Usually, the glue will soften enough to be able to wash off with soap and water, but rubbing alcohol may be needed. Heat gun – A heat gun will heat up more than a hairdryer will, so it will require less heating time to remove the sticker. They are also fairly inexpensive.
Full Answer
How do I repair my Ping golf clubs?
Write the provided PING repair order number (RCC Number) on the outside of the box. Ship the clubs to the PING Repair Department at the address listed above. Complete the sections as completely as possible, making sure to include the serial number for every club. Some clubs within the same set may have different serial numbers.
How do you remove glue from the shaft of a pen?
I spread the peanut butter on with my finger and rubbed it in for a second. Then I let it sit for about 2 minutes. I then rubbed it off with a paper towel and the glue was completely gone. I then took a lightly moist cloth and wiped the shaft.
How do I replace the grip on my tapered golf clubs?
Use a utility knife to make a clean cut lengthwise all the way through the grip, just touching the tape underneath.Be careful not to cut deep into the actual shaft. 2 Pry open the grip where you made the cut and peel back the old grip using a screwdriver or your fingers. It should just peel back easily.
How do you remove a broken shaft from a golf club?
Establish a firm hold on the clubhead with your gloved hand and twist it. If the head does not get detached, repeat the last two steps with 15 seconds of heat application until the head comes off. Keep the shaft in a graphite shaft extractor following the instructions given for the extractor.
How do you remove grip glue from a golf shaft?
How to Remove Tape From Graphite ShaftsHeat the golf club you plan to remove the tape from with a heat gun. ... Rub down the tape with mineral spirits. ... Wipe the shaft with acetone after you have removed the tape. ... Repeat the process for each graphite golf shaft requiring tape removal.More items...
What kind of glue is used on golf club heads?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
What is in golf grip solvent?
Water and Soap The cheapest and most convenient homemade solvent is water. Water-based grip tape has a glue-like substance that is activated by water. Before you spray the tape, add a small amount of detergent, which provides lubrication. Water offers many advantages -- nonflammable, odorless and safe for your skin.
What kind of epoxy do you use on golf clubs?
Best 4 Epoxy Adhesives for Golf ClubsJ-B Weld 8281 Professional-Size Steel Reinforced Epoxy Twin Pack – 10 oz. View on Amazon. ... Brampton Epoxy Pro-Fix 20/20 Long Cure Golf Club Repair. View on Amazon. ... GolfWorks High Strength Epoxy Golf Club Head Shaft Adhesive 50 ml. View on Amazon. ... Permabond Epoxy For Golf Clubs.
How do you remove epoxy from golf shafts?
Apply heat evenly to the hosel for about a minute, using a heat gun or heat torch. This will break down the epoxy that bonds the shaft to the hosel and make removal easier. If you are working with graphite shafts, use a heat gun, not a torch. Wear goggles and protective gloves.
Do you need special epoxy for golf clubs?
Unless you have to, do not use non-golf specific epoxies. Use epoxy designed for golf as they usually have higher peel sheer strengths and elastic properties that hold well during impacts specific to a golf club hitting a golf ball.
What can I use instead of grip solvent?
Paint Thinner / Mineral Spirits Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. Like grip solvent, the mineral spirits will lubricate double-sided tape allowing you to work the grip over the shaft so that it adheres.
Can you reuse golf grip solvent?
Can be reused over and over again. Quick dry times – grips can be used in less than an hour. Pleasant citrus smell ideal for household use. Available in 8oz., quart and gallon bottles.
Can you use acetone for golf grips?
When replacing golf grips with traditional grip tape that deactivates with the application of golf solvent, many other volatile liquids will work as well. Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips.
Can you use JB Weld epoxy for golf clubs?
JB Kwik Weld has a 2451 psi which is just about perfect strength for a golf epoxy and heat tolerance of 230 degrees. The best part is it has a 6 minute working time, 1 hour harden time, and 6 hour cure time.
What is the best glue to use on golf clubs?
Permabond offers a range of toughened epoxy adhesives which are suitable for bonding golf clubs. They offer excellent adhesion to carbon, graphite, composite, titanium, steel, wood and many other materials.
How long does it take for epoxy to dry on a golf club?
