Fixing the battery will usually help you resolve the issue of your golf cart clutch not engaging. If you find that the issue does not lie with the battery, then you might have to remove the back cover and take a look at the system to figure out what the issue is. With the rear end jacked up, try throttling the cart.
How to remove a secondary clutch on a Yamaha golf cart?
There are some simple steps involved in removing the secondary clutch on a Yamaha golf cart. Just carefully follow the given steps: First of all, identify the right clutch puller according to the VIN number of the golf cart you are operating. Then use it to remove the drive belt very carefully from the primary and the secondary clutch.
How to fix a golf cart clutch not engaging?
Fixing the battery will usually help you resolve the issue of your golf cart clutch not engaging. If you find that the issue does not lie with the battery, then you might have to remove the back cover and take a look at the system to figure out what the issue is. With the rear end jacked up, try throttling the cart.
Can you fix a clutch on a Yamaha ATV?
Fixing a clutch on a Yamaha ATV is easy and can be done by the backyard mechanic. The procedures are the same as any ATV or motorcycle and can be done in a few hours. All ATVs will need a clutch repair or replacement eventually so knowing how to do it yourself will save you time and money.
When to replace the clutch on a Yamaha G9 golf cart?
When the cart starts, if it produces any uneven vibrations or jolts, it is better to check the clutch and replace it. There can be a slipping problem with the Yamaha G9 clutch.
How do you know if your clutch is bad on a Yamaha golf cart?
What Kinds of Problems Can a Golf Cart Clutch Have?A sudden inability to maintain even slow speeds when heading uphill or changing elevation.Slowing down to a crawl, then speeding up, then slowing again, seemingly without reason.Jolting during startup.A 'cranking' sound when starting up the golf cart.
Why is my golf cart clutch not engaging?
The battery might be the key reason for the clutch not engaging. If the battery is faulty, the clutch systems will fail to generate enough power and will not function. If this is the case, it is advisable to replace or fix the battery and the issue should be resolved.
How does a Yamaha golf cart clutch work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do you remove the rear clutch on a Yamaha golf cart?
0:157:43Secondary Clutch Replacement Golf Cart G2-G22 Yamaha - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're gonna do order into one I'm gonna put another one on here all right first thing you want toMoreSo we're gonna do order into one I'm gonna put another one on here all right first thing you want to do is take this nut off rare. Which is a 17 milk okay I'm just gonna hit this with the impact.
How do you fix a clutch that won't engage?
2:263:28How to Fix a Car that Won't Go into Gear (Clutch Master) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd that so air can come out here then we has a giant screwdriver stick it on a clutch pedal. AndMoreAnd that so air can come out here then we has a giant screwdriver stick it on a clutch pedal. And pull the seat. Forward got all that in place then we tighten the line up.
What is the most common problem associated with clutch?
Experiencing Clutch Problems? Here Are The Most Common Issues.The master or slave cylinder might start to leak. Hydraulic and cable-operated are two kinds of clutches. ... The throwout may wear out. ... The clutch disc may be worn out. ... The flywheel may become warped. ... Your pressure plate may be worn out.
Why would a centrifugal clutch not engage?
Centrifugal Clutch Won't Engage If your clutch won't engage, It usually means that the engine idle speed is different to the clutch idle speed. This can result in damage. To correct this, change the spring or change the engine speed to below the clutch idle speed.
How do you tighten a clutch belt on a golf cart?
Now, with the new drive belt follow these steps in the reverse; wrap it over the rear pulley first. Stretch the belt over the front pulley. You will have to pull the front clutch pulley a little forward to create tension on the belt. Tighten the tension bolt using a wrench.
How does a secondary clutch work on a golf cart?
At rest, the drive clutch faces (sheaves) are separated by the wide drive belt. The driven (or secondary) clutch bolts onto the input shaft of the differential. The driven clutch sheaves are spring loaded together and the belt, at rest, rides up at the outer edge.
How do you take the clutch out of a golf cart?
2:337:16Yamaha Golf Cart Primary Drive Clutch | How to Remove and InstallYouTubeStart of suggested clipEnd of suggested clipUp okay now take the main bolt out. Now that I've got this main bolt loosens with an air ratchet.MoreUp okay now take the main bolt out. Now that I've got this main bolt loosens with an air ratchet. Take a large screwdriver stick between the spider push it down just as help steady.
Can you adjust a golf cart clutch?
If you are unsure about removing the drive belt or the clutch, then you can adjust it. Just take out the belt and wound it again with the secondary clutch according to the requirements, and your problem should be fixed.
