how much does it cost to cut down golf clubs

How do you cut a golf club?

Cost is usually about 7-10 dollars per club. Cutting will generally stiffen the flex. All things considered a longer shaft should correspond to an increase in club head speed, and ultimately more distance. So you could definitely lose some yards, but that could be mitigated by the better control the shorter shafts give you.

What happens when you cut down a club?

But some do-it-yourself golfers also cut down golf shafts, then reinstall them in their clubs. They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics.

How much does cutting off a club make it stiffer?

Aug 08, 2018 · For instance, if you were to have Titleist reshaft a club, it could average close to $110 per club, minus the shipping. For example, the online golf store, GolfWorks.com, can perform a reshafting for $19.95. Another local golf club shop located in …

How much does it cost to replace a golf clubs grips?

First, clubs should normally be cut from the butt (or grip) end. Then weight (lead tape or other method) should be added to the clubhead to counterbalance the …

How much does it cost to shorten golf clubs?

However, add 1/8 inch to the cut to account for the grip cap. For example, if your 9-iron shaft is 38 inches long after trimming the tip, trim 2 1/8 inches from the butt end to produce a 36-inch club after the grip is installed.

How much does it cost to shorten golf irons?

SERVICEPRICEShorten ClubPrice of new gripShorten Club (save grip)$12.00Reshaft (Steel or Graphite)$15.00 plus price of shaftReshaft (Bore Through)$25.00 plus price of shaft33 more rows

Is it OK to cut down golf clubs?

If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

How much does it cost to Reshaft golf clubs?

The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.

Are irons worth Reshafting?

Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.

Where can I shorten my golf clubs?

First, clubs should normally be cut from the butt (or grip) end. Then weight (lead tape or other method) should be added to the clubhead to counterbalance the reduction on the grip end. This is especially critical in putters, where feel is all-important. And sometimes even adding weight might not be enough.Sep 21, 2007

What if my golf clubs are too long?

5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.Jul 30, 2021

Can I cut down golf clubs for kids?

0:453:20Is it OK to Cut Down Golf Clubs for Kids? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd cut it down it's not going to be so great for them all. So what's going to happen is as stiff asMoreAnd cut it down it's not going to be so great for them all. So what's going to happen is as stiff as this club is obviously too stiff for them you cut it down it actually plays even stiffer.

How to shorten a golf club shaft?

To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."

What is the difference between a golf shaft and a tip?

All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...

Should the reduction in length be made from the grip end only?

"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.

How much does it cost to reshaft a golf club?

How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.

What is re shafting a golf club?

Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.

How to remove old shafts on iron?

During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.

How much does a bore thru head cost?

Clubs that require a special adapter such as a bore-thru head can cost an extra $5 to $20. If doing the job yourself, tools such as the grips, dremel tool epoxy glue, tape and solvent will be needed in order to complete the job.

How to shorten a golf club?

How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

How to cut a club shaft with a rotary tool?

Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.

Why is the shaft narrower at the head end of a golf club?

The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.

How to wrap a golf club grip?

Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.

How many swingweight points do you lose when you remove 1/2 inch?

For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.

How does shortening a golf shaft affect swing weight?

Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.

What happens if you trim 1/2 inch golf clubs?

Therefore, if you trim a 1/2 inch, you are EFFECTIVELY flattening the lie angle 1/2 degree. If you wish to maintain the current lie angle you must bend the trimmed clubs 1/2 degree upright. If you are only trimming 1/4 inch I wouldn't even consider worrying about it. It's so minimal it's pointless.

Is a wedge shorter than a standard?

Wedges are already very short. Almost no one wants them shorter than standard. If anything, maybe people play them a bit over standard for better posture. I'm 5' 7" and I like my wedges 1/2 over standard.