So here’s the general iron shaft length chart:
| IRON | SHAFT LENGTH for Men (steel/graphite) | SHAFT LENGTH for Women (steel/graphite) |
| 2-iron | 39.5/40 inches | 38.5/39 inches |
| 3-iron | 39/39.5 inches | 38/38.5 inches |
| 4-iron | 38.5/39 inches | 37.5/38 inches |
| 5-iron | 38/38.5 inches | 37/37.5 inches |
What is the standard length of golf irons?
The measurement can vary between manufacturers, but most are around 38″-41″ inches long for men’s irons, 33-34″ inches long for women’s iron sets, and 28-33″ inches for junior models depending on age.
How long should my golf driver shaft be?
What Size Shaft Do I Need for My Height?
- Driver Shaft Length Basics. Does the difference in shaft length have a bearing on distance and accuracy? The answer is… it depends.
- Making a Shorter Driver Shaft – Cutting It Down. Whether you add length or cut length, some changes automatically occur within the shaft. ...
- FAQ. How much should I shorten my driver? ...
Is 38" the standard 4-iron shaft length?
For example, standard length for a steel 2 iron is 39 inches; a 3 iron is 38.5 inches; a 4 iron is 38 inches and so on to the steel 9 iron with the standard length of 35.5 inches. The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches.
What is the length of a 5 iron golf club?
There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long. We cannot stress enough, the importance of a golf club’s length and its effect on your performance.
How long should golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do I know if my golf clubs are the right size?
To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.
Are my irons too long?
How Do You Know If Your Golf Clubs Are Too Long? The most common way to tell if your clubs are too long is that your back will be too upright, the toe of your club will be off the ground at address, and you will often make contact towards the toe of the club.
What is the standard length of a golf club?
Standard Club LengthClubMen GraphitLady SteelWood 1#4442,5Wood 3#4341,5Wood 5#4240,5Wood 7#, 9# usw.4139,528 more rows
What is standard iron length?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches.
Does club length matter in golf?
When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect.
Should you shorten your irons?
Additionally, shorter length golf clubs can provide more control to the golfer, essentially making the golf club more forgiving. While longer clubs can help increase speed and launch angle, shorter clubs can be easier to hit solid due to the reduction in swing arc.
What happens if irons are too short?
If your golf club is too short for you, then your stance will be too bent over. Your stance will be this way because you are reaching down for the golf ball. The problem with a poor posture like this is that it will ruin your spine angle. Once your spine angle is off, you may have trouble rotating correctly.
What is the standard length of a 7 iron?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
How do you know if your golf clubs are too short?
6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.
What is the standard length of an 8 iron?
What is the standard length of an 8 iron? The standard club length of an 8- iron is between 35.5” to 37”.
Are graphite irons longer than steel?
Graphite iron shafts tend to be about a 1/4 inch to a 1/2 inch longer than a steel shaft. For most players, this is not going to be a problem. However, if you choose steel or graphite shafts, you should make sure that they are custom fit to your exact height specifications.
How to Figure Out the Ideal Club Length
You will find that the vast majority of players start off by figuring out their height and wrist to floor measurement when it comes to buying the correct golf club length.
Should I Get a Custom Fit?
A custom fit can be great, but you need to remember some things. If you are ordering a club that is custom to you, the club shaft is going to be made in such a way that the flex is going to match the club length.
Conclusion
As we’ve covered above, getting the right fitting for your golf clubs is essential in making sure that you get the best results from your golf game. Hopefully the above guide has helped you to find out what the correct golf length should be for your height.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
How long is a golf shaft?
This is the length of the golf shaft you will need. The average male has a measurement of 43 inches. Depending on your arm length and height, this may vary but it should be around that number. If you get a number that is wildly off from this one, check your stance and remeasure.
How does length affect golf?
The right length of the golf clubs can make all the difference in a golfer's game. Each club's length can greatly influence how far a golfer hits the ball and how straight they can hit. By following these simple steps, you can help get the right clubs for you.
How much should the toe of a golf club be raised?
With your middle irons, the toe of the club should be slightly raised, about 1/2 to a 1/4 of an inch. With longer hitting irons (2, 3, 4) the club head will rest completely on the ground, while with your others (8, 9, PW) the toe will be more elevated.
Why is it important to hit balls with the club before buying one?
It is important to hit balls with the club before you buy one to get a feel for how the different lengths affect your shot. The longer the club the more power you can hit with, but it will also be harder to control. Always give up distance for accuracy when choosing the club.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How long is a standard iron club?
Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.
How to tell if a golf club is too long?
Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.
How long is a golf driver?