How do you remove a centrifugal clutch?
1:173:15how to remove a stubborn centrifugal clutch off of a go kart - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this is the housing of the clutch. And I just cut through this side and then took my chisel onMoreAnd this is the housing of the clutch. And I just cut through this side and then took my chisel on beat on that side and weakened it on one and pried. It off pulled.
Why would a centrifugal clutch not engage?
Centrifugal Clutch Won't Engage If your clutch won't engage, It usually means that the engine idle speed is different to the clutch idle speed. This can result in damage. To correct this, change the spring or change the engine speed to below the clutch idle speed.
How do you fix a clutch on a club car?
Cleaning the clutch thoroughly might be the simplest solution to this problem. You could also try lubricating the system with a good quality lubricant. This might free up the clutch and thus prevent the squeaking noise. Another common reason could be due to the weights present inside the system hanging up.
How do I know if my golf cart belt is bad?
0:152:00How to Check the Belts in your Gas Golf Cart | Golf Cars UnlimitedYouTubeStart of suggested clipEnd of suggested clipDown below and you don't want to press the moderate pressure on that belt you're gonna want to seeMoreDown below and you don't want to press the moderate pressure on that belt you're gonna want to see about 3/16 to 1/4 inch of deflection. There no more than that that'll be your proper.
What does the secondary clutch do on a golf cart?
Yamaha driven clutches are better known as a secondary clutch. This clutch attaches to the rear end and is used to propel your golf cart to higher speeds. The clutch is closed until the motor turns over.
How to stop clutch from coming apart?
Gently place the crowbar behind the clutch and apply pressure. The clutch might slide off and come apart. Make sure to add even pressure at the same intervals otherwise you might end up breaking a part. If none of these techniques work, you can try cutting some relief on the clutch.
Why is my clutch not engaging?
Sometimes a belt that does not have the correct tension and is loose may cause the clutch to not engage properly. It might help to clean out any rust on the clutch system as this could also be the cause of this issue. Rectifying these problems could help resolve the clutch issue.
Why is my cart not smooth?
When you’re driving up a hill or even on a flat surface and notice that the cart transmission is not smooth, then it clearly indicates that the issue lies with the clutch system. Another common problem a lot of people face is a jerky start. The cart while starting up might give out a few jerky movements.
Why does my clutch make a squeaking noise?
Sometimes this issue of the clutch not fully engaging but slipping could be caused due to the dirt build-up inside .
Why does my clutch get stuck?
Another cause could be a bad spring. Sometimes, if the spring in the system is bad, it could cause the clutch to get stuck. Try replacing the spring and check if the problem is resolved. If none of these work, you might have to replace or rebuild the entire clutch system.
What is CVT in golf carts?
Golf carts have a special technology called CVT which stands for Continuous Variable Technology . This technology allows the user a smooth drive without having to worry too much about changing gears. Every golf cart will have a clutch consisting of two parts namely the primary clutch and the secondary clutch.
Can a clutch be smooth?
If you’re driving up a hill, any problems with the clutch can be easily noticed. The clutch system will not be smooth and the speed will be erratic. These are some of the common problems observed due to issues with the clutch system.
How to remove secondary clutch on Yamaha golf cart?
Just carefully follow the given steps: First of all, identify the right clutch puller according to the VIN number of the golf cart you are operating.
What is wrong with my golf cart clutch?
If there is any problem in how your golf cart runs, you can check for the following problems: There might be a problem with the belt. Check if the belt is too tight or loose.
How to remove clutch on EZGO golf cart?
How to remove a secondary clutch on an EZGO golf cart. First of all, make sure that the golf cart is turned off, and the brake is in place. Make sure to put pressure on the gas pedal. Use a clutch puller to remove the drive belt. Loosen the central bolt using an air gun.
Why does my golf cart clutch slip?
There can be a problem with the drive belt, which can cause the clutch to slip. Sometimes the installed belt drive may not match the clutch in the golf cart, causing problems. Just replace it, and you are good to go. Check if the belt drive is misaligned. This is also a common problem with the clutch.
What is clutch puller?
They are the clutch puller, an air gun, machine oil, and a rubber hammer. It is necessary to be gentle in the process because if you use excessive force, then the transmission may be damaged. So, take great care while adjusting the clutch and use the clutch puller that matches the cart’s model.
What to do if you have a problem with your G16 golf cart?
If there is any problem with the secondary clutch, it is best to replace it or the drive belt connected to it. If you are unsure about removing the drive belt or the clutch, then you can adjust it.
How to find primary clutch on golf cart?
