ONE Length simplifies your game by eliminating variables like ball and foot position, and posture. Having all your irons the same length allows you to use one, repeatable setup and swing from your hybrids to your wedges. This results in increased confidence, and more consistency from every distance to the pin.
What are the different lengths of golf irons?
A standard set of golf irons has clubs of all different lengths. The shorter irons are the wedges, nine iron, and 8 iron. Then you have mid-length irons and then finally long irons like the five, four, and three iron. As you move up in the set, the irons get quite a bit longer.
Are all of the golf clubs the same length?
Brent Kelley is an award-winning sports journalist and golf expert with over 30 years in print and online journalism. The idea for a set of irons in which all the clubs, from the 3-iron to the wedges, are the same length, is not new.
Are single lengths making it harder to control your golf clubs?
Said Cleveland/Srixon’s Brian Schielke, senior product manager for golf clubs, “The single lengths we’ve found hit super high wedges and super low long irons, which makes both distance gapping and control difficult. “People struggle hitting their long irons too low as it is. This just accentuates that even more.”
What does the same shaft length for every iron mean?
The same shaft length for every iron in the set means the posture, the ball position and the swing itself are exactly the same for your 4-iron as they are for your wedge.
What is the advantage of same length golf clubs?
One-length irons allow you to stand to the ball in the same way regardless of the iron you're using, in theory helping with consistency of strike and club speed. Essentially you can swing the same way regardless of what club you have in your hand.
Should I make all my clubs the same length?
So what's the advantage of having each club the same length? For starters, in theory it makes it easier to set up consistently to the golf ball every single time. Since each club is one length, it should make setting up square to the ball easier.
Does one length clubs work?
Luckily swinging with a one-length iron set should not make you lose distance. You may see a few yards difference with your long irons, but your short irons will likely end up going a few yards further. Sometimes the longer length on the short irons gives them a bit more distance, but it won't be significant.
How do you play the same length irons?
1:2810:09I Played One-Length Irons For A Year... (AND I LOVED THEM!)YouTubeStart of suggested clipEnd of suggested clipAs well so the idea is you have the same ball position. And you put the same swing on it for everyMoreAs well so the idea is you have the same ball position. And you put the same swing on it for every iron in the bag.
Do any pros use one length irons?
DeChambeau is currently the only Tour player who uses single-length irons, but Norman said he thinks that could change in the future.
What golfers use same length clubs?
Bryson DeChambeauBryson DeChambeau does things a little differently on the golf course. One of the aspects that sets him apart on tour is the set of one-length irons in his golf bag. Pro Tips spoke with DeChambeau about his decision to use one-length irons.
Can I make all my irons the same length?
Normal incremental length sets of irons cannot duplicate that many different fitting elements. While it is possible to build incremental length sets of irons to all be matched to the same MOI, each club will be different in total weight, head weight, swingweight, balance point and swing feel.
Does Bryson DeChambeau use same length clubs?
That's right. DeChambeau plays all of his irons -- all of which have unique names -- with the same 37.5-inch shaft and has been doing it since 2011, when he made the switch -- from 3-iron to 60-degree wedge -- with coach Mike Schy.
Can I just cut my irons to one length?
1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.
Where do you place the ball for one length irons?
Single length irons and fairway woods are designed to be played using a center of stance ball position.
How do you get fitted for one length irons?
0:023:38F7 One Length Fitting Process - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply some face tape for three shots. And then what is that plotting on the face look like once you'MoreApply some face tape for three shots. And then what is that plotting on the face look like once you've completed that I like to go then to the 7-iron again and just hit three shots because.
Do pros shorten their irons?
Not really. Usually the clubs stop getting shorter above the 9-iron, meaning the various wedges are the same length as the 9-iron.
Should I add length to my irons?
Sometimes a golfer's height and arm length will negate each other and a standard length is the best option. As length is increased, so is the weight. Increasing the length also changes shaft flex. For every 1" added, the shaft becomes one flex softer; likewise, a shorter shaft plays stiffer.
How long should golf clubs be for 6 2?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
Does iron shaft length affect distance?
Our testing has shown conclusively that there is absolutely no measurable difference in distance due to the standard 1/2″ incremental shaft length increases between clubs. The only affect of the standard length increases between clubs is to make each successively longer club harder to hit.
Should I add an inch to my irons?
Adding length to a driver can boost clubhead speed and distance, but the extra length makes it harder to control the clubhead, and a center face hit has the most affect on distance. Clubfitters recommend players hit the longest driver that they can control.
WHAT MAKES ONE LENGTH WORK?
Each ONE Length iron and hybrid club head is re engineered to match 7-iron head weight to promote consistent distance gapping and feel through the set.
Why are variable length irons good?
