How Much Does It Cost To Get Golf Clubs Reshafted?
| SERVICE | PRICE |
| Reshaft (Steel or Graphite) | $15.00 plus price of shaft |
| Reshaft (Bore Through) | $25.00 plus price of shaft |
| Customer Provided Reshaft Steel or Graph ... | $25.00 per shaft |
| Customer Provided Reshaft Bore Through | $35.00 per shaft |
How much does it cost to reshaft a golf club?
5 rows · Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new ...
Should I get my golf clubs reshafted?
Aug 08, 2018 · Most re-shafting jobs, however, are going to be in the $15 to $45 price range per club. For instance, if you were to have Titleist reshaft a club, it could average close to $110 per club, minus the shipping. For example, the online golf store, GolfWorks.com, can perform a reshafting for $19.95.
How much does it cost to re-grip golf clubs?
Feb 02, 2022 · To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
Is it worth reshafting Irons?
4 rows · Oct 23, 2020 · To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of ...
How much does it cost to re epoxy a golf club?
Does one of your Golf clubs need reshafting but you're not sure how much it should cost?...How Much Does It Cost To Get Golf Clubs Reshafted?SERVICEPRICEReshaft (Bore Through)$25.00 plus price of shaft3 more rows
Is it worth it to get irons Reshafted?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How much does it cost to get golf clubs cut?
The average cost to regrip your golf clubs will be between $35-$190. The price you pay will depend on what grips you choose and whether or not you regrip them yourself. Expect to pay $35 if you do everything yourself and get the cheapest grips.
How much does it cost to get golf clubs extended?
Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft.
Can I change my steel shafts to graphite?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It's a little involved, but completely doable.
Are steel or graphite shafts better?
Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.Mar 30, 2021
Can you get new shafts on irons?
Update Your Golf Club With a New Shaft. Try a new shaft on your golf club. It's an inexpensive way to learn which kind fits you best. The right shaft can improve your game.
Is it worth regripping golf clubs?
Does Regripping Golf Clubs Actually Help? Yes, regripping golf clubs helps a lot, particularly before the beginning of every season. As you get to hold the grip with the least amount of pressure, you can swing the club correctly with acceleration.
How do you shorten golf clubs?
How to Shorten a Golf ClubSecurely fasten the golf club in place using a vise on a workbench or similar setup, such as a golf club regripping station used at golf courses or pro shops.Cutting off the rubber golf grip using a sharp blade, such as a utility knife with a hooked blade.More items...•Jul 19, 2021
How long should my golf clubs be?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
How do I extend my golf clubs?
8:2011:02How to ADD Extensions To Golf Clubs - Start to Finish! - YouTubeYouTubeStart of suggested clipEnd of suggested clipI use the narrow grip tape. So you're gonna have to use two pieces. Put there and then you grabMoreI use the narrow grip tape. So you're gonna have to use two pieces. Put there and then you grab another piece. And you put it on the top remembering. Don't let that half inch.
Can you add extensions to golf clubs?
We recommend using a steel extender to extend a steel shaft. Using other materials may lead to premature breakage. Wooden dowels can also be used to extend steel shafts, but these require much more work (in our opinion) than using steel extenders.
How much does it cost to reshaft a golf club?
How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.
What is re shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.
How much does a bore thru head cost?
Clubs that require a special adapter such as a bore-thru head can cost an extra $5 to $20. If doing the job yourself, tools such as the grips, dremel tool epoxy glue, tape and solvent will be needed in order to complete the job.
How to remove old shafts on iron?
During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.
How much does it cost to reshaft a golf club?
To reshaft a golf club, you’re likely to spend between $20 to $200 per club . The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts. Let’s take a closer look at how much it costs to reshaft a golf club.
What happens if your golf club shaft breaks?
When the shaft on your golf club breaks, you’ll need to replace it. It isn’t something that can be easily repaired. This part of the club controls all of the power of your swing as you hit the ball. Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely.
What is the shaft of a golf club?
The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs. It’s also tapered, with the top being wider than the bottom.
Is a putter shaft cheaper than an iron shaft?
Of course, the price of the shaft is going to vary by brand. It will also depend on the length of the shaft as well as the intended use. For example, a shaft for a putter will be cheaper than a shaft for an iron. The material of the shaft will also change the cost of it.
Can you get back into golf after a long time?
Getting back into golf after a long time away from it can be exciting and frustrating in equal measure. You remember where you used to be, but you aren't there yet, and the equipment you used to...
Can you reshaft a golf club by yourself?
However, if you’re unsure of the process, it might be best to get a professional to take a look. It will vary slightly depending on if you’re using a steel or graphite shaft. If you’re inclined to reshafting your club by yourself, you also risk doing the job incorrectly, which could be more costly to fix.