On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How long is a three wood putter?
Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.
Do beginners need to size their golf clubs?
These are questions many newbies have but don’t know the answer to. Beginners usually struggle with sizing their golf clubs correctly. Unfortunately, when it comes to clubs, size is very important. In fact, the right size of clubs can significantly improve your game, while the wrong size of clubs can negatively impact your performance, ...
How long is a 5 iron?
Clubs other than drivers gradually get shorter -- if a 44-inch steel shaft driver is indicated by the chart, your 5-iron will measure 38 inches and sand wedge 35.5 inches. Graphite clubs are slightly longer, with a standard driver at 45 inches, 5-iron at 38.5 inches and a sand wedge 36 inches. Standard club lengths for women are one inch shorter ...
How to determine the length of a golf club?
To determine the approximate length of clubs that are right for your height, you need to know how tall you are and how far your wrists hang from the floor. As Golf Components explains, you can obtain your wrist-to-floor measurement by standing on a hard, level surface in regular shoes or golf shoes. Relax your shoulders and let your arms hang down.
What happens if your golf clubs are too short?
In fact, if your clubs are too short or too long, expect to spend lots of time in the rough, bunkers and water hazards, if not out-of-bounds. As club equipment guru Tom Wishon explains, the length, loft, lie of your clubs are critical factors in determining how far and high your shots will fly.
How Long Should My Golf Backswing Be?
I get far too many emails on this topic to ignore it – and it is one of the most common discussions I see on my lesson tee and with amateurs chatting amongst themselves on the range.
Before We Do
I’m giving away copies of my Ebook “Golf Hacks” for FREE (normally $9.95).
Power Play
A general rule would have it that the longer you swing the club, the more potential you have for generating clubhead speed.
Precision Play
It makes sense (and is generally the case) that a shorter backswing would provide more control, even if it costs us speed.
3 Different Types
So, for the most part, we are trading off the potential for more speed with a loss in strike quality and clubface orientation consistency (direction).
The How
One thing that hasn’t been discussed here is “how” we create a shorter or longer swing. This would also have an effect on the positive or negative influence on the results.
My Own Experience
When I was younger, I used to swing the club so long that I could see the clubhead out of the corner of my eye at the top of the swing.
What is the biggest lie in golf?
The first question, the answer to which Max Homa calls the “biggest lie in golf”, is something every golfer should know. Just because you have hit a drive 280 yards one time does not mean you hit your driver 280 yards. That goes all the way down the bag. Take more club than you think, because there’s no pride in leaving 99 out of 100 shots short ...
Is Instagram a good golf guide?
Instagram. It’s not perfect, because it assumes a few things: That you’re hitting the ball consistently well, without much curve and with a driver that’s fit to your swing. But nevertheless, it can provide a good guidepost for golfers.
Do golfers want to hit the ball longer?
As soon as golfers accomplish the act of hitting the golf ball, they want to hit further. It’s only natural and in some ways, inescapable. But while many golfers want to hit the ball longer, there are often two related questions that sometimes escape them: How far do they hit it?
Why Should I Care About Golf Club length?
Determining The Ideal Length For Your Club
- Many players base the starting point of determining your golf club length by referring to the chart that matches your height and wrist-to-floor measurement from your club manufacturer. For a detailed and conclusive deduction, it is prudent to compare your H/WTF ratio as you take test shots with the particular clubs. This enables you to have a good understanding of your lie angle, …
How Do You Do this?
- Step by Step Tutorial First, measure your basic height, i.e., your height from your head to your feet while standing as upright as possible. Secondly, measure the distance between your wrists from where it bends to the ground while standing straight also. Ensure that your arms are hanging loosely at your sides. Having a partner do this, will enable you to get the most accurate results. T…
How Do I Determine The Ideal Length For My Golf Club
- Drivers
First of all, have a variety of Drivers, (between 3-5 clubs) that you intend to use. Ensure that they are 1-2” of the regular length. Remember that drivers are available with either graphite or metal shafts and the latter are generally heavier than the former. Swing all clubs with the help of an ins… - Irons
The process of taking measurements to determine the best ironsfor you is similar to those of drivers. Different irons are ranging from 1-9-iron clubs depending on the manufacturer. Identify three irons in the mid-range, i.e., 4-6-iron clubs and one from the extremes, i.e., 1-3-irons and 7-9 …
Bottom Line
- To achieve an accurate club fitting as a player, insist on having them fitted using both dynamic and static measurements. This is because there is a direct correlation of these factors to the direction, flight and speed of the golf ball and also enables you to swing your club consistently without the need for compensation swings. Seeking the services of a professional fitter and inst…