The subject of FLO (Flat Line Oscillation) refers to how the golf shaft and is supposed to oscillate when loaded in your back swing through ball impact. Why FLO Matters All clubs experience some amount of oscillation during the swing. The goal of Flo Plane Orientation is to align the shaft and club head in a straight line (plane).
How do you align a golf shaft?
1:503:31How to Find the Spine of a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you want to mark at the top of the shaft for each time that. It. You feel it click into place.MoreThen you want to mark at the top of the shaft for each time that. It. You feel it click into place. And you'll see each time I do this. It's going to pop into the same. Place.
What is Flo in golf?
The subject of FLO (Flat Line Oscillation) refers to how the golf shaft and is supposed to oscillate when loaded in your back swing through ball impact.
Where should the spine be on a golf shaft?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o'clock or 9 o'clock position – also called the neutral position.)
What swing speed requires a stiff shaft?
between 97 and 104 mphStiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall.
Is spine alignment necessary?
Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.
Do you need to spine a golf shaft?
Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining. ' Golf shaft makers today typically pre-spine their shafts, so spining is not as common as it once was after-market. Recreational golfers don't need to worry about spining their golf shafts.
How important is arrow spine alignment?
Having the shafts spine aligned isn't really more critical from one venue to another if you're looking for as much accuracy as you can squeeze out of your equipment. For a hunting arrow it helps a lot because fixed blade broadheads will typically perform better when the arrows are as consistent as possible.
What do you do if your spine is out of alignment?
Chiropractic adjustments, spinal decompression therapy, and other chiropractic methods can be used to address the misalignment causing these issues for pain relief and higher energy levels.
How do you build a shaft spine Finder?
1:0812:22How to Make a Golf Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the one I'm using to put where you put the shaft through it right you bend it down itMoreThis is the one I'm using to put where you put the shaft through it right you bend it down it rotates around and finds the spine.
What flex do I need for my irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
What is a good swing speed for a 7 iron?
An average golfer will swing a seven iron about 75 mph. This number can change based on the weight of the club and if it is steel or graphite. The faster you swing a seven iron, the further it will go. If you can swing at about 85 mph, you will see distances closer to 165 yards.
How do you determine what shaft flex you need?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What causes a flyer out of the rough?
Most commonly fliers will occur from shortish rough where small amounts of grass, dirt or moisture will get trapped between the club face and the ball. I have seen fliers occur from the fairway, but that is most often due to the playing surface being wet.
What is a fly or lie in golf?
0:111:37The Flyer Lie Defined & Explained - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook something like this it's the balls laying in some light rough. And if you notice the grain ofMoreLook something like this it's the balls laying in some light rough. And if you notice the grain of the grass is growing towards the target. Okay.
What does a flyer lie mean in golf?
Traditional golf instruction tells you that when your ball is sitting in light rough, you have what's called a 'flyer' lie. At impact the grass will come between your clubface and ball, producing a shot with little backspin - sort of a knuckleball.
How do you judge a flyer?
Light rough should not cause a flyer lie. If your ball is in full or heavy rough, and is still touching the ground, then you likely have a flyer lie. If the ball is in heavy rough but is held off the ground by the grass, then you have a “fluffy lie,” which must be played differently than a flyer lie.
What is the principle plane of oscillation?
All Shafts have a Principle Plane of Oscillation. The subjects of “Spining and FLO” go hand in hand together when dealing with perfecting shafts for your clubs. The subject of FLO (Flat Line Oscillation) refers to how the golf shaft and is supposed to oscillate when loaded in your back swing through ball impact.
What is the purpose of Flo?
The purpose of FLO is to identify the most stable plane (as per SST PURE or the process of Puring). So, Flo Plane Orientation identifies the weak and strong oscillation planes on the shaft. The stable plane will provide FLO for the shaft during swing motion. A spine finder is used to find the natural bend point (NBP) of a shaft, ...
What is a spine finder?
A spine finder is used to find the natural bend point (NBP) of a shaft, and then used as a reference point to find FLO. The NBP is the weak plane and the strong plane (not necessarily the spine) is 90 degrees opposed. The stable plane should be installed to face the target.
What is a non-flat line in golf?
