Based solely on the overall height, here’s the golf club length chart:
| OVERALL HEIGHT | GOLF CLUB LENGTH ADJUSTMENTS |
| under 4’10” | minus 2″ |
| 4’10” to 5″ | minus 1-1/2″ |
| 5’0″ to 5’2″ | minus 1″ |
| 5’2″ to 5’4″ | minus 1/2″ |
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
What is the average size of a golf club?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches. Most male golfers are wielding drivers that measure 45 to 48 inches, the maximum allowed under the United States Golf Association's Rules of Golf.
What length golf clubs do you need?
- 3-wood
- 4- and 5-hybrids
- 6- to 9-irons
- Pitching wedge
- Sand wedge
- Driver
- Putter
How to shorten the length of a golf club?
- Remove The Grip
- Remove The Grip Tape
- Measure Twice and Cut Once
- Make The Cut
- File Off Any Lose Edges On The Cut Line
- Place A New Grip On The Club
- Add Weights to balance any change in swing weight
- Go Try Out Your New Shorter Length Club
How do you measure club length at home?
0:522:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
What length should my golf clubs be?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
Does golf club length include the head?
Measuring different types of golf clubs requires an understanding of what we are actually measuring. In today's terminology, the “length” of a golf club is not the length of the shaft, but the length of the shaft and the club-head combined.
How do I know if my golf clubs are too long?
Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.
How do I know if my golf clubs are too short?
If the heel of the club is off the ground, chances are your clubs are too short. The ideal position is to have your club sitting flat on the ground. If your heel is sitting up a bit, you'll probably find yourself pushing a lot of shots (straight right for the right-handed golfer).
How do I know my driver length?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.
What is the standard length of a 7 iron?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
How long should my driver be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
Can you put a putter straight up?
Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.
Do you need to buy a new shaft for a golf club?
All good-quality golf clubs can be re-shafted. You do not need to buy an entire new club if you need a new shaft. This luxury saves on expense, especially when it is only one club that needs replacing.
How long should a golf club be?
According to USGA the length of a golf club should not exceed 48 inches. So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.
What size ruler do you need for golf club reading?
For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.
What is the best length for putters?
For putters. Analyzing the posture and wrist-to-floor measurement, 32-35” can be a good length for putters that most golfers will be comfortable with. Longer putters will cause several problems in your gameplay. It will restrict you from being close to the ball and miss targets in most cases.
What happens if you lie your golf club higher than the heel?
Placing the club with its toe higher than the heel will lessen your club length measurement. Number 2: If you do the opposite which means if the heel is higher above the ground than the toe then your club length will increase.
How long was the driver's club in the 1970s?
Manufacturers have invested in research and understanding user psychology to get the correct length of the club. During 1970s-80s, the drivers had 43 inches of length. For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers.
Where is the ruler on a putter?
The ruler method can be used for putters. Instead of the heel, the ruler is placed beside the center of the putter. This means your ruler must be placed along the shaft to the ground. The ruler must be placed behind the club, and the final reading must be taken from the edge of the grip cap.
Is there a standard length of a golf club?
There is no standard length of a club in golf. So, club makers are free to make clubs that they feel are appropriate for a golfer. Here is what Tom Wishon, the founder of Tom Wishon Golf Technology, has to say- “There are no industry-wide standards for any golf club specification in the golf equipment industry.”.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
How tall is a man?
The average height for a human being varies from man to woman. A man’s average height stands at approximately 5’10” while that of their female counterparts stands at 5’5″. With these figures in mind, manufacturers design clubs with a 1″ difference in length between men and women.
Can a golf fitter ask you to swing a golf club?
The fitter can do more to make the measurements even better. In step two above, we note that the fitter can ask you to swing a standard golf club to understand your posture and how you swing the club. The measurements are necessary for coming up with the correct plus or minus adjustments.