How to Shorten/Cut Driver Shaft Length
- Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft.
- Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker.
- Fix the golf club in position in a vise.
- Position the tube cutter or the saw blade on the position that is marked. ...
- Turn the cutting equipment on and cut the shaft through smoothly and slowly.
- Turn off the cutting equipment and remove the club.
- Smooth out the rough edges on the butt end of the golf club with sandpaper.
- Fix a new grip on the shaft end.
- Add weights to the clubhead to restore the original swing weight feel.
How to shorten a golf club?
How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ... 3 Wrap masking tape around the area of the shaft that will be cut. ... More items...
How do you fix a bent shaft on a golf club?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How do you fix a loose grip on a golf club?
To do that, the DIY golfer will have to: Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How to cut a golf shaft?
Use a tube cutter for a steel shaft and a saw blade in case of a graphite shaft. Turn the cutting equipment on and cut the shaft through smoothly and slowly. Turn off the cutting equipment and remove the club. Smooth out the rough edges on the butt end of the golf club with sandpaper. Fix a new grip on the shaft end.
How can I shorten my golf clubs at home?
0:425:56How to CUT DOWN (shorten) your own golf clubs AT HOME - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a hook blade type of knife will work a lot better you can get one of like two pound off of ebayMoreSo a hook blade type of knife will work a lot better you can get one of like two pound off of ebay or amazon or something i'll link everything you use in the description.
How can I make my driver shaft shorter?
How to Shorten Golf Club ShaftsRemove the grip using a utility knife with a hook blade. ... Measure the amount of shaft you want to remove (add an additional 1/8 inch to make up for the end of the grip), and mark the spot with permanent marker. ... Align your cut mark with the blade of the saw and secure the club in the vise.More items...
Can you shorten an iron shaft?
Instead of stocking individual shafts for every club, the same shaft can be tip trimmed to fit any iron club. In additional to trimming the tip, you'll then need to trim the butt end, to achieve the final desired club length.
How much does it cost to shorten a driver shaft?
Generally, this fee will be about $15 to $35 depending on where and when you get the work done. Replacing a shaft on a driver is a bit more work than regripping a club. Try to have it done by a reputable person who understands club fitting.
What happens if driver shaft is too long?
“If a driver shaft is too long for the player, they can struggle to find the middle consistently. Off-centre hits not only drastically reduce ball speed and distance, but have a big impact on accuracy.”
How long should a golf driver be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Do pro golfers use shorter clubs?
Tour players, who play golf courses that are hundreds of yards longer than the courses we play, and play for millions of dollars, have drivers that average about 44 inches in length.
Can I cut my irons to one length?
Every ONE Length iron has been re-engineered to match 7-iron head weight, therefore, any custom shaft (cut to 7-iron length) can work with any of the ONE Length heads.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
Can I cut an inch off my driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How tall should your driver be?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.
How long should my golf shaft be?
Have a friend or the salesman measure the distance from your wrists to the floor. This is the length of the golf shaft you will need. The average male has a measurement of 43 inches. Depending on your arm length and height, this may vary but it should be around that number.
Can you make a driver shorter?
By reducing the length of your golf driver you will make the swing weight lower which will make your golf driver "feel" lighter. In doing so, your shorter golf driver will also feel stiffer because the shaft length is now shorter.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
Does shortening a shaft increase swing weight?
For every half inch of length added, the swingweight increases by three swingweight points. For every half inch of length removed, the swingweight decreases by three swingweight points.
How long should my driver shaft be?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Why add weight to a clubhead?
And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
Do all golf shafts have to be cut down?
Did you know that almost all golf shafts are cut down to size before being installed in golf clubs? It's part of the manufacturing and club-building process for new clubs.
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to cut graphite shafts?
Once you have marked the spot where you want to cut the shaft, reposition the shaft in the vice so that you can cut it comfortably and safely. Be sure to set the club in the vice in a way that will protect it from getting bent under the pressure you apply during cutting if you are using a hack saw. For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to measure for a new grip on a golf club?
