- Club length is fut to optimize for accuracy, distance, and posture.
- Club head design is chosen with look, feel, and desired level of forgiveness in mind.
- Based on the characteristics of your swing, your fitter will recommend shaft material (graphite or steel), shaft weight, and shaft flex. ...
Full Answer
Where to get custom fit for golf clubs?
Oct 30, 2019 · That means that your club can be independently adjusted to precisely fit your game with the help of a special wrench. You can adjust the lie of your club from a square position to either more open...
What do you need to know about golf club fitting?
8 rows · May 28, 2020 · Most professional club fitters start the process with an interview consisting of a short question ...
Are custom fit golf clubs worth it?
Golf Club Shafts to Fit Your Swing. There are three big factors to consider with your golf shafts: flex, length, and torque. Here’s how each of those works with your swing. Flex: Golf clubs are rated by five different types of flex, and each flex is designed for a specific "load” factor.
How do you get fit for golf clubs?
Jan 12, 2015 · In terms of what to expect, Grabowy said that fitting a player for a full set of clubs will take about two and a half hours and include "educating" a player about his or her needs. The fitting process also remains pretty much the same for woods, irons and wedges. "It's all about matching the shaft to the swing," Grabowy said.
How does getting fit for golf clubs work?
After the interview process, the fitting begins by analyzing the golfer's performance with their current set of clubs. For woods, drivers, and irons, a fitter will observe the player with usage of a launch monitor to quantify specific aspects of ball flight or club delivery for further analysis.Sep 19, 2018
Is it worth getting fitted for golf clubs?
Is it worth getting custom fit golf clubs? The simple answer is yes, it's definitely worth getting custom fit golf clubs. If you were to look at the back of a typical set of off the shelf clubs, they would usually have various markings on them as well as loft and lie angles.
Does club fitting really work?
And the answer is absolutely yes, it's worth getting fit for clubs you already have. Especially if you're 5-foot-5, since a stock set of clubs isn't likely to have the proper lie angle for you. Luckily, if that's the case, it's not a difficult fix.Oct 4, 2019
How long does a club fitting take?
As a general rule a golf club fitting should take between 45 minutes and 3.5 hours. Full bag fittings take the longest but ittings can also be done in club 'groups' such as 'wood' or 'iron' fittings and these take 1.5 to 2 hours. Individual club fittings take a minimum of 45 minutes and can take 1 to 1.5 hours.
How much does a full bag fitting cost?
If you want to get your entire bag fitted, the average cost will be $275. If you want to get an individual club fitted (driver, wood, irons, wedges, putter), it'll cost you somewhere around $100 each.
How do I prepare for a golf club fitting?
5:287:03How To Prepare For A Golf Club Fitting - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you're getting fit for irons at least bring your seven iron if you're getting fit for aMoreBut if you're getting fit for irons at least bring your seven iron if you're getting fit for a driver bring your current driver. Because it's always good to have a baseline.
How many strokes will a club fitting save?
The approach seems to be effective. A Golf Digest study found that eight out of nine Club Champion custom-fit golfers lowered their scores by as much as six strokes per round and added as many as 21 yards off the tee.
How much of a difference does club fitting make?
Therefore, simple math indicates that a 20-handicap would improve their handicap by at least two strokes by using properly fit golf clubs, whereas a 1-handicapper would knock 0.1 strokes off their handicap.Dec 15, 2020
Is club fitting worth it for beginners?
How does club fitting help a beginner golfer? Getting fitted as a beginner can help build positive swing habits on the golf course. Having the correctly customized clubs can prevent problems like hooking the ball, slicing the ball, or hitting it thin or fat.Nov 29, 2020
How much does iron fitting cost?
The actual fitting is the affordable part of the process. The average golf club fitting cost will run you between $100 and $200. That fee is just for the fitting professional to analyze your current setup and suggest the best path forward.Sep 6, 2021
Should you get golf lessons or club fitting first?
If you really want to improve, there's a lot of value in properly fitted equipment before, during and after any swing changes you make from golf lessons. So if you've been wondering whether you need lessons before fitted clubs, it's not necessary. The combination of both is really the best way to shoot lower scores.Sep 14, 2018
How long do golf fittings last?
Fittings last for approximately 2 hours. Spargo Golf takes time to measure your existing clubs, take static measurements, and conducts a brief interview to determine the Golfer's goals and desires.
