To remove the spindles from your EZGO RXV golf cart, follow the instructions below. Get ready to remove the wheel by loosening up the front wheel of your EZGO RXV golf cart. Lift up and support the front end of your golf cart. Remove the front wheel of your golf cart. You should see a cotter pin which you need to remove.
Full Answer
How do you remove the motor from an EZGO cart?
You can use a hammer mildly to slowly tap and pull it off the hold and pull it up. The other issue you may face with the older models of EZGO carts is where the motor could be welded to the body.
How do you adjust the steering wheel on an EZGO?
EZGO steering adjustment: Start with the steering wheel by loosening the central shat nut attached to it. Use an adjustable wrench as the size of the nut may vary between 15″ to 16″. Don’t remove the nut entirely as the steering wheel may pop out, which could surprise you.
What kind of steering does an electric EZGO golf cart have?
1998 Electric EZGO Golf Carts usually have a front-mounted steering wheel. If your electric TXT model is having a lot of play with the steering wheel, you need to start inspecting the bushings. The steering box in old style EZGO steering systems are prone to wearing out.
How do you remove the ground strap from a golf cart?
Next, use the 10mm socket to remove the ground strap from the starter/generator and remove the part from the cart. Now, there are two bolts between the muffler and the starter that should be removed and the ground strap should also be dispensed with.
How do I change the shocks on my golf cart?
0:091:20How to Install E-Z-GO Rear Shock Absorbers - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the top nut with a wrench inside of the frame. While twisting the bottom of the strut. And theMorePull the top nut with a wrench inside of the frame. While twisting the bottom of the strut. And the counterclockwise mission to install new bushings and washers to the strut. And reinstall.
How do you remove an axle shaft on a EZ Go golf cart?
1:592:59How to Remove an E-Z-GO TXT Front and Rear Axle - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step is to remove the rear pin from the brake cable once this is done remove the c-clipMoreThe first step is to remove the rear pin from the brake cable once this is done remove the c-clip and slide the brake cable from the assembly.
Do ezgo golf carts have shocks?
Your E-Z-GO golf cart's suspension works hard, and regular maintenance is essential. Squeaking, stiffness, and poor handling can all be indicators that your vehicle's suspension needs attention. Get the smooth ride and consistent handling you want with our top-quality replacement shocks and hardware.
How do I change the front leaf spring on my EZ GO TXT?
0:103:58EZ-GO® TXT Golf Cart Heavy Duty Leaf Springs - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing you want to do in installation is turn the key to the all position then engage theMoreThe first thing you want to do in installation is turn the key to the all position then engage the parking brake. And then switch the run toad switch to the off. Position.
Why do golf carts wobble?
Check whether the tire is properly seated and also check for proper wheel alignment. Sometimes if the wheel alignment is not proper, it could make the cart wobble. The lug nuts and hubs in the wheel could also cause this problem. If one of the hubs is missing or bent at an odd angle, the cart could wobble.
How do you change the rear wheel bearing on a club cart golf cart?
5:0511:47How to replace a golf cart wheel axle bearing. Yamaha G29 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then your bearing will press off this way and then you press on the new one that way and this isMoreAnd then your bearing will press off this way and then you press on the new one that way and this is what it looks like. And that's it that's with the new bearing.
How can I make my golf cart suspension better?
How To Make A Golf Cart Ride Smoother (10 Ways)Correct Tire Pressure. ... Replace Worn Out Shocks and Struts. ... Check the Fluid and Filter. ... Replace the Clutch. ... Flat Spot in Tire. ... Tire Damaged or Out of Line. ... Worn Out Suspension Bushings. ... Check Your Lift/Tire Combo.More items...
How often should you replace golf cart shocks?
Some shock absorber manufacturers say you should replace them at 50,000 miles, but that's more for their benefit than yours. Having the shocks and suspension parts inspected at 40,000 or 50,000 miles, then annually after that, is a better idea.
Do golf carts have shock absorbers?
Golf Carts utilize shock absorbers and/or leaf springs to soften ride quality over the bumps of rough terrain. Heavy duty golf cart shocks (or leaf springs) are recommended if you experience suspension sagging that is causing your wheels and tires to rub in your wheel wells.
How do I change the front shocks on my EZ GO TXT?