How much does it cost to reshaft a golf club?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company.
Why do golf clubs have stiff shafts?
For those who swing the club powerfully and with speed, they need more control over the club. That is why they tend to choose stiff shafts. Those who have a less powerful swing need to choose regular shafts to flex the hit. Heavy shafts or stiff shafts can sometimes make it difficult to gain speed.
What is the part above the clubhead called?
Important things to consider before reshafting an iron. The part right above the clubhead is called hosel. After the hosel , there is ferrule that holds the hosel and shaft together. Check the shaft tip and make sure to measure everything properly. Installing steel and graphite shafts tend to have a different process.
What is the difference between a stiff shaft and a regular shaft?
This depends on the swing speed and power of the player. Stiff shafts are for those who swing with more speed. Regular shafts are better for golfers who swing with less speed.
Why reshaft irons?
Reasons for Reshafting Irons. You may think that reshafting is expensive. But, there are certain situations where it is better to get the irons reshafted than buying new ones. The golf club is new, but the shaft is not working well for your playing style. Your swing has changed drastically and is now negatively effecting your game.
Should a golf club be fitted to a person's swing?
Every person has their own way of playing, and the golf club should be fitted to each person’s playing style. In case the swing is not performing well or the ball is getting hit the wrong way, it is time to think of getting the shaft replaced.
Can you fix a golf cart on your own?
Under NO circumstances should you attempt to fix your golf cart on your own. Doing so is dangerous and could result in serious bodily harm. The information on this website has not been verified for accuracy and should only be used for general information purposes only. Use this information at your own risk.
What to do if your club head is loose?
If your club head is loose or has become unattached from the shaft, don't go buy a new club. Golf Galaxy's Certified Club Technicians can install the head correctly and re-epoxy the head so it is returned to a like-new state.
What to do if your golf shaft is broken?
If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician. We have the tools to remove graphite or steel shafts without damaging other components of your golf club.
XYB34A
that is not to bad, considering the time it will take. cleaning up the ferrules to look nice, installing the grips properly. the actual equipment it takes, at no cost to you, to be able to do such.
jones137
IMO, that's pretty expensive. I think of everything in terms of hourly pricing.......let's be very conservative and assume 2 hours labor to do the job (No way it takes 2 hours) and he isn't paying retail for the shafts. So $80 an hour......$50 an hour would be fair but $80 an hour is high imo.
rumessingwitme
I go to GG. I got to know the Main Club builder of that specific GG and spoke to him about his golf History. He has been doing this for over 25 years. I have taken MANY Clubs there to get Repaired/Shafted/Re-Gripped. He has done a TOP Notch Job every time. He has even done Rush work for me.
neova
Normally it's $15-$25/club plus cost of grip and shaft. The more reputable the clubmaker the higher price. Reshafting is not worth it unless you have rare heads thatcare hard to replace. Otherwise buy a used set with the shafts/heads you want and sell you current set.
PingG10guy
This is the same shop that quoted a friend of mine $100 to install a driver shaft that he was providing along with just the head of the driver. I realize that time is money and you have to pay for their service, but I am still thinking that this is a little excessive.
stage1350
It depends on whether they are doing a stick and glue or a full blueprint with exact swingweights.
coozapalooza
I've always thought the cost of both reshafting and regripping clubs was too much for what it actually does. That being said, it's mostly the same everywhere, so unless you're doing it yourself, you're stuck paying. I plan on figuring out how to do it myself sooner or later.
How to put shaft on club head?
Insert the shaft into the club head's hosel. Rotate the shaft while sliding it in and out of the hosel, evenly coating the shaft and hosel with epoxy. Align the shaft graphics the way you want them by rotating the shaft. Then, tap the butt end of the shaft on the floor to seat the tip against the bottom of the hosel bore.
How to remove graphite shaft?
Graphite Shafts: To remove a graphite shaft, place the shaft in a graphite shaft extractor following the instructions that came with the tool. Heat the hosel with a heat gun while wearing leather gloves. Slowly turn the extractor's threaded bolt with a box wrench. If the head does not loosen, reapply heat to the hosel.
How to remove a steel shaft from a metal?
Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. If there is a plastic ferrule in place, wrap a wet paper towel around it to prevent burning. While wearing protective leather gloves, aim the flame of a torch at the hosel.
How big is a wood shaft tip?
Most iron shafts have a .370 of an inch tip and most wood shafts have a .335 of an inch tip. Follow the tip trimming instructions to trim the tip end of your new shaft so it matches the size of the shaft you extract. After the tip has been trimmed, abrade or roughen the shaft tip.