What is custom fitting in golf?
For example: having a driver that’s fit to your swing can help you optimize your ball flight, which will increase both your distance and accuracy. In fact, the majority of golfers who went through a custom fitting added over 20 yards to their drive and lowered their scores by as much as five strokes per ...
What can a professional golf club fit do?
One of the most important things a professional club fitting can do for you is analyze your swing- something that’s quite difficult to do on your own, especially without the advanced technology used in the process.
What is a pre fitting interview?
Most professional club fitters start the process with an interview consisting of a short question and answer session between the fitter and the golfer. This allows your fitter to better understand your needs, goals, and concerns about your game.
Why is it important to have a putter length?
Proper putter length will help your stance, line of sight, and improve your overall consistency – both distance and control. Finding the best loft for your stroke will help with your putt’s roll and distance control. The lie of your putter is critical for maintaining directional control.
What happens when custom built golf clubs arrive?
When your custom built clubs arrive, your fitter will inspect them to make sure the fit is perfect. You’ll come in to verify your clubs, which may involve shooting them on the launch monitor to confirm performance.
What percentage of golf clubs are putters?
The putter accounts for 40% of your game, making it the most-used club in your bag. Having a properly fit putter can make a huge impact on your game. The fitter will help determine which head style best matches your putting style. Once you’ve selected a putter, it will be fit for length, loft, and lie.
How long does it take to fit a golf club?
Fitting a player for a full set of clubs usually takes around three hours from start to finish. Most professional fitters have the option of fitting for the full set, but also provide fittings for specific club types. Refer to the table below for some common guidelines:
How to measure for golf clubs?
To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.
Why do people buy off the rack golf clubs?
In fact, players with a higher handicap have a game that can be much more drastically improved with the use of custom-fit clubs that help to train the swinging motion properly .
How many miles per hour do you swing?
It'll be difficult to do at home. In general, though, most amateurs fall somewhere in the neighborhood of 80–85 mile (129–137 km)-per-hour swings. In general, people with faster swings prefer stiff shafts on their woods and iron shafts on the irons.
What are the factors to consider when selecting a golf shaft?
There are three big factors to consider with your golf shafts: flex, length, and torque. Here’s how each of those works with your swing. Flex: Golf clubs are rated by five different types of flex, and each flex is designed for a specific "load” factor. “Load" is a result of Club Head Speed (CHS) within a certain time frame.
Why is a bigger grip better for golf?
A lot of golfers now prefer a slightly oversized grip. A larger grip can help you keep the lighter pressure on the club, allowing you to swing fast er to generate more speed and distance . That lighter pressure can also reduce fatigue in the hands, making larger grips good for golfers with arthritis or tendonitis.
Why is a softer shaft better?
Some prefer a softer flex because it allows them more control and gives them a smoother swing. However, if your shaft isn’t stiff enough you might give the ball too much loft. It’s important the tempo and length of your swing match your flex. If a shaft is too stiff, you’ll swing too fast and won’t produce enough spin.
What happens if your golf shaft is too stiff?
If a shaft is too stiff, you’ll swing too fast and won’t produce enough spin. If It’s too soft, you can put too much spin on the ball and lose distance and consistency. Length: Having the proper length of your clubs is essential to making a good swing.
Why do slower swing speeds need more loft?
Slower swing speeds will want more loft in order to help get the ball in the air for better hang time and longer shots while faster swings (and ball speeds) create lift on their own and don’t need as much loft. Most of today’s drivers are available in (or able to be adjusted to) “draw bias”.
What is the angle of loft on a driver's face?
Loft: Another factor to look at is the angle of loft you want on the driver’s face, which is usually between 8 and 14 degrees. The appropriate loft is actually determined by how the player tends to strike the ball, whether they hit up and lift the ball into the air or hit down and through, like an Iron.
Why do you lie in golf?
Lie helps the club move through the turf for more consistent results, as well as helping counter your misses. Then you’ll want to select your shaft and flex. It’s important to be fit for the proper weight and flex in your shafts in order to get the best distance and consistency from your shots.
Why is club fitting so difficult?
Challenges often arise with club fitting because of preconceived notions that customers have. Those who pursue professional club fitting need to approach the process with an open mind and not let their expectations -- or egos in some cases -- interfere.
How long does it take to fit a golf club?
