Golf Shafts are usually replaced at professional golf shops, and the average golf club shaft replacement cost ranges from $20 to $80, depending on your requirements. Some shafts can even cost more than $500. However, the cost factor can differ according to the material too.
How much does it cost to reshaft a golf club?
So, how much does it cost to reshaft a golf club? To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
How much does re-shafting golf clubs cost?
The cost of re-shafting a golf club will depend on the number of clubs, the type of materials, as well as the professional that is doing the job. How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club .
How much does a golf club shaft replacement cost?
With a vast array of shafts to choose from, there are options to fit every budget. For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories.
How do you replace a golf club shaft?
How To Re-Shaft Your Steel Golf Clubs
- Carefully clamp the shaft into a vise using a Shaft Vise Clamp. ...
- When removing steel shafts from clubheads, use a torch to heat the hosel. ...
- After 30 seconds of heating, with your gloved hands grasp the head and twist/pull the head. ...
- Using a wire brush remove excess epoxy from the inside of the hosel.
Is it worth it to Reshaft golf clubs?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How much does it cost to swap shafts?
Expect to pay anywhere between $40-$100 reshafting a graphite shaft, if the shaft is steel expect to pay anywhere between $20-$75 per shaft, every replacement shaft needs a new grip which costs $8-$15, and labor costs $5-$35 depending on where you live.
Can you change golf club shafts?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
Is it worth changing shafts on irons?
According to most golfers, it is worth reshafting irons if your iron shaft is damaged, or if the shaft is not suitable for your swing.
How much does it cost to re shaft a driver?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
How long does it take to Reshaft a golf club?
If in stock, our Certified club repair technicians can have your new shaft installed and ready for play within 48 hours.
Is it easy to Reshaft irons?
Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.
Can you change shafts on drivers?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
Can I replace my steel shafts with graphite?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It's a little involved, but completely doable.
Are 30 year old golf clubs still good?
There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.
Which is better graphite or steel shafts?
Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.
How often should you replace your golf clubs?
A good rule of thumb to follow is if you're a golfer with a low handicap or just a casual golfer is to replace your golf irons somewhere around every four to five years or after around three hundred rounds.
How much does it cost to replace a golf shaft?
Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club far more expensive.
How much does it cost to install a golf grip?
Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip.
How long to let a golf shaft rest?
Don’t use too much and cause a mess. Reinsert the shaft, now align the shaft graphics to how you want, let it rest in the playing position for 24 hours. After, apply some acetone to a paper towel and hold the towel to the ferrule and spin it.
Can epoxy glue be used to keep a golf club together?
Epoxy (glue) come in different types and have different uses, not all of them will work for keeping a Golf club together.
Can you use lighter fluid instead of grip solvent?
Yes, you could use lighter fluid instead of grip solvent but they make the grip smell like gas for a long time. You have to cut a shaft to a specific length with a tube cutter, it’s even more difficult with one, you could cut the shaft off and drill out the club’s hosel (where the shaft is inserted).
How much does it cost to reshaft a golf club?
How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.
What is re shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.
How to remove old shafts on iron?
During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.
How much does a bore thru head cost?
Clubs that require a special adapter such as a bore-thru head can cost an extra $5 to $20. If doing the job yourself, tools such as the grips, dremel tool epoxy glue, tape and solvent will be needed in order to complete the job.
How much does it cost to replace a golf shaft?
For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories. Last but not least, for those who want only the best when it comes to their golf equipment, ...
How much does a ladies shaft cost?
Ladies flex shafts can range from $50 to over $400 (without installation).
What is a driver shaft made of?
When it comes to material, the overwhelming majority of driver shafts on the market are graphite, which is a composite of graphite fibers and epoxy formed into what is essentially a hollow tube that is comparatively stronger than steel, but only half the weight. (Source: golfclub-technology)
What is the effect of flex in a driver shaft?
