After heating the hosel for about 30 seconds, grasp the head with your gloved hand and twist. If the head does not loosen, repeat heating in 15 second increments until it can be removed. Note: Some older heads are pinned in place. If in doubt, visit your local Golf Galaxy retail store for advice.
Full Answer
How to replace a golf shaft?
Choose the right shaft, uninstall the current shaft, and then follow the steps to install the new shaft. The part right above the clubhead is called hosel. After the hosel, there is ferrule that holds the hosel and shaft together. Check the shaft tip and make sure to measure everything properly.
How do you know when to replace golf clubs?
You’ll know when to replace golf clubs by the way they look, feel, sound, and perform. If you’re unsure, see a golf professional at least on a yearly basis to determine if your clubs are still meeting the golf clubs standard measurements.
How do you remove a graphite shaft from a golf club?
If in doubt, visit your local Golf Galaxy retail store for advice. Graphite Shafts: To remove a graphite shaft, place the shaft in a graphite shaft extractor following the instructions that came with the tool. Heat the hosel with a heat gun while wearing leather gloves. Slowly turn the extractor's threaded bolt with a box wrench.
How do you fix a broken shaft on a club?
Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets the club head.
How much does it cost to switch golf shafts?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How often should golf club shafts be replaced?
Again, you'll want to invest in irons with steel shafts rather than graphite shafts. A good rule of thumb to follow is if you're a golfer with a low handicap or just a casual golfer is to replace your golf irons somewhere around every four to five years or after around three hundred rounds.
How easy is it to change a golf shaft?
Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
How long does it take to replace a golf shaft?
It takes 24 hours to reshaft a golf driver. The actual time depends on the epoxy used for this process. If you use an epoxy such as the Tour epoxy, you can get done with the reshafting process really fast and your driver will be ready to use in about half an hour.
Are 20 year old golf irons still good?
There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.
Should I replace 20 year old irons?
Unless you play a ton and shut down the range nightly, there's no reason a set of irons shouldn't last five to ten years. In terms of tech, it depends what you want in your irons. If you play traditional forged irons, nothing substantial has changed in decades.
Is it hard to Reshaft a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
How much does it cost to Reshaft a driver?
What is this? The cost of replacing the shaft, excluding the shaft, is in the range between $25 and $45. This includes the cost of the grip and approximately $20 in labor cost. Adjustable shafts may require a sleeve adaptor that can set you back in the region of $14.
Is it worth Reshafting my irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How long does it take to Regrip golf clubs?
It will take you a little over an hour to regrip your golf clubs. This would be if you have all the supplies in place, and you are good at completing the regripping. If you don't have the proper tools and you struggle with the actual regripping process, you will likely take about two hours to get this project done.
What shaft is best for my driver?
Briand's recommendation is to use your current driver shaft as a baseline. If your shots tend to be low and with little spin, try a slightly softer flex. If your shots are ballooning, try a stiffer flex. If you're caught between two flexes, you can “tip” a softer flex to make it stiffer in the tip section.
How much does it cost to Reshaft a golf club UK?
Iron RepairsReshaftTrue TemperLoft & Lie From}£4.50 } per club}Lead Tape, 1 Yard£4.00Re-fit Loose HeadFrom £8.5020 more rows
Do golf shafts wear out over time?
So yes, golf clubs do eventually start to wear out and will need replaced. For the average golfer this will take some time but you need to just be aware of what can go wrong if you don't replace your clubs often enough.
Do golf shafts degrade?
Yes, especially on wedges, where you're hitting out of the sand. So those should be replaced conservatively every three years, more often the more you play. That happens with iron grooves, too, but on a much longer timeline.
Do iron shafts wear out?
Eventually, given enough exposure to weathering forces, a modern golf club shaft will wear out. But this isn't something you should stress about, unless you're a PGA Tour player with millions of dollars on the line. You're more likely to bend, break or lose your graphite irons before you ever need to replace them.
Is it worth Reshafting my irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Feedback
24 hrs. is always a safe rule of thumb. You could probably get away with playing them sooner, but it's not worth the risk of having the head fly off in the middle of the driving range, which I have seen happen before.