Many golfers lack consistency and forgiveness with their variable length long irons. ONE Length, as seen in the GEARS test below, can help promote more control and more centered contact on the face, resulting in more consistent distance, launch and feel.
What shafts have flex profiles?
Graphite and steel shafts feature adjusted flex profiles to promote higher launch in the long irons and lower, more controlled trajectories in the short irons and wedges.
Is a 7 iron a repeatable set up?
Improvements in consistency are even noticed in the ONE Length 7-iron compared to the variable length 7-iron. This proves that having one repeatable set up and swing from your long irons to wedges, can translate into improved consistency with the clubs you already feel comfortable with.
Do short irons have a longer shaft?
Since the short irons (8i-PW) and wedges (GW-LW) have a longer shaft, we have to remove head weight to match 7-iron swing weight. This is accomplished by using a hollow cavity in the sole, shown in the wedge on the right, which helps raise the CG and reduce the inertia to promote lower launch and more controlled trajectories.
Why is the shaft longer than the shaft?
The longer the shaft, the faster the clubhead is traveling when it impacts the golf ball.
Why use single length irons?
The reason? Since all the clubs are the same length, golfers can use the exact same set-up and swing with every shot. But there are detractors, too, who believe that single-length irons make distance control and proper yardage-gapping more difficult and that amateurs don't have the swing skills necessary to make the best use of them.
What is the difference between lie angles and clubheads?
The clubheads are all identical weights; the lie angles are all identical and about 10-degrees more upright than typical . The point, DeChambeau says, is to "create a swing that's consistent from club to club, that doesn't have a lot of moving parts to mess up.". And it works for him.
When did DeChambeau start making his own irons?
When he was 17 years old, under the influence of his instructor at that time plus the instructional book The Golfing Machine (by Homer Kelley, published originally in 1979 ), DeChambeau fashioned his own set of single-length irons (they were all the length of a traditional 6-iron).
Why are metal woods better than persimmon drivers?
In the early days of metal woods, better golfers tended to avoid them because their tech was just emerging and their benefits were mostly for weaker players, who got much more forgiveness out of them than with persimmon drivers. As metal woods matured - the technology, materials and designs improved - they started having appeal to the best golfers, too. Over time - 15 years or so, a relatively short time in golf's history - persimmon drivers disappeared from golf .
When were single length irons invented?
The idea for single-length irons goes back at least to the 1930s, probably much earlier. An antecedent can be found in a set of irons Bobby Jones designed for Spalding, in which every two clubs were the same length (3- and 4-iron were the same length, 5- and 6-iron, and so on). Probably the first true, mass-produced single-length set was ...
Who was the only golfer to win the NCAA Championship and the Amateur Championship in the same year?
And it works for him. In 2015, DeChambeau joined Jack Nicklaus, Phil Mickelson, Tiger Woods, and Ryan Moore as the only golfers to win the NCAA Championship and U.S. Amateur Championship in the same year.
How many clubs does a golfer carry?
The typical golfer carries 12 clubs around with them, and each one is specially designed for a specific purpose. In a game of golf, you’re likely to use each one in your set at least once.
What does the number on a golf club mean?
The numbers refer to the loft – which is the angle of the golf clubface. Adjusting the loft adjusts the height or distance the ball can travel on impact. The lower the number on the golf club, the lower the loft. This means the angle on the clubface is less intense, making the golf ball travel further but at a lower height.
How to keep golf clubs shiny?
If you want your clubs to remain clean and shiny, be sure to make a golf towel part of your golfing equipment. Whenever your clubs get moisture on them, simply wipe it off with your golf towel.
How to remove rust from golf clubs?
You’ll need fine steel wool, a hard bristle brush/ toothbrush, wet and dry sandpaper, white vinegar, metal polish, a bucket, and some rags. Put the white vinegar into your bucket, and wet the steel wool in the vinegar.
What does a low number mean in golf?
The angle on the clubface is going to be more intense, making the golf ball travel higher in the air, but for a shorter distance. So again, low number = low loft and high number = high loft.
What is a putter in golf?
Every single golf club set will feature a putter. A putter is usually fitted with a steel shaft and includes a grip on the shaft where you can rest your thumb.
What is the difference between a 3 wood and a 5 wood?
A 3 wood has a loft between 15 and 18 degrees, whereas a 5 wood can have between 20 and 22 degrees.
Why Don’t the Big Companies Produce Single Length Irons?
Those who have tried single length do tend to stick with it. Those who haven’t tend to ask why the big players in the market like Taylormade and Ping haven’t gone down this road. It is actually difficult to know. Rumour has it that ping did a study on this a few years ago but never released the results.
Who plays all his irons at the same length?