In terms of what to expect, Grabowy said that fitting a player for a full set of clubs will take about two and a half hours and include "educating" a player about his or her needs. The fitting process also remains pretty much the same for woods, irons and wedges.
What is a PXG fitting specialist?
PXG Fitting Specialists are PXG product and fitting experts, trained by the engineers who had a hand in designing our golf clubs. PXG even has a training and fitting sciences expert on staff to help refine and develop processes to ensure our team consistently delivers ...
Is it scary to wear a golf club?
Wielding a golf club as a beginner under a fitting professional's watchful eye can be scary, but it’s not as scary as playing a round with ill-fitted equipment. Much like running a marathon for the first time in shoes that are two sizes too small, it isn't fun and you won't ever want to do it again.
Why do you need custom fitting clubs?
Improves Scoring. As touched on above, custom-fitted clubs make it easier to achieve consistent contact, thus improving accuracy. As accuracy and scoring often go hand in hand, club fitting can be a great way to see immediate improvements to your game and drop your handicap.
Why is the shaft important in golf?
The shaft is essential for the consistent performance of the golf club. Many experts would even argue it’s the most important part of the club. In fact, one club-fitter compares the club shaft to the transmission of a car. “The shaft is similar to the transmission of a car.
What is brand agnostic fitting?
Many custom club fitting companies offer what is known as brand agnostic fitting, meaning they do not just specialize in one club manufacturer. Instead, they have hundreds of shafts and clubheads from various brands.
What is the most important factor in golf club distance?
And as we know, clubhead speed is one of the most important factors for distance. Also, with fitted golf clubs, you’ll find it much easier to make consistent contact with the “sweet spot” of the club. Quality contact is essential to maximizing your distance.
Why does shaft weight matter?
Shaft Weight. Regardless of your ability or handicap, the weight of the shaft matters because it determines the total weight of the club. One of the main goals behind custom fitting is that you get a golf club in which the total weight matches your swing tempo. This helps with timing and improves consistency.
What is the best thing to do with a brand agnostic fitter?
Going with a brand agnostic fitter instead of your local pro shop or golf store is the best thing to do. Most pro shops or golf stores have some kind of relationship with specific club manufacturers. This usually means they are provided with incentives to sell a certain amount of a particular manufacturer’s inventory.
Why do you need a one year buffer before fitting a golf club?
This is likely because it leads to more consistent strikes with much less effort.
How to set yourself up to play golf?
In conclusion, here are the recommended steps to take in order to set yourself up to to play great golf and enjoy the game for years to come: 1. Get a basic club consultation from an expert. 2. Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs) 3.
What happens if a golf club is too short?
If a club is too short, too long, too light, too heavy, the lie angle is completely wrong, the club itself is the wrong design, or any of a number of factors are off , you could be setting yourself up for failure. The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
What clubs should I use for Sones?
Sones recommends beginning students start with just a few clubs that fit correctly. For example, you can start with just a sand wedge, a pitching wedge, a 7-iron and a driver. This gives you a few proper tools to learn with. Once you get a few clubs or a full set that’s in the right wheelhouse for your skill level, physical size and budget, ...
Why is it important to get fit for beginners?
“It’s very important that beginners get fit because we develop our swings around the gear we use without even realizing it ,” Briand says.
Does Daniel Berger use cavity back irons?
Daniel Berger uses cavity-back irons from 2011! Many amateur golfers of varying skill levels stunt the improvement of their games by believing they’re “ not good enough ” to get a club fitting. They say that once their golf game starts to improve they’ll invest in a professional fitting, but it’s not worth it yet.
Will my swing patterns change?
It is likely that your swing patterns will change after a number of lessons. Your angle of attack may change, your method of releasing the club could shift, and you will (hopefully) gain some speed and strength, too.
What is section 13 in golf?
Section 13 is all about drivers and driver fitting (47 pages). The information in these sections has never been published before and provides valuable insights into helping golfers play better. Section 10 is devoted to the needs of women golfers, senior golfers and junior golfers.
Does the GCFP cover club repair?
No the GCFP does not cover club making and repair. The GCD4 has clubmaking and repair. https://www.golfworks.com/golf-club-design-fitting-alteration-repair/p/GCD4/. We also have these You Tube video's that cover clubmaking and repair as well as fitting and club design. https://www.youtube.com/golfworks.