On average, the curing of golf epoxy may take about 12 to 18 hours to get dry on a warm day.
How to fix a broken golf club?
First remove the old epoxy from the hosel of the broken club. Use sandpaper and abrade the shaft tip that has to go into the club. Clean both the sealing surfaces using a solvent to remove any debris that may cause interference with the epoxy bond. Mix the epoxy components in a disposable container.
What type of epoxy is used for golf clubs?
You can use two types of two-component epoxies for bonding golf clubs. They are quick cure-epoxy and long-cure epoxy. The time taken for curing depends on the kind of epoxy used and the temperature in which it is used.
How to apply epoxy to a graphite shaft?
The steps to apply epoxy are the same irrespective of whether you’re going to fix a steel shaft or a graphite shaft. Measure the tip of your old shaft. Trim the tip end of the new shaft following the trimming instructions so that it is the exact size of the old shaft. Roughen or abrade the shaft tip.
How much epoxy do you need for a golf club?
This will usually be less than 0.5g. A drop is more than enough for the shaft tip.
How much PSI should I use for golf shafting?
Ideally, your golf epoxy should have a PSI number of over 2500 PSI. The GolfWorks shafting epoxy is a great option because of its high torque resistance and shear strength. The epoxy renders 90% curing to 2765 PSI in a day and 100% curing to 3280 PSI in a week.
What is golf epoxy?
What is a Golf Club Epoxy? Golf epoxy is an organic compound that is used to repair and glue together broken parts of golf clubs. Epoxy is formed by a covalent bond between carbon and other elements like nitrogen, oxygen, or hydrogen. This is subject to curing in the presence of a catalyst to form an epoxy resin.
How to keep a shaft from getting burnt?
Keep the shaft in a super lock tight shaft holder and tighten it in a vise. If your shaft has a plastic ferrule, cover the ferrule with a wet paper towel so that it does not get burnt.
How to remove tape from graphite shaft?
When removing tape from graphite shafts, I pull off what is there, a little heat if it is stubborn, and some goo gone to remove the sticky residue. Basically the same as for steel shafts.
Does GolfWorks sell epoxy cleaner?
GolfWorks sells an epoxy cleaner in liquid and wipes, it works well. I keep it around for this type of application.
Does TM use double sided tape?
I have seen where TM uses a very thin double sided tape. It may look like glue since its a bit opaque. But heat to remove and wipe down with mineral spirits to get the residue off.
Do you need to include serial number on golf clubs?
Complete the sections as completely as possible, making sure to include the serial number for every club. Some clubs within the same set may have different serial numbers. Please ensure that all the clubs in the box are listed on this form. Please note that ALL COMPONENTS AND PARTS are required for no-charge consideration. If you need DIFFERENT repairs done to each club within a section, please describe this to us in detail in the Additional Instructions area. For example, please note which irons need reshafting vs. regripping.
Does ping repair require a credit card?
PING accepts Visa, MasterCard, American Express and personal Checks, which require approval before repairs can be performed.
Can ping be repaired?
The Releaser understands that PING may be unable to repair or adjust PING product that has been previously repaired by a third party other than PING. In such cases, Releaser's property will be returned at Releaser's expense. Releaser also understands and acknowledges that if any merchandise is determined by PING to be counterfeit, PING is authorized to retain such merchandise for destruction without compensation to Releaser.
Can you unsubscribe from ping?
PING may use the information you provide , including sending you promotional and marketing materials regarding PING products and services, per the terms of our Privacy Policy. You can click the unsubscribe button in these communications to no longer receive them
Does Ping release its employees?
By signing below, Releaser forever releases and discharges PING and its employees and related entities from any and all manner of claims, demands, liabilities or obligations of any kind or nature resulting from, or claiming to result from, in whole or in part, the work done by PING on the golf club (s) provided to PING by Releaser. Releaser acknowledges that Releaser assumes all such liability and responsibility.
How to replace golf grips?
The process of replacing golf grips includes placing tape on the golf shaft, and then lubricating the tape with solvent in order to deactivate the tape's adhesive. The solvent mixes with the adhesive, creating a slippery surface that allows the grip to slide over the tape.
What solvent to use to install golf grips?