0:021:37How to Install E-Z-GO Front Shock Absorbers - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step is to use a 9/16 wrench and remove the lower nut on the bottom of the shop. With theMoreThe first step is to use a 9/16 wrench and remove the lower nut on the bottom of the shop. With the lower portion of the chakra moved use the same socket to remove the top nut.
What do leaf springs do on a golf cart?
Just as in other vehicles, leaf springs are used for the suspension of your golf cart and are important for the structure of your cart, as well as keeping your ride smooth and comfortable. If you have a lifted, off-roading, towing, or hunting cart, it's even more crucial that you routinely replace your leaf springs.
What is a ezgo TXT golf cart?
The EZGO TXT Valor is the latest golf cart from Textron belonging to its 2020 edition. It is a gas-powered vehicle. It features a continuously variable transmission (CVT), and a rear axle ratio of 11.47:1. It has one 12V battery. The Valor's engine generates 13.5 horsepower.
How to change motor on Ezgo cart?
How to change the motor on a Electric EZGO: The first step is to remove the wires connecting the battery pack to ensure that the cart has no power. It is advisable to use protective gloves. Do not use wristwatch, rings or jewelry.
How to remove the engine on a 2001 Ezgo?
Here’s how you do it: You have to remove the 8 bolts holding the engine in place. You should remove all attachments such as cables, filters and ignition wires. The engine can then be pulled up. Mind the weight of the engine; it’s around 80 pounds.
How to yank a cart motor out?
Another simpler way to yank the motor out would be to remove the left side rear wheel of the cart out. You can then place the jack (if it is a hydraulic one) beneath the motor. This way, once you have removed all the cables connected to the motor and the bolts, it becomes very easy to remove the motor.
How to remove PDS motor?
Here are the steps to remove a PDS motor: You must first put the Run-Tow/Maintenance switch to Tow/Maintenance. Disconnect the wires connecting the battery. Disconnect and remove all the wires and cables connected to the motor. You should then remove the snap ring and the speed sensor from the motor end cover.
Why is it so hard to remove a golf cart motor?
On most occasions, the difficulty in removing the motor from its place in a golf cart is due to the rust that would have developed all around. It won’t come off so easily and you can’t use too much force as it may damage some of the other parts.
Can you pull an EZGO cart up?
For starters, the input shaft could be jammed or broken, making it difficult for you to pull the motor up. You can use a hammer mildly to slowly tap and pull it off the hold and pull it up. The other issue you may face with the older models of EZGO carts is where the motor could be welded to the body.
Why does my EZGO golf cart have a loose steering wheel?
EZGO golf carts can experience loose steering because of loose tie rods or worn out steering wheel brushes and spindles. EZGO Golf Carts negotiate with uneven terrain, and loosening of the steering wheel is natural over time. Most cases arise when the cart is faced with a hard surface. The bearing slops and tie rods may have gotten loose.
Why is my 1996 EZGO TXT steering loose?
With your 1996 EZGO TXT model, a loose steering problem can arise from tie rods and worn out or free steering linkages. It may not be significant at lower speeds, but definitely unsafe at a higher pace. Either way, here are the main points you should focus on maintenance –
How to fix a steering wheel that is loose?
Start with the steering box and the tie rod. If the problem is with the tie rods, then loosen them and turn the steering wheel to either side by an equal degree and recenter it. Reattach the tie rod after turning the wheel to each side equally. If the steering is still loose, move on to the steering box.
Why does my golf cart turn left and right?
This happens when the wheel turns the cart excessively to either left or right with the steering. Golf courses are uneven or hard terrain, and the steering wheel can get off-centered or loose when dealing with it. Inspect the steering wheel periodically and adjust whenever necessary, using the right tools.
What is a ball socket on a steering wheel?
Ask someone to move the steering wheel in any direction while you inspect the joints, called ball sockets, which have a bolt attached to the spindle while turning the wheel. Finally, if the problem persists, you might have a worn out or loose kingpin that needs tightening or replacement.
Does a 1998 Ezgo have a steering wheel?
1998 Electric EZGO Golf Carts usually have a front-mounted steering wheel. If your electric TXT model is having a lot of play with the steering wheel, you need to start inspecting the bushings.