That will tell you how much tape you need to apply to the shaft in order to get maximum adhesion without having any extra sticking out of the bottom of the grip. Once you know how much tape you’ll need on the shaft, measure the shaft, and make a mark a little short of the full length of the grip.
What tape do you use to secure a golf grip?
Adhesive Tape (for securing the new grip – purchase from a pro shop) (the amount you’ll need depends on how many clubs you’re planning on cutting down)
What happens if you cut too much off a golf club?
If you cut too much off of a club, you’ll be making the shaft a lot more rigid. You’ll also be getting into a skinnier section of the shaft, and that might affect the possibility of finding a grip that will fit appropriately. You don’t want to find out that you took too much by watching your club fly out of the grip on the follow-through of the first shot that you hit with it.
How long does it take for a golf club to cure?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure. It’s probably best to let the club dry overnight before you take it out for practice swings.
Series Navigation
I know this might seem obvious, but be sure to measure and mark off the point at which you are cutting. Especially while tipping a shaft (you can’t undo this), it is important to have precise measurements. Use a sharpie to make your marks on the shaft. Here is a tutorial on how to measure golf clubs.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to keep golf club from moving?
Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
How to dry golf grips?
Place the grip over the end of the shaft and push it down before the solvent dries. Inspect the fit of the grip and press out any uneven spots with your fingers. Allow the grip to dry overnight before using the club.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
What is flex in golf?
The flex refers to how much your golf shaft is capable of bending when a force is applied to it during a swing. It plays a key role in determining the squaring of the clubface at impact. Without flex, there are high chances of not being able to render a solid and good contact consistently. This, in turn, affects the distance and direction of the shot.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
How tall is a standard golf club?
Standard golf clubs are generally designed keeping in mind golfers of average build with a height between 5’8” inches and 5’9”.
What is a Project X HZRDUS shaft?
What is the Project X HZRDUS Black Fairway Wood shaft? Project X HZRDUS Black Fairway Wood shaft is a low spin golf shaft design. It comes with enhanced firmness over the entire length of the shaft....
Why is the shaft shorter on a golf club?
Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it. You need to be sure this is what you want ...
Why is a shorter driver shaft better?
Pros: A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.
What does a longer shaft mean?
A longer shaft means a wider arc to your swing and that creates more speed. But hitting the center of the clubface is much more important. A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch.
What happens if you have a shorter driver?
As we talked about before, a shorter driver will decrease the width of the arc to your swing and increase your frequency of hitting the center of the clubface.
Does shortening your driver shaft help?
More practice equals more consistency. Yes, better equipment helps. And equipment that is attuned to your needs helps even more. Shortening your driver shaft could be beneficial for you and combining that with the want to improve is a step in the right direction.
Does shortening a driver shaft make your handicap fall?
Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them. This doesn’t mean that shorten ing your driver shaft will immediately make your handicap fall. The biggest factor is still your technique and how you play.
Is a shorter shaft better than a longer shaft?
Many professional golfers will agree that a shorter driver shaft is more beneficial, overall, than a longer driver shaft. Of course, every golfer is different, and every swing is unique. Adjusting your equipment isn’t a quick fix to solve any issues you have. The most important factor is how you play.
How to tell the length of a golf shaft?
The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
Where should the straight edge be placed on a golf club?
The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft.
How to measure golf clubs?
Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
What is the most important spec to pay attention to when you’re shopping for a new set of golf clubs?
According to the pros, the length of golf clubs is the most crucial spec to pay attention to when you’re shopping for a new set of clubs or an extra driver or hybrid.
What should be taken into account when buying a new golf club?
When you’re getting fit for a new set of clubs, launch angle, dispersion, spin rate, and ball speed should also be taken into account in order to ensure you purchase the correct length.