A non-flat line consists of oscillation in a circle or an oval pattern. Which means the club face is on a wobble coming into impact. Therefore, the golfer’s shots tend to spray, due to uneven contact with the club face and ball.
What does a non linear pattern on a golf club mean?
Obviously, a non-linear pattern indicates erratic behavior by the club when loading it and striking the ball.
Is a golf shaft symmetrical?
Although produced by computer-aided precision tools and machines, golf shafts are not perfect. They are considered to be asymmetrical – not symmetrical. Symmetrical balance is when everything is perfectly and evenly balanced out. Asymmetrical balance refers to a design that has dissimilar elements but still appears balanced.
Can you orient a golf shaft into the club head?
Hence, it is possible to orient a golf shaft into the club head at a specific position to maximize its capability and performance. Studies have shown that factory installed shafts can have a full flex variance between certain clubs. It all depends where and how strong the spine is located.
mvhoffman
Title pretty much sums it up. Do most "builders" (basement builders like me) do a FLO test?
Golfrnut
I would say that "most" do not. There are tons out there that glue clubs together, not nearly as many that actually focus on any kind of "blueprinting" or really tight specs. I've bought enough "used" equipment in my lifetime to solidify that opinion in my mind.
mvhoffman
Obviously not based on any reliable source but I actually get the impression it's a bit more common with hobbiests than professional builders (but still not even close to being at the level of 'most').
QuickFeet
Title pretty much sums it up. Do most "builders" (basement builders like me) do a FLO test?
Hot Rod 71
All of the Tour Van builds I've seen on YouTube do not include a FLO process. The tech usually pulls a shaft, cuts to length, and then build with the graphics up or down (depending on player preference).
mvhoffman
All of the Tour Van builds I've seen on YouTube do not include a FLO process. The tech usually pulls a shaft, cuts to length, and then build with the graphics up or down (depending on player preference).
pinhigh27
All of the Tour Van builds I've seen on YouTube do not include a FLO process. The tech usually pulls a shaft, cuts to length, and then build with the graphics up or down (depending on player preference).
neonlew
I just started playing around with finding the flo in shafts, but need some input from anyone using this method. I am placing a tip weigh which is 200 grams, then a laser device which is 62 grams.
glock35ipsc
FLO = Flat Line Oscillation. So yes, a flat line, not one that oscillates in a circle or an oval. Flat line back and forth, or up and down (however you have the shaft positioned in the clamp).
moparman426
It's explained in the last few seconds in the video that is posted above. He is just doing it with a club head instead of a laser. He marks the top, so 90 degrees from the FLO plane, and installs the shaft with that mark parallel to the club face. As for aligning to the target line, that is usually just for spining.
neonlew
LBlack14, I am simply trying to see what the best answer is for aligning a shaft that has been marked in the FLO position.
moparman426
Once you have found the FLO, do you epoxy the clubhead with the FLO mark aligned at the 12:00 position as moparman426 states in his reply? I am just trying to get my set of irons and other clubs properly fit so I can hit the ball without any clubhead wobbling while coming into impact.
neonlew
Yes, when I find the FLO I place a piece of tape on the top of the shaft and make a straight line with a marker. So based on what you said, then the 12:00 position is the way the shaft should be installed in the club head, not at the 3:00 position.
neonlew
Guys, thanks for you input. I now know exactly how to place the FLOed shafts in my iron heads.
What is the plane of oscillation when you FLO a shaft?
If you FLO the shaft you are not finding the "spine", you are finding the shaft stable plane of oscillation. To find the "spine" you would also have to use a spine finder. They are different tests. With FLO you put the shaft so that the horizontal oscillation plane is in the 9 to 3 plane.
Does the GM1011 work with the shaft tip adapter?
No the GM10 11 does not work with the shaft tip adapters. The GM1013 Shaft Adapter FLO Tracer works with the shaft adapters. https://www.golfworks.com/golf-mechanix-shaft-adaptor-flo-tracer/p/gm1013/.
Does it matter when you install a shaft?
It really does not matter as long as when you install the shaft the FLO or oscillation plane is going to and from the target. If you FLO in a horizontal plane and mark the shaft on top you would put the mark on top of the shaft when it is installed so that you would see the mark when the club is in the address position.