Unless you are living under a rock you have almost certainly heard a little of the biggest story in golf over the last couple of months. Namely, Bryson Dechambeau and his unique swing and club set up. He plays all his irons at the same length (37.5 inches) If you aren’t a regular golfer, you might wonder what all the fuss is about. Seems logical, doesn’t it? For the rest of the golfing population, Bryson has just told us that the earth is flat after all. So what is it all about? Does his unique set up really work? Should you try it to improve your game?
What does the same shaft length mean on a 4-iron?
The benefits are at once obvious and complex. The same shaft length for every iron in the set means the posture, the ball position and the swing itself are exactly the same for your 4-iron as they are for your wedge.
What are the two sets of irons that are sold at traditional golf retail?
Before we go any further, let’s start here: According to industry research firm Golf Datatech, the two sets of single-length irons currently being sold at traditional golf retail—Cobra’s King F7 One and King Forged One , introduced last October—account for less than 2 percent of all irons sold. Impressive, perhaps, but not quite a revolution.
Why is Skaggs single length?
He thinks single-length makes the game easier and less time consuming to both teach and practice.
Who invented the single length iron?
David Edel, the golf inventor who developed the single-length irons that originally helped make Bryson DeChambeau famous, thinks the best way to understand the concept is to go back to the theories of a heretical Franciscan friar of the 14th century.
Is Cobra a revolution?
Impressive, perhaps, but not quite a revolution. Still, Cobra’s team is encouraged. “Most people struggle with golf, and if you give them some simplicity, and then they see some benefit, there’s a good reason to think it will be successful,” said Tom Olsavsky, Cobra’s head of research and development.
Is switching a golf club a fitting?
Of course, such a set presents the same kind of challenge as single-length does: Getting players to switch isn’t about really a fitting, it’s about a longer trial period where a player can actually see whether his scores are changing. That is a hard ask in an environment where golfers are increasingly expecting a launch monitor to spit out a number instantaneously that says a new club is better than an old club.
Is the range of a 9 iron shorter than a 4 iron?
The total range of distance between 4-iron and 9-iron was shorter with the single-length set than with the traditional length, a verdict that independent golf research Dave Tutelman found to be similar throughout single-length designs.
How is distance determined in golf?
But distance isn’t just determined by swing speed, it is determined by loft, launch, and spin too.
Which is faster, the shaft or the swing speed?
The longer the shaft, the faster the swing speed which should result in more distance.
What brand of irons are single length?
Soon after turning pro he signed a deal with Cobra prompting them to release their own single length irons in the form of the F7 and Forged One models. Cobra then introduced the F8 One and are also offering hybrids and wedges in single length too. Wishon are the third brand to offer single length with their Sterling irons.
Why change your swing depending on which iron you are using?
That makes a lot of sense right? Why change your swing depending on which iron you are using? It should help add more consistency to your iron play.
How many yard gaps between 9 irons?
Our tester found on every occasion is that it’s possible to get nice 20-25 yard gaps between the 9-iron, 7-iron and 5-iron in the single-length irons.
Which iron is more consistent?
We’ve found that the strike with the single length irons in the 5 and 4-iron is much more consistent than with variable length irons.
Can you strike with long irons?
We can only speak from our own experiences and we do feel like it it much easier to get a consistent strike with the long irons when using single length irons.
What are the different lengths of golf irons?
A standard set of golf irons has clubs of all different lengths. The shorter irons are the wedges, nine iron, and 8 iron. Then you have mid-length irons and then finally long irons like the five, four, and three iron. As you move up in the set, the irons get quite a bit longer. The problem that this has caused for golfers is ...
Why do people switch to one length irons?
The one primary concern of golfers who switch to one length irons is the fear of losing distance. Nobody wants to lose distance, and this is because the distance is such a strong determining factor in the scores that a golfer can shoot.
Who Are One Length Irons Going To Suit?
One of the groups of players that sees the most benefit from the one length irons is beginners .
How long is a Mazel golf club?
Each of these golf clubs is 37.5 inches long, and they all have the same swing weight. The 431 stainless design helps the Mazel irons be very forgiving and have decent feel as well. Overall these are not going to be the highest performing irons you have ever hit, but they will undoubtedly do the trick to get the job done.
How tall should a golf iron be?
Golfers that choose one length irons should make sure that they are in the recommended height range for this club. If you are taller than 6’0 and shorter than 5’6″ you should look at a custom fitting for the one length. Within this range, then you should be fine to stick with the standard one length golf clubs.
What is a one length iron?
The One Length iron concept is a reasonably new idea in the world of golf. One-length irons have become very popular very quickly. Some golfers will try and have golf clubs cut to length and adjusted to make them a one length set. The technology behind the one length irons is unique and exciting.
Why do golfers put long irons in the bag?
For most amateur golfers, the long irons sit in the bag because they are afraid to use them. If that describes you, then distance should not be a concern when switching to the one length irons.
