how long should a golf iron be to you

Golf Club Length 101: Chart to Determine Your Ideal Length

Club Type	Avg. Length	Club Type	Avg. Length
Driver	45”	Sand Wedge	46”
Putter	44”	Gap Wedge	45.5”
1 Iron	39.5”	3 Wood	43”
2 Iron	39”	4 Wood	42.5”

Apr 27 2022

Full Answer

What is the standard length of golf irons?

The measurement can vary between manufacturers, but most are around 38″-41″ inches long for men’s irons, 33-34″ inches long for women’s iron sets, and 28-33″ inches for junior models depending on age.

How long should my golf driver shaft be?

What Size Shaft Do I Need for My Height?

• Driver Shaft Length Basics. Does the difference in shaft length have a bearing on distance and accuracy? The answer is… it depends.
• Making a Shorter Driver Shaft – Cutting It Down. Whether you add length or cut length, some changes automatically occur within the shaft. ...
• FAQ. How much should I shorten my driver? ...

Is 38" the standard 4-iron shaft length?

For example, standard length for a steel 2 iron is 39 inches; a 3 iron is 38.5 inches; a 4 iron is 38 inches and so on to the steel 9 iron with the standard length of 35.5 inches. The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches.

What is the length of a 5 iron golf club?

There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long. We cannot stress enough, the importance of a golf club’s length and its effect on your performance.

How long should my golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

How do you know if golf clubs fit you?

To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.

How do I know if my irons are too short?

If the heel of the club is off the ground, chances are your clubs are too short. The ideal position is to have your club sitting flat on the ground. If your heel is sitting up a bit, you'll probably find yourself pushing a lot of shots (straight right for the right-handed golfer).

How do I know if my irons are too long?

Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.

How long should my iron shafts be?

Iron Shaft LengthIRONSHAFT LENGTH for Men (steel/graphite)SHAFT LENGTH for Women (steel/graphite)5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches8-iron36.5/37 inches35.5/36 inches4 more rows

What is standard iron length?

The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches. A 9 iron club is categorized as a short iron golf club.

What is the standard length of a 7 iron?

What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.

What is standard club length?

Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm. However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer's ability to hit the ball on the sweet spot of the club face.

How do you determine golf club length?

To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.

Should I choke down on my irons?

The spin rate is lower and the ball flies consistently toward the green. Since irons are still relatively long compared to your wedges, you don't want to choke down much more than an inch or two (at most).

Are 30 year old golf clubs still good?

There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.

Do pro golfers use shorter clubs?

Tour players, who play golf courses that are hundreds of yards longer than the courses we play, and play for millions of dollars, have drivers that average about 44 inches in length.

What golf clubs do you need if you are shorter than the beginning height?

If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.

What is the average size of a golf club for women?

As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.

How to measure wrist for golf club?

Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).

How long should a golf iron be?

For most golfers, the length of a golf iron should be 38.75 inches. The height of the player is one of the primary factors that determine the length of the golf irons. There is no average length that can be considered to be suitable for a large number of players. A player who is 6 feet and 3 inches tall will often not be very comfortable using ...

How long is a 5 iron golf club?

With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle. The 5 Iron is a mid-range golf club featuring an iron clubhead.

How to tell if golf iron is too short?

If the swing path is inside to outside , if your tempo is too fast, if your posture is too bent over or if the ball goes to the right , you can conclude that the golf iron is too short for you.

What is the Standard Length of a 3 Iron?

The standard length of a steel 3 iron is 38.75 inches and 39.25 inches for graphite irons.

Should I shorten my irons?

If you think shortening the irons would work better for you, you may go for it. However, there are a few things you must keep in mind when you decide to shorten your iron.

Should Your Irons be the Same Length?

When it comes to single-length irons, the strike rate is seen to be far more consistent than with irons of different lengths.

Why do golf clubs have long shafts?

Golfers often use long shafts in their golf clubs as they feel that the club with a longer shaft would help it to cover a large distance. This is not exactly true but lengthening golf irons does have a direct impact on your game and performance. There are different ways in which you can lengthen your golf iron.

How tall should a golf iron be?

Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

How many inches to a standard length golf club?

Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.

How to measure golf clubs?

Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.

What is the most important spec to pay attention to when you’re shopping for a new set of golf clubs?

According to the pros, the length of golf clubs is the most crucial spec to pay attention to when you’re shopping for a new set of clubs or an extra driver or hybrid.

How many inches is a three wood?

Three Wood: This club measures in at forty-two inches, which is two inches shorter than other types of woods.

What should be taken into account when buying a new golf club?

When you’re getting fit for a new set of clubs, launch angle, dispersion, spin rate, and ball speed should also be taken into account in order to ensure you purchase the correct length.

How to tell the length of a golf shaft?

The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.

How long is a standard golf club?

5 foot 9 inches to 5 foot - A standard club length will suffice.

How do you know if your golf clubs are too long?

To start with, if your club is too long then you are going to find yourself forcing your body to be pretty much completely straight when you are taking a shot.

Why is it so hard to make contact with the golf ball?