Mineral Spirits. You can also use mineral spirits, found in any hardware store, to install your golf grips. This solvent is inexpensive, but if you use it indoors, you should be sure you have proper ventilation.
What type of grip tape is used in golf?
Water. In an effort to be more environmentally friendly, the golf industry has developed water-based solutions, which require the use of water-activated grip tape. Plain water and water-soap mixtures also activate this type of grip tape.
How often should you change your grips?
Golf professionals recommend you change your grips every six months when you play golf regularly.
Can you use nail polish remover on golf grips?
Nail polish remover with acetone isn't the first thing you think of when installing golf grips, but it's ability to deactivate the adhesive on the tape makes it a good choice. While not quite as potent as commercial grip solution or even mineral spirits, nail polish remover has fewer fumes and doesn't require the same level of ventilation. It can be a more expensive option, but if you are replacing only one or two grips, this solvent will do the job.
How long does it take to remove adhesive from a golf club shaft?
If you try to use just soap and water to try to remove the adhesive, you could be in for an hour or more of just stroking your shaft, golf club shaft that is, just trying to remove the adhesive residue. For some people, this is just too time-consuming, so opt to leave the stickers on.
How long does it take to remove golf grip tape?
They are also fairly inexpensive. Usually, 5 minutes is sufficient for a heat gun to heat the glue enough to release it. This also works great when removing golf grip tape!
How to get sticker off of a house?
The basics are that the heat from either a heat gun or a hairdryer will cause the glue to soften and let go of the sticker allowing you to peel it off. Usually, the glue will soften enough to be able to wash off with soap and water, but rubbing alcohol may be needed.
Why won't someone remove stickers from their clubs?
Don’t Know How to Remove it. This can be one of the biggest reasons that someone won’t remove stickers off of their clubs is simply the lack of knowledge. If you have ever dealt with the sticker residue, then you know how annoying it can be in the long run.
How long does it take to remove sticker after purchase?
Many places have everything needed to remove the stickers after purchase and it takes just a few minutes extra after purchase to save yourself a huge headache in the long run. While not all stores will offer this service, many of your specialty shops are more likely to offer this to their customers.
Why do clubs leave stickers on their clubs?
Almost like a status symbol, they will leave the stickers and associated logos on their clubs to be able to show others what type of clubs they are using. This may be partially due to not wanting to answer questions about the clubs, but for some, it may be about bragging rights.
Does adhesive stick to shaft?
The adhesive can leave a residue on both the shaft and your hands every time they touch that area, and while the adhesive will seem to stick and leave a residue on everything that touches it, it does not seem to want to come off entirely very easily.
How to clean a golf club with a light compound?
Always choose the light version, as heavier compounds can damage your clubs coat. Clean your club with a damp microfiber cloth. Then allow club to air dry. Pour a small amount of rubbing compound on to a clean cloth. Start rubbing the cloth on to the sky mark. Use a circular motion when cleaning your club head.
How to get rid of scuff marks on golf clubs?
All you need to do is buy a white magic eraser and rub it against your club. I’ve tried this myself and the scuff marks quickly disappear.
How to fix scratches on stainless steel golf clubs?
This is how you fix light scratches on stainless steel golf clubs. Wash the club head with warm soapy water and then dry the club with a towel. Rub fine grade 1,500 grit sandpaper over the scratches in a back and forth motion. This will polish your club head surface, and restore it to its original condition.
What causes scratches on golf balls?
After all, you’re smacking a metal stick against a solid golf ball. Light marks is the most common type of damage you’ll come across, and the easiest to remove. The small and often fine scratches are caused by everyday play. Chipping and fairway shots are the most often culprits.
What does it feel like to have a new golf club unwrapped?
The feeling of a new unwrapped golf club is intoxicating. It’s nice seeing the irons surface and sun combine into one shimmering beauty. However it doesn’t take long for the shine to wear off. The truth is scratches, sky marks and scuff marks on golf clubs are a reality for all golfers. While some golfers wear these marks as badge of honor, ...
Why won't golfers remove scratches?
Deeper scratches are difficult to fix, and this is why most golfers won’t bother removing them.
Why are there sky marks on my golf clubs?
Aside from the embarrassment, sky marks are quite ugly to look at many players tend to clean them. To avoid causing sky marks on your clubs , don’t tee off too high.