Feedback
Likewise. The epoxy used makes the rule as to curing time. Personally I use 5 min. epoxy on my clubs and am confident therein but club makers need to satisfy their customers and so will use either 12 or 24 hour epoxy. Talk to your club maker. Shambles
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
How to put shaft on club head?
Insert the shaft into the club head's hosel. Rotate the shaft while sliding it in and out of the hosel, evenly coating the shaft and hosel with epoxy. Align the shaft graphics the way you want them by rotating the shaft. Then, tap the butt end of the shaft on the floor to seat the tip against the bottom of the hosel bore.
How to remove graphite shaft?
Graphite Shafts: To remove a graphite shaft, place the shaft in a graphite shaft extractor following the instructions that came with the tool. Heat the hosel with a heat gun while wearing leather gloves. Slowly turn the extractor's threaded bolt with a box wrench. If the head does not loosen, reapply heat to the hosel.
How to remove a steel shaft from a metal?
Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. If there is a plastic ferrule in place, wrap a wet paper towel around it to prevent burning. While wearing protective leather gloves, aim the flame of a torch at the hosel.
How big is a wood shaft tip?
Most iron shafts have a .370 of an inch tip and most wood shafts have a .335 of an inch tip. Follow the tip trimming instructions to trim the tip end of your new shaft so it matches the size of the shaft you extract. After the tip has been trimmed, abrade or roughen the shaft tip.
How to fix a club head that is stuck to the shaft?
Step 1. Scrape off the ferrule at the bottom of the club head's hosel with a utility knife. Place the club into a shaft clamp to hold it in place while you work on the head. Use a heat gun to heat up the area around the hosel to soften the epoxy glue that connects the shaft to the club head.
How to remove epoxy from golf club?
Remove the club from the shaft clamp and tap the butt end of the grip on the floor to push the shaft all the way into the head. Wipe down the hosel with a soft cloth to remove any epoxy residue. Let the epoxy dry for several hours before using the golf club.
What is the hosel on a golf club?
The hosel is the junction point between the head and the tip of the shaft. Check the size with a shaft identification gauge if you cannot find it on the label.
Can you replace a golf club shaft yourself?
It's usually best to consider having shaft replacement done by someone who knows what they are doing. Instead of paying the pro shop the next time you need to change a golf club shaft, save money by doing it yourself at home. Make sure your replacement shaft is the same size as the original or it might not fit inside the club head's hosel.
How to remove a broken shaft from a vise?
Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets ...
Can you replace a golf club shaft?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
How much does it cost to reshaft a golf club?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company.
Why do golf clubs have stiff shafts?
For those who swing the club powerfully and with speed, they need more control over the club. That is why they tend to choose stiff shafts. Those who have a less powerful swing need to choose regular shafts to flex the hit. Heavy shafts or stiff shafts can sometimes make it difficult to gain speed.
What is the difference between a stiff shaft and a regular shaft?
This depends on the swing speed and power of the player. Stiff shafts are for those who swing with more speed. Regular shafts are better for golfers who swing with less speed.
Why reshaft irons?
Reasons for Reshafting Irons. You may think that reshafting is expensive. But, there are certain situations where it is better to get the irons reshafted than buying new ones. The golf club is new, but the shaft is not working well for your playing style. Your swing has changed drastically and is now negatively effecting your game.
Why are steel shafts so heavy?
Steel shafts are heavier and can be a problem for those who have hand and shoulder issues, especially among older players and women, as they tend to have less speed. That is why it can be quite effective for them to shift to graphite shafts.
Should a golf club be fitted to a person's swing?
Every person has their own way of playing, and the golf club should be fitted to each person’s playing style. In case the swing is not performing well or the ball is getting hit the wrong way, it is time to think of getting the shaft replaced.
Can you fix a golf cart on your own?
Under NO circumstances should you attempt to fix your golf cart on your own. Doing so is dangerous and could result in serious bodily harm. The information on this website has not been verified for accuracy and should only be used for general information purposes only. Use this information at your own risk.