As the length of the shaft increases, a lot of golfers can have a difficult time making their delivery consistent with the club, and this means that it can be more challenging to make contact with the ball. In this case,

What to do if you aren't sure what fit is best for you with a putter?

If you aren’t sure what fit will be best for you with a putter then you should try to have a proper fitting with somebody who knows what they are doing. Again, length can have a big impact on this particular golf club.

What happens if you have a shorter shaft?

If you have a shorter shaft then it is going to feel stiffer, so you are probably going to need to change your power and swing to work with a stiffer club.

How to tell if a golf club is too short?

First of all, the path of your swing goes from in to out. You will find that when you are trying to take your shot that you are needing to excessively bend at the waist area.

What happens if your golf club is too long?

If your club is too long, then you will also find it difficult to move the lower half of your body when you are using the correct swinging mechanics. You will also find that when you are taking a shot that the ball is going to move too far to the left and much too high than what you need.

How long can you keep irons in golf?

More casual golfers that are not so highly competitive could quite comfortably keep their irons for up to eight years, and at a push ten years, before falling too far behind with technology.

How long do golf irons last?

A good estimation is for low handicap and regular golfers to replace the set of irons after approximately three hundred rounds or around four to five years.

Why do golf clubs lose spin?

Your clubs will lose performance over their lifespan and when you cannot achieve the distances that you are used to, can’t work the ball around as much as you could previously, or lose the spin characteristics due to grooves being damaged, it’s time!

How often do golf irons come out?

Golf equipment technology advances at a rapid pace and manufacturers release new irons annually, in the worst-case bi-annually. Price increases are the norm, and you pay substantially more for a set of irons today than what it cost five or six years ago.

What happens if you put dirt on your golf club?

Any dirt on the clubface can result in scratches, dents, and other damage to the grooves. Dirty grooves reduce the spin and performance of the club as well. Wiping your clubface with a wet towel after every shot, cleaning the grooves, and drying it properly will reduce the damage.

Why do you need to clean your golf clubs?

Regular cleaning will prevent unnecessary damage to the grooves and keep the spin pattern lasting longer. It is frustrating when you cannot control your distances due to dirty clubs.

How to extend the life of irons?

You can extend the lifespan of your irons by taking care of them while playing or when they are in storage.

How fast is a golf club if it is half an inch shorter?

Aside from distance, speed of the ball is also affected. If your golf club is half an inch shorter, the speed will be reduced by 1.5 to 2 MPH.

How far should I aim for a golf ball?

I always tell new players to aim for (110 yards for females) and (160 yards for males).

How to measure golf distance?

How To Measure Your Golf Distance. The best way to measure your golf distance is to use a GPS measuring device, smart watch GPS or a laser rangefinder. These devices will show a golfer how many yards their ball has travelled as well as the distance an object is from their current location on the course.

How far can a pro golfer drive a golf ball?

The average distances an amateur golfer drives a ball is 200 yards. A pro golfer on the PGA tour hits the ball further, with an average distance of 270 yards off the tee.

What is the best way to measure golf ball distance?

If you’re after a more convenient way of measuring your golf ball distance, a GPS smart watch is the perfect option. Some golfers don’t wish to carry around heavier GPS equipment which makes a watch an ideal alternative.

What is the most used wedge in a set of golf clubs?

A pitching wedge is the most used wedge in a set of golf clubs.

How many yards should you hit a golf club?

You should hit your golf clubs within 20 yards of the average for that particular club type. This means you should hit a driver at least 200 yards to be considered a good golf player. Furthermore, a 7 Iron shot should send the ball flying at least 120 yards.

What is distance in golf?

Distance: Quite simply, the maximum distance that you can drive the ball. Since clubs are designed within half an inch of each other, the adjustments are small, but the overall force changes dramatically. This is relevant to your arm length and size when swinging. A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club. This increases the ball’s velocity upon impact, and you can hit it farther.

Why use irons on flat ground?

Irons are used on flat ground and are supposed to give you a way to get the ball closer. If the club shaft was longer, you’d hit the bottom hemisphere of the ball on your downward swing and send it flying through the air. That’s not what we want.

When do You Need Custom Golf Clubs?

When you can’t seem to find a 9 iron or a putter that’s designed for your height. Using the information that we provided above, you can determine your

How does a lengthened golf club work?

A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.

Why do you need to lengthen a golf ball?

The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.

What happens if you use too long golf clubs?

If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.

When shortening a golf club, do you have to remove the crown?

When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.

How many yards does a 5 iron go?

If your 5-iron goes only 70 yards, a regulation course isn’t fun. But one with tees—even if in the fairway—measuring 2,520 yards would be a great way to keep people in the game. Think about it. A few years ago, the USGA attempted to get golfers to “Play if Forward.”.

How far can you play the back tees?

Of course, many Neanderthal males often insist on playing “the back tees,” almost always stretching past 6,500 yards and often measuring somewhere in the 6,800-to-7,000-yard range. Playing from the tips might be a boost to the ego, but it’s also pretty much a guarantee to be a killer for your score, and pace of play for the entire course, if you have no business being back there.