now quickly and easily update an individual Course on your Bushnell Device – simply select 'UPDATE GOLF COURSE' (located at the top of the 'MY DEVICE' page), enter the name of the course in the Search Bar near the top and select the course from the dropdown list.

How do you calibrate a rangefinder?

Without poking yourself in the eye with a screwdriver (maybe this would be best done on a tripod), set the lens focus to infinity, go outside and look at something far away through the viewfinder, and turn that little screw until the rangefinder patch aligns horizontally.

Where do I send my Bushnell scope for repair?

Bushnell Outdoor Products, ATTN: Lab Repair, 9200 Cody, Overland Park, KS, 66214.

How long do Bushnell batteries last for?

It is recommended to replace your Bushnell battery every 12 months.

How do I fix my Bushnell Tour v4?

If you find your Bushnell tour v4 rangefinder not working, try the following:Check if LCD is illuminated.Check if the POWER/FIRE button is depressed.Check for any obstructions to the objective lenses (lenses closest to the target)Check if the unit is held steady while the POWER/FIRE button is being depressed.

How do I change the battery in my Bushnell rangefinder?

0:041:02Bushnell Pro XE Golf Rangefinder - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd turn it counterclockwise. Okay pull that out. And take the battery out it uses a cr2 battery andMoreAnd turn it counterclockwise. Okay pull that out. And take the battery out it uses a cr2 battery and it's easy to replace. So pop in your new battery screw it clockwise.

FAQS

The issue with the Phantom locking up or not showing as charging is sometimes minor and can be corrected easily. If you are using a computer USB connection to charge your Phantom, we recommend using a plug-in adapter (like a phone charger) to get a faster and better quality charge.

WARRANTY

Bushnell Golf guarantees the Phantom GPS to be free of defects in materials and workmanship for one year from the date of purchase. This warranty does not cover consumer-caused damages such as misuse, abuse or repairs attempted by someone other than our authorized technicians.

Contact Us

Live chat - Got a quick product troubleshooting question? Let us point you in the right direction. Chat Offline

HELP WITH GPS DEVICES

Need help with your GPS? We've include some of the the most common questions below for quick reference, but click 'Find your GPS device' below for in-depth guides and manuals specific to your model.

HELP WITH LASER RANGEFINDERS

Have a laser rangefinder question? We've include some of the the most common rangefinder questions we get asked below for quick reference, but click 'Find your laser rangefinder' below for in-depth guides and manuals specific to your model.

HELP WITH OTHER TOPICS

Have a question about a recent BushnellGolf.com.au order or non-product specific question?

CONTACT US

Phone - Can’t find the answer to your question in our support section? Best for hard to describe troubleshooting or urgent matters like cancelling an order.

How long is the Bushnell Ion2 warranty?

Your Bushnell® iON2 is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Is Bushnell Outdoor Products responsible for damage?

By using this product, you agree that Bushnell Outdoor Products will not be held legally responsible for any injury or damage to you or any person or property caused by the user’s improper operation and/or poor judgment while using this product.

glanville63

Last week I was out playing golf in a buggy and all of a sudden the heavens opened. My Bushnell Tour v3 was on the shelf inside the cart and I didn't dream that it wouldn't be able to handle a little rain on it, so I didn't rush to cover it. The rain didn't stop so we packed in after an hour's delay.

MDGolfHacker

Take the battery out, put it back in the rice and heat (outside sun if possible) and rice inside the battery compartment if it's sealed and let it sit there for another few dats. My guess is there's still moisture inside. If the battery is still powering the electronics while there's still moisture, then it's going to short out.

glanville63

Thanks but it's been in the drum of rice for many days now so I guess it's past the simple fix.

MDGolfHacker

Thanks but it's been in the drum of rice for many days now so I guess it's past the simple fix.

Kenny B

Welcome from the U.S. Pacific Northwest! Glad you joined us and sorry to hear about your Bushnell. I love mine.

Guest Water fix to a Bushnell

March 2020 - Just fixed my Bushnell Tour V4 Rangefinder that stopped working after bag and cart went into a creek. You could see all the water droplets when looking through the viewfinder. So, I put it in a bowl of rice and placed it in front of my fireplace for couple days when using said fireplace. Now works great!

paperclip

Location Wishing he was somewhere hitting and chasing a little white ball.........

How to remove a button from a circuit board?

To remove them, you must use a high precision tweezer. They look like a small press button that is connected to the circuit board. After removing all the buttons, place them in a separate place. If possible, label the location of where you placed your button.

What screw to use to remove a rangefinder?

The screws hold together your rangefinder device. Depending on the model you have, you should have a Philips screwdriver or a Flathead screwdriver to remove the screws. You don’t need a big size screwdriver because the rangefinder is only a small device.

Range reading display gives broken or incomplete readout. second and third digit's are missing or incomplete

I fixed my dim LCD inside the rangefinder (Bushnell Tour v3 Jolt), by opening it up and reconnecting all the ribbon cables. Previously, the display numbers were dim, and I often could not read the last digit. To fix, you need to pull away the rubber grip around the device.

Bottom half of the numbers are not showing on the

LCD is faulty. Nothing you can do. That model has a 2yr warranty. Send it in to Bushnell.

Looking for information about the Bushnell Trail Camera 119932C

113 mentions of 'video'. Open manual, press CTRL+F and type 'video', press Enter.

INSTRUCTION MANUAL - Bushnell

https://www.bushnell.com > Trail-Cameras > PDF PDF The Bushnell Trophy Cam HD is a digital scouting camera.

Bushnell Prime Trail 119932C Manual ' Manualzz

https://manualzz.com > ... > Action sports cameras View online or download PDF (2 MB) Bushnell Prime Trail 119932C Manual • Prime Trail 119932C action sports cameras PDF manual download and more Bushnell ... ..

Battery cap replacement. For Bushnell Scout 1000 range finder

Question edited for clarity In the link, and for sale on eBay. https://www.google.com/search?q=bushnell+scout+1000+rangefinder+battery+cap ..

Hi , I have a Bushnell 570 x 60 Rotary Compact

No it's not --- junk it and buy another telescope. This time avoid Bushnell- Tasco, and Edu Science scopes.

Feedback

Is there any way to fix a rangefinder that has been dropped in water? I accidentally did it to mine last friday and now it is not working. Is there anybody else out there that has done this and fixed the problem? Would love to know before I go buy a new one. Thanks, Jay

Feedback

Don't laugh but you might trying putting it in a container filled with rice. If the device is still wet the rice will help speed up the drying process. I did the same to my iPhone a few weeks ago when I learned the difference between water resistant and water proof. My jacket was resistant and my phone was soaked but working like a champ now.

Feedback

I would caution the use of rice since it can flake and little bits of rice can work their way into cracks, crevices and buttons.

Feedback

Don't laugh but you might trying putting it in a container filled with rice. If the device is still wet the rice will help speed up the drying process. I did the same to my iPhone a few weeks ago when I learned the difference between water resistant and water proof. My jacket was resistant and my phone was soaked but working like a champ now.

Feedback

as has been said, silica gel dessicant (those little packets that you get with electronics that say "DO NOT EAT").

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9