The amount of flex in a driver shaft has a significant effect on not only driving distance but also the golfer’s ability to keep the ball in the fairway (or in bounds, for that matter).
What is a regular flex shaft?
Regular flex shafts are designated with the letter “R.”. Because this is the most popular and common class of driver shafts, regular flex shafts have the greatest variance in price, with models available for player skill levels ranging from entry-level beginners to professional-grade equipment.
What does replacing a driver shaft do?
Replacing a driver shaft can produce dramatic results ranging from increased driving distance to greater accuracy and control. The right shaft for your driver can significantly improve your golf game, elevating your performance while lowering your score. Sorting through all the different options takes patience and a willingness to consider all ...
What is the role of the shaft in golf?
After all, the shaft is responsible for transferring the tremendous amount of energy generated by the golfer’s swing to the clubhead, which in turn impacts the ball and launches it into the air.
How much does it cost to reshaft a golf club?
To reshaft a golf club, you’re likely to spend between $20 to $200 per club . The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts. Let’s take a closer look at how much it costs to reshaft a golf club.
What happens if your golf club shaft breaks?
When the shaft on your golf club breaks, you’ll need to replace it. It isn’t something that can be easily repaired. This part of the club controls all of the power of your swing as you hit the ball. Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely.
What is a multi-material shaft?
Multi-material – This type of shaft is a combination of steel and graphite shafts. Titanium – Since this material is lighter than steel, the shaft is lightweight and absorbs more vibrations than steel. Nanofuse – A Nanofuse shaft is made from a carbon fiber sublayer fused with a nanocrystalline alloy.
What is the shaft of a golf club?
The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs. It’s also tapered, with the top being wider than the bottom.
What are the different types of shafts?
You’ll find a list of the different types of shafts below. Steel – There are two types of steel shafts: stepped steel and rifle steel. Stepped steel is used to reduce the diameter of the shaft between the two ends; rifle steel is smooth from top to bottom.
Is a putter shaft cheaper than an iron shaft?
Of course, the price of the shaft is going to vary by brand. It will also depend on the length of the shaft as well as the intended use. For example, a shaft for a putter will be cheaper than a shaft for an iron. The material of the shaft will also change the cost of it.
Can you get back into golf after a long time?
Getting back into golf after a long time away from it can be exciting and frustrating in equal measure. You remember where you used to be, but you aren't there yet, and the equipment you used to...
How much does it cost to reshaft a golf club?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company.
Why do golf clubs have stiff shafts?
For those who swing the club powerfully and with speed, they need more control over the club. That is why they tend to choose stiff shafts. Those who have a less powerful swing need to choose regular shafts to flex the hit. Heavy shafts or stiff shafts can sometimes make it difficult to gain speed.
What is the part above the clubhead called?
Important things to consider before reshafting an iron. The part right above the clubhead is called hosel. After the hosel , there is ferrule that holds the hosel and shaft together. Check the shaft tip and make sure to measure everything properly. Installing steel and graphite shafts tend to have a different process.
What is the difference between a stiff shaft and a regular shaft?
This depends on the swing speed and power of the player. Stiff shafts are for those who swing with more speed. Regular shafts are better for golfers who swing with less speed.
Why reshaft irons?
Reasons for Reshafting Irons. You may think that reshafting is expensive. But, there are certain situations where it is better to get the irons reshafted than buying new ones. The golf club is new, but the shaft is not working well for your playing style. Your swing has changed drastically and is now negatively effecting your game.
Why are steel shafts so heavy?
Steel shafts are heavier and can be a problem for those who have hand and shoulder issues, especially among older players and women, as they tend to have less speed. That is why it can be quite effective for them to shift to graphite shafts.
Should a golf club be fitted to a person's swing?
Every person has their own way of playing, and the golf club should be fitted to each person’s playing style. In case the swing is not performing well or the ball is getting hit the wrong way, it is time to think of getting the shaft replaced.