There are two clutches in the golf cart. To locate the primary clutch, it is generally the lower one. Consult the cart’s manual to make sure. First, observe exactly how the drive belts have been adjusted to the clutches. After you have noted that.
What happens when your golf cart clutch is working?
Essentially, when your golf cart clutch is working, you're assured a smooth start-up and take off, as well as a largely smooth acceleration and braking.
How to tell if a golf cart is bad?
Watch out for these telltale signs of a malfunctioning golf cart CVT that is in need of repair or replacement: 1 A sudden inability to maintain even slow speeds when heading uphill or changing elevation 2 Slowing down to a crawl, then speeding up, then slowing again, seemingly without reason 3 Jolting during startup 4 A 'cranking' sound when starting up the golf cart
What is CVT clutch?
The CVT is comprised of two separate clutches that are connected by a thick drive belt. When we refer to the clutch or CVT, we're referring to two components — the drive clutch (or primary clutch) and the driven clutch (or secondary).
What does it mean when a golf cart starts jolting?
Slowing down to a crawl, then speeding up, then slowing again, seemingly without reason. Jolting during startup. A 'cranking' sound when starting up the golf cart.
What does CVT mean in golf carts?
The golf cart clutch or CVT (which stands for Continuously Variable Transmission) may be easy enough for you if you're used to stick-shift driving with your regular vehicle. However, because many people these days don't drive stick-shift, they have a difficult time adjusting to the clutch when they purchase a new or preowned gas-powered golf cart.
Drive
The drive, or primary, clutch is found on the crankshaft of the engine. A thick, heavy ‘drive’ belt is wrapped around it and links it to the driven clutch, on the differential. At rest, the drive clutch sheaves (or pulley halves) are separated enough that the drive belt rests in between the sheaves & against the center shaft of this clutch.
Driven
The other half of this system is the driven, or secondary, clutch. At rest the driven clutch sheaves are spring loaded together, so the belt sits up at the outer edge of this clutch, NOT down toward the center shaft. It, too, spins around and has a sheave that sides in & out along it’s main shaft but this clutch has no flyweights.
Belt Operation
As the drive belt forces the driven clutch sheaves to separate, the PULLING ratio of the engine changes from maximum (when the belt is at the outer edge of the driven unit) to minimum PULLING power, or top cruising speed (when the sheaves are completely apart).
Driven Issues
The driven clutch can misbehave in many ways. It has one main shaft and the sliding sheave has an internal bushing that will wear, and it has several inclined metal ramps (usually aluminum) with small plastic buttons that protect the ramps as they glide against one another.
Buttons
OK picture this: The engine revs up and the drive belt starts to ride down into the pulley faces of the driven clutch forcing them to separate. The inboard pulley half begins to slide along the main shaft compressing the spring and bringing the funky cup ends and their respective ramps up against one another.
Driven Spring
While we are on the Yamaha driven clutch another failure that occurs is almost impossible to detect but it also impairs the hill pulling power of the car. Keep looking inboard to where the funky spring cap butts up against the differential housing. The spring cap doesn’t actually touch the differential case.
CVT Components
On a golf cart, the CVT is comprised of three parts; the drive clutch or primary clutch on the engine, the driven or secondary clutch on the differential, and the belt which connects the two. As the rpms of the engine increase, the drive clutch spins with it and with the use of flyweights and centrifugal force, the clutch pulls inward on the belt.
Drive Clutch
Let’s start with the removal of the drive (primary) clutch which is mounted on the crankshaft sticking out of the engine. Before beginning the golf cart clutch removal of either clutch, you must first remove the drive belt. At rest, it is loose enough where you can just work it over the clutches. Once removed, you can then remove the drive clutch.
Driven Clutch
As for the driven or secondary clutch, although it may seem easier to remove, it is often the hard one to tackle. When the bolt is removed from the center of the driven clutch, there is literally nothing else holding it on. It is not generally a tapered fit like is used on the drive clutch.
How to remove oil from ATV?
Drain the oil from the ATV by unscrewing the drain plug under the engine. You might have a skid plate obstructing the plug. If so, remove it first. Remove the clutch cover with a socket and ratchet. Inspect the gasket and replace if it is worn, cut or ripped. Remove the pressure plate by loosening the bolts. Unscrew in a crisscross pattern so the ...
How to remove a pressure plate?
Remove the pressure plate by loosening the bolts. Unscrew in a crisscross pattern so the pressure plate slides off smoothly and won't pinch. There are springs behind the bolts, so be careful not to lose them. When removing the pressure plate, pay attention to the lifter behind it. Don't